cpsm@kpi.ua
+38 044 204 8430
- Онлайн реєстрація
- Попередня реєстрація
- Публікації
- Методичні розробки
- Архів
- Онлайн допомога при вступі
- Подання заяви на вступ в електронній формі
- Журнал Polymer
- 1999 рік
- Reaction of crosslinked chloromethylated polystyrene with 4-hydroxybenzaldehyde under phase transfer-catalyzed conditions
- Polymer Communication Elongational flow birefringence of poly(methyl methacrylate)/ poly(vinylidene fluoride-co-hexafluoro acetone) blends
- Brillouin scattering and dielectric relaxation in PPG of different chain lengths and end groups
- Polymer Communication Novel approach for the synthesis of hydrophobe modified polyacrylamide. Direct N-alkylation of polyacrylamide in dimethyl sulfoxide
- Molecular orientation in crystalline miscible blends
- Polymer Communication The study of miscibility and phase behaviour of phenoxy blends using Raman spectroscopy
- Modulated differential scanning calorimetry: 14. Effect of molecular interactions on glass transition behaviour and increment of heat capacity in miscible polymer blends
- Polymer Communication Studies on the compatibility and specific interaction in cellulose acetate hydrogen phthalate (CAP) and poly methyl methacrylate (PMMA) blend
- Determination of Avrami exponent by differential scanning calorimetry for non-isothermal crystallization of polymers
- An n.m.r. investigation of the dynamical characteristics of water absorbed in Nafion
- Modulated-temperature differential scanning calorimetry: 15. Crosslinking in polyurethane–poly(ethyl methacrylate) interpenetrating polymer networks
- NMR measurements of self diffusion in polymer gel electrolytes
- Conductive polyaniline-SBS composites from in situ emulsion polymerization
- N.m.r. relaxation in Nafion—the low temperature regime
- Laser-addressing rewritable optical information storage of (liquid crystalline side chain copolymer/liquid crystals/photo-responsive molecule) ternary composite systems
- Influence of a metal–polymer interfacial interaction on dielectric relaxation properties of polyurethane
- Ternary blend with both molecularly and superamolecularly interpenetrating networks
- Polyaniline dispersions 8. The control of particle morphology
- Photoinduced alignment of polymer liquid crystals containing azobenzene moieties in the side chain. 4. Dynamic study of the alignment process
- Polymeric photoinitiators having benzoin methylether moieties connected to the main chain through the benzyl aromatic ring and their activity for ultraviolet-curable coatings
- Solid-state n.m.r. investigation of crosslinkable blends of novolac and poly(E-caprolactone)
- Analysis of spider silk in native and supercontracted states using Raman spectroscopy
- Stratification in thermoplastic olefins (TPO); photoacoustic FT-IR depth profiling studies
- Effect of UV crosslinking and physical aging on the gas permeability of thin glassy polyarylate films
- Synthesis of copolymers containing 3-hydroxycyclohexyl methacrylate and their application as ArF excimer laser resists
- Flow light scattering studies of polymer coil conformation in solutions under shear: effect of solvent quality
- Stereoregularity of poly(4-vinyl-n-alkyl-pyridinium) salts prepared by spontaneous polymerization
- Temperature gradient interaction chromatography of low molecular weight polystyrene
- Light scattering and reflectance of optically heterogeneous polymers in multiple scattering regime
- Composition effect on the core–shell morphology and mechanical properties of ternary polystyrene/styrene–butadiene rubber/polyethylene blends
- Compatibilization of poly(ethylene terephthalate)/polyamide-6 alloys: Mechanical, thermal and morphological characterization
- High temperature non-aqueous dispersion polymerisation of aromatic main chain liquid crystal polymers using organo-clay stabilisation
- Thermal scanning rheometer analysis of curing kinetic of an epoxy resin: 2. An amine as curing agent
- Evolution of a dispersed morphology from a co-continuous morphology in immiscible polymer blends
- Aromatic poly(ether-urethanes): effect of the polyol molecular weight on the photochemical behaviour
- Anion exchange membranes prepared by amination of cross-linked membranes having chloromethyl groups with 4-vinylpyridine and trimethylamine
