kpilogo shields

Fourier transform infra-red (FTi.r.) spectroscopy was used to investigate the orientation of uniaxially stretched films of poly(vinyl phenol) (PVPh). The • angles of the various vibrations were determined with respect to the CH2""CH2 axis. No evidence was found for any influence of the hydrogen bonds on the orientation of PVPh when compared to polystyrene (PS). On the other hand, it was noted that, upon formation of hydrogen bonds, the ~ angle of the hydroxyl groups changes from 26 to 65 °.

Детальніше...  

The misicibility of poly(ethylene oxide) (PEO) with poly(methyl acrylate) (PMA) is demonstrated by using the Prigogine-Flory theory in Patterson's approximation. Negative values of enthalpy of mixing, contact-energy term and interaction parameter were obtained for the blend with 75/25 weight ratio. The temperature dependence of Z, 2/1/* indicates that PEO-PMA mixtures are miscible in the liquid state over the accessible temperature range.

Детальніше...  

Measurements of the X-ray photoelectron spectroscopy (Xp.s.) valence-band spectra of crystalline and amorphous poly(tetrahydrofuran) are reported. The experimental data are analysed on the basis of theoretically simulated Xp.s. valence-band spectra of model molecules. Differences in the spectra of poly(tetrahydrofuran) in amorphous and crystalline phases are interpreted in terms of differences in the conformational characteristics of the macromolecular chains

Детальніше...  

13C nuclear magnetic resonance (n.m.r.) has been used to study polypyrrole and N-substituted polypyrrole in the solid state. The extent of oxidation appears to be counterion-dependent; in particular, the quinoid structure appears favoured in the films prepared with dodecyl sulfate. Resonances associated with the quinoid unit are lost upon reduction of the polypyrrole film, which supports the idea that the quinoid structure is associated with the oxidized form of polypyrrole. N-substituted polypyrroles have a more distinct resonance at 110 ppm, which is linked to lower degrees of oxidation or charge delocalization in these systems. The decrease in conductivity of polypyrrole upon thermal ageing in air is associated with both the loss of counterion ('thermal dedoping') and the decomposition of the quinoid structure in the polymer backbone. There is no indication of carbonyl formation in the solid-state n.m.r, spectra obtained in the present study

Детальніше...  

The anisotropic character of the creep behaviour of polycarbonate, oriented at a temperature 12°C above the glass transition to different draw ratios, has been studied using the model of Boyd and Jansson. This model is based on molecular assumptions and results in a second-order relation, e = D1tr + D2tr 2, where D1 is the linear and D2 the non-linear compliance component. The segmental orientation was determined by infra-red dichroism and the chain extension by shrinkage. It was found that both the linear and non-linear compliance components decreased with increasing orientation, although the non-linear component is affected much more by the orientation. The same result was found both in tension and contraction.

Детальніше...  

This work presents a comprehensive computer simulation study for the hydrolytic polymerization of e-caprolactam with the vaporization of both water and e-caprolactam in an industrial semibatch reactor. It incorporates various correlations for heat and mass transfer, desorption from the free surface as well as bubbly desorption, and the build-up of pressure in the reactor. The solution of the mass and energy balance equations is carried out using Gear's algorithm. Optimal values of five parameters are obtained using the Box complex technique with industrial data for a feed-water concentration of 3.45 mass%. Simulation results are then obtained for two other feed-water concentrations using these curve-fitted parameter values. Excellent agreement is obtained with the corresponding industrial data. The activity coefficients of the monomer and water have been correlated with monomer conversion in this study. This eliminates infeasible solutions under certain conditions. The sensitivity of the model results to changes in the values of several parameters is also studied. The model developed can be used to optimize the performance of the reactor.

Детальніше...  

Linear crystal growth rates of two narrow molecular weight fractions of syndiotactic polypropylene having the same syndiotacticity have been measured using polarized light microscopy over a temperature range of > 20°C. It has been found that a regime III to regime II transition at a supercooling of ~ 50°C exists. Structure analysis via electron diffraction (ED) experiments indicates that no change of growth planes has been found during this regime transition. Nevertheless, a gradual change of the crystal perfection due to a chain packing change from a crystal incorporated with isochiral packing defects to a majority of cell III structure in this supercooling range has been observed. The validity of the nucleation theory applied to s-PP is discussed. For the crystal morphological study, single crystals with rectangularly faceted lamellae can be grown at high crystallization temperatures (low supercooling) in thin s-PP film samples as observed via transmission electron microscopy. Similar to the results reported by Lovinger and Lotz, the ED patterns show that the long axis of the single lamellar crystal is the b-axis. On decreasing the crystallization temperature, spherulites are developed. Cracks on the lamellar crystals have been observed, and they are always perpendicular to the b-axis. This phenomenon has been explained by invoking the observation that the coefficient of thermal expansion along the b-axis is about one order of magnitude larger than that along the a-axis, as measured via wide-angle X-ray diffraction experiments. However, at high crystallization temperatures, the cracks are found less frequently. This is due to the pure cell III crystal packing that forms at these tempratures leading to the incorporation of fewer isochiral packing defects which promote crack initiation.

Детальніше...  