- Tensile drawing of ethylene/vinyl-alcohol 3. Biaxial orientation copolymers: 3. Biaxial orientation
- A small angle scattering study of dendrimer–copper sulfide nanocomposites
- In situ formation of nanosized TiO2 domains within poly(amide–imide) by a sol–gel process
- The breaking strength of imperfect (real) polymer fibers
- Thermally crosslinkable thermoplastic PET-co-XTA copolyesters
- Non-uniform composition profiles in thin film polymeric nanofoams
- Poly(vinyl alcohol) and poly(vinylpyrrolidone) blends: 2. Study of relaxations by dynamic mechanical analysis
- The breaking strength of ultra-high molecular weight polyethylene fibers
- Mechanism of the thermal degradation of prepolymeric poly(3-nitratomethyl-3-methyloxetane)
- Crystalline polymer on silica. Geometrical selectivity for azobenzenes through highly-oriented structure
- The swelling and collapse of hydrogen bonded polymer gels
- Microstructural and mechanical characteristics of compatibilized polypropylene hybrid composites containing potassium titanate whisker and liquid crystalline copolyester
- Scanning force microscopic investigation of plasticity and damage mechanisms in polypropylene spherulites under simple shear
- X-ray studies on the smectic polymorphism of chiral polysiloxanes with a sulfide substituent
- Crystallization of poly(butylene terephthalate) blends containing liquid crystalline polymer component
- Molecular dynamics study of adsorption and spreading of a polymer chain onto a flat surface
- X-ray absorption spectroscopy studies of zinc-neutralized ethylene-methacrylic acid ionomers
- Morphological characterisation of the crystalline structure of cold-drawn HDPE used as a model material for the environmental stress cracking (ESC) phenomenon
- Enhancement of imidization of poly(amic acid) through forming poly(amic acid)/organoclay nanocomposites
- Orientation measurements from the surfaces of injection moulded plaques of thermotropic liquid crystalline polymer using normal incidence specular reflection
- Transcrystallization of polypropylene composites: nucleating ability of fibres
- Influence of the morphology and of the supermolecular structure on the enzymatic degradation of bacterial poly(3-hydroxybutyrate)
- Characterization of melt-mixed blends of poly(ether–ester) with various polyamides
- FTIR study of thermal cyclization processes in the synthesis of polyetherimidazopyrrolones
- Thermal graft copolymerization with concurrent lamination of low density polyethylene and poly(tetrafluoroethylene) films
- Interactions of drugs and spin probes with hydrophobically modified polyelectrolyte hydrogels based on N-isopropylacrylamide
- Epoxy resins based on the 1,2,3,4-tetrahydroquinoxaline and the 2,3,4,5-tetrahydro-1H-1,5-benzodiazepine ring systems
- Moisture diffusion in polyester–woodflour composites
- The effect of stoichiometry on the fracture toughness of a polyurethane-urea elastomer
- Semi-empirical calculations and dielectric spectrometry of molecular units in PEEK
- Synthesis of high-quality polypyrrole in a binary solvent system consisting of boron trifluoride-ethyl ether and additional ethyl ether
- Mechanism and kinetic modelling of PEEK pyrolysis by TG/MS
- Undirectional fibre-reinforced polymers: analytical morphology approach and mechanical modelling based on the percolation concept
- Thermal micro ATR/FT-IR spectroscopic system for quantitative study of the molecular structure of poly(N-isopropylacrylamide) in water
- Synthesis and characterization of copolymers of N-vinylcarbazole and N,N-dimethylaminoethyl acrylate
- Compositional heterogeneity in partially hydrolysed poly(vinyl alcohol) by reversed phase liquid chromatography
- Positronium-salt interactions and ionic conductivity in poly(2hydroxyethyl methacrylate) gel electrolytes
- Mechanical properties and structure of zone-drawn poly( p-phenylene vinylene) films
- Synthesis and characterisation of polyesters with nonlinear optical properties
- Surface structure of Kevlarw fiber studied by atomic force microscopy and inverse gas chromatography
- Morphology, melting behaviour and co-crystallization in polyethylene blends: the effect of cooling rate on two homogeneously mixed blends
- Influence of orientation and irradiation on stress relaxation of linear low-density polyethylene (LLDPE): a two-process model
- Investigations of some selected properties of electrochemically synthesized poly(N-ethyl aniline) films