13C cross-polarization/magic-angle spinning nuclear magnetic resonance spectroscopy has been used to investigate urea-formaldehyde (UF) resins prepared at room temperature from reaction mixtures containing N,N'-dimethylolurea or various pretreated paraformaldehyde agents as a source of CH2 groups. Resins prepared from reaction mixtures with various 'equivalent' formaldehyde-to-urea molar ratios and various pH values and reactant concentrations were examined. Structural changes in the UF resins that accompany variations in these parameters, and the dependence of the UF resin structures on the solubilities of N,N'-dimethylolurea or various pretreated paraformaldehyde agents in water are discussed along with the relative rates of various reactions at different pH values. Comparisons are made among the UF resins prepared from formalin, N,N'-dimethylolurea or various pretreated paraformaldehyde agents as a source of CH2 groups in the resins. Valuable information on the mechanisms and reactivities of various reactions in the complicated UF resin system was drawn from these comparisons.

Детальніше...  

Poly((R)-3-hydroxyalkanoate)s (PHAs) are bacterial storage polyesters, currently receiving much attention because of their potential application as biodegradable and biocompatible plastics. Among them are the PHAs from Pseudomonas oleovorans, which are semicrystalline elastomers. Their applicability is seriously limited by their low melting temperature as well as by their low crystallization rate. Both problems were overcome by crosslinking of unsaturated pendent groups, which were incorporated in the polymer by tailoring the carbon source for biosynthesis. Crosslinking was established by electron-beam irradiation and resulted in a true rubber with constant properties over a large temperature range from -20 to + 170°C. Even after crosslinking, the material was still biodegradable. To our knowledge this is the first microbially produced biodegradable rubber

Детальніше...  

The poly(2-methoxycyanurate) of bisphenoi-F (PMCBF), is known for its thermal stability. PMCBF was separated into its various fractions by using a fractional precipitation method, and these fractions were then characterized by viscometry and light scattering methods. The unperturbed dimensions of the polymer chain were computed by using various two-parameter theories and compared with those obtained from calculations based on a freely rotating model. To characterize the flexibility of the polymer, various parameters, such as the stiffness parameter tr, the effective segment length Be, the characteristic ratio C~, and the dihedral angle ~, were determined.

Детальніше...  

Корисні статті

Комп'ютер для інженера

У сучасному світі комп'ютери дуже поширені. Складно уявити людину, не знайому з цим поняттям. Багато професій зобов'язані своїм виникненням саме комп'ютеру, вони б просто не з'явилися без створення електронно-обчислювальної техніки.

І хоча відносно недавно, на початку XX століття, комп'ютери були розкішшю і використовувалися лише для самих складних розрахунків, у наш час комп'ютери та комп'ютерна техніка дуже глибоко інтегрувалися у наше життя. Сучасне людство залежить від комп'ютерів, що викликає подиву, якщо розглянути, коли і в яких випадках вони використовуються.

Інженер-механік

Інженер-механік (від лат. Ingenium – талант, обдарованість, і mēchanicus – механік) – це технічний чи технологічний фахівець з вищою освітою, який застосовує отримані знання для конструювання, проектування, моделювання та експлуатації машин, апаратів та технічного обладнання в різних галузях сільського господарства та технічного виробництва. Першими з інженерів були саме механіки; вони розробляли і збирали різноманітні машини і механізми, в яких використовували принципи і закони механіки.

Інженер-машинобудівник

Ні для кого не секрет, що при сучасних умовах життя, темпах розвитку промисловості, безперервній автоматизації та оптимізації роботи механізмів та виробничих процесів, великою популярністю та попитом на ринку праці користується професія інженера, особливо інженера-машинобудівника.

Щоб відповісти на питання «Хто такий інженер-машинобудівник?», необхідно розуміти , що несе в собі кожне з цих слів окремо. Інженер – це людина, яка отримала освіту з визначеного фаху. Інженер – це творець техніки. Інженер – це особа, що професійно займається інженерією, тобто на основі поєднання прикладних наукових знань, математики та винахідництва знаходить нові рішення технічних проблем. Тобто, виходячи з цих загальновживаних визначень слова «інженер» зрозуміло, що цій професії може присвятити себе лише людина з неабиякими здібностями, які ґрунтуються на знанні точних наук, логічному мисленні, невичерпному терпінні і постійному бажанні вдосконалювати світ інженерії. Від латини ingenium — здатність, винахідливість, що є свідченням того, що інженером перш за все є людина-думаюча, яка знаходиться в безперервному пошуку відповідей на складні технічні завдання.

Рейтинг вищих навчальних закладів

На даний час в світі існує маса університетів з дуже великою кількістю кваліфікацій, спеціальностей та спеціалізацій. Одні з них більш престижні університети, інші менш.

Рейтинг вищих навчальних закладів переписується щорічно, в зв'язку з тим, що всі прагнуть стати краще в освіті, вдосконалитися в технологіях і підвищити свій рівень акредитації. Рейтинг навчальних закладів варіюється в залежності від предметної області, це природничі науки і математика, техніка/технологія і інформатика, життя і сільськогосподарська наука, клінічна медицина і фармація, соціальні науки.

Що таке КПІ?

На сьогоднішній день багатьох випускників, ще недавно – школярів, цікавить наступне питання – куди поступити, куди піти навчатися? В нашій країні є дуже багато ВНЗ, які пропонують свої послуги з підготовки і навчання студентів. Одним з таких ВНЗ є Київський політехнічний інститут (КПІ).