- PCSP: a computer program to predict and analyze the packing in crystalline polymers
- Estimation of free volume in polystyrene-polyphenylene ether blend probed by the positron annihilation lifetime technique
- Exploration of the space charge behaviour of polyethylene using measurements of thermally stimulated discharge currents coupled with the determination of space charge distributions by the thermal step method in hydrogenated poly(vinyl chloride)
- Synthesis and thermoassociative properties in aqueous solution of graft copolymers containing poly(N-isopropylacrylamide) side chains
- Preparation of narrow-distribution polyvinylpyrrolidone by multi-stage high osmotic pressure chromatography
- In situ compatibilisation of poly(phenylene sulphide)/wholly aromatic thermotropic liquid crystalline polymer blends by reactive extrusion: morphology, thermal and mechanical properties
- Secondary dielectric relaxations in dried amorphous cellulose and dextran
- Microstructural analysis of p-acryloyloxy-acetanilide and N,N-dimethylacrylamide copolymers of biomedical interest by NMR
- Effects of crystallinity and stress state on the yield strain of polyethylene
- Compatibilization of PBT/ABS blends by methyl methacrylate-glycidyl methacrylate-ethyl acrylate terpolymers
- Windowing polarization: considerations for the study of the space charge relaxation in poly(methyl methacrylate) by thermally stimulated depolarization currents
- Polymer Communication Characterization of poly(2-propenoyl chloride) by nuclear magnetic resonance spectroscopy
- Solid state structure and melting behavior of interdiffused polyethylenes in microlayers
- ELSEVIER Cellulose fibre-supported pH-sensitive hydrogels
- Miscibility and specific interactions in two polyelectrolyte/ poly(2-ethyl-2-oxazoline) blend systems
- Polymer Communication Nitration of polyethersulfone by ammonium nitrate and trifluoroacetic anhydride
- Surface pattern in thin poly(styrene–maleic anhydride) films
- End-functionalised copolymers prepared by the addition-fragmentation chain transfer method Styrene/methyl methacrylate system
- Comparing dielectric measurements on poly(ethylene terephthalate) at constant heating rates with isothermal measurements
- Polymer Communication Phase structure in polypropylene/PA6/SEBS blends
- Processing and microstructural characterization of porous biocompatible protein polymer thin films
- Study of the molecular structure of PET films obtained by an inverse stretching process. Part 2: crystalline reorganization during longitudinal drawing
- Effects of precursor origins on water sorption behaviors of various aromatic polyimides in thin films
- Polymer Communication Physical ageing in poly(ethylene terephthalate)—its influence on cold crystallisation
- Interpretation of the chain structures of PMMAs, PANs and PAAms obtained by using Ce(IV) and KMnO4 in combination with NTA and DTPA as initiator systems by FTIR spectroscopic analysis
- Effect of counter ions in electrochemical polymerization media on the structure and responses of the product polyaniline films 111.Structure and properties of polyaniline films prepared via electrochemical polymerization
- Interaction energies for blends of SAN with methyl methacrylate copolymers with ethyl acrylate and n-butyl acrylate
- Dianhydride architectural effects on the relaxation behaviors and thermal and optical properties of organo-soluble aromatic polyimide films
- Some performance characteristics of plasma surface modified carbon black in the (SBR) matrix
- Synthesis, characterization and surface analysis using dynamic contact angle measurements of graft copolymers: poly(methy1 methacrylate)-g-poly(dimethylsiloxane) and poly(methy1 methacrylate)-g-poly(trifluoropropylmethylsiloxane)
- Nylon 6 as a modifier for maleated ethylene–propylene elastomers
- Copolymers of sodium styrenesulphonate with n-butylvinylether and n-octadecylvinylether prepared by micellar copolymerization
- Polymer Communication Poly(t-butyl-3a-(5-norbornene-2-carbonyloxy)-7a,12a-dihydroxy-5bcholan-24-oate-co-maleic anhydride) for a 193-nm photoresist
- Synthesis of soluble polyimides containing bipyridinium dihydrogen phosphate and p-toluenesulfonate and effect of anions on properties of polyimides
- Preparation and properties of injection-moulded blends of poly(vinyl chloride) and liquid crystal copolyester
- Morphology of crystalline Nylon-610 membranes prepared by the immersion-precipitation process: competition between crystallization and liquid–liquid phase separation
- Polymer Communication Course of conducting poly(1,6-heptadiyne) formation through ultraviolet–visible spectroscopy
- Time-resolved SAXS study of crystallization of poly(ethylene oxide)/poly(methyl methacrylate) blends
- Kinetic study of the thermal and oxidative degradations of poly(arylenether)s containing quinoline units
- Dielectric on-line spectroscopy during extrusion of polymer blends
- Electron beam induced structural modification of a fluorocarbon elastomer in the presence of polyfunctional monomers
- Dilute solution behaviour of hexamethylene diisocyanate-based carboxylated polyurethanes and related ionomers in tetrahydrofuran
- Modelling a polyelectrolyte system in water to estimate the ion-conductivity
- On morphological instability in polymeric crystallization
- Effect of the functional group inhomogeneity of an in situ reactive compatibilizer on the morphology and rheological properties of immiscible polymer blends
- Microstructure and mechanical properties of hot-air drawn poly(ethylene-2,6-naphthalate) fibers
- 1,2-Bis(carboxyphenoxy)arylenes and aramids and polyarylates therefrom: synthesis and properties
- Isotactic polypropylene/ethylene-co-propylene blends: effects of the copolymer microstructure and content on rheology, morphology and properties of injection moulded samples
- Change of phase behaviour of SMA/PMMA blends during processing at high deformation rates
- (1999)487-495 Crystallization kinetics of polypropylene Part 4: Effect of unmodified and azide-modified PET and PA short fibres
- Unsaturated modified poly(vinyl alcohol). Crosslinking through double bonds
- Photopolymerization of acrylates using N-aliphaticmaleimides as photoinitiators
- In situ fibrillation of poly(viny1 alcohol) during saponification of poly(viny1 ester) (I). Chemorheological and morphological investigations of in situ fibrillation
- The development of organized structures in polyethylene crystallized from a sheared melt, analyzed by WAXS and TEM
- Polylactic acids produced from l- and dl-lactic acid anhydrosulfite: stereochemical aspects
- Combined in-situ small and wide-angle synchrotron X-ray scattering (S AXS - WAXS) applied to a solid-state polymerization reaction
- Absolute prediction of upper and lower critical solution temperatures in polymer/solvent systems based on corresponding state theory
- Post-deposition ageing reactions differ markedly between plasma polymers deposited from siloxane and silazane monomers
- variation as a function of composition for blends of PVDF and a polyaniline derivative
- Molecular modeling of the poling of piezoelectric polyimides
- High energy ion irradiation effects on polymer materials–Changes in mechanical properties of PE, PSF and PES
- Polymer Communication Characterization of photochemically converted poly(paru-phenylene vinylene)
- Diffusion of toluene and n-heptane in polyethylenes of different crystallinity
- The storage stability of melamine formaldehyde resin solutions: III. Storage at elevated temperatures
- Polymer Communication Factors affecting the preparation of permanently end-grafted polystyrene layers
- Melting and crystallization of poly(ethylene-co-octene) measured by modulated d.s.c. and temperature-resolved X-ray diffraction
- Positron annihilation behavior in poly(ethylene)
- Polymer Communication Properties of the complex salt obtained by doping the poly(N-vinylcarbazole) with bromine
- Phase behaviour and borderline miscibility in blends of syndiotactic polystyrene with poly(vinyl methyl ether)
- Crystallization of isotactic polypropylene/natural terpene resins blends
- Polymer Communication Structural investigation of the phase transformation in the plastic zone of a P-phase isotactic polypropylene by synchrotron radiation microdiffraction
- Relaxation in partially cured samples of an epoxy resin and of the same resin modified with a carboxyl-terminated rubber
- Solvent effects on the miscibility of poly(methyl methacrylate)/poly(vinyl acetate) blends I: Using differential scanning calorimetry and viscometry techniques
- (I 999) 55 I-558 Photosensitive polyimide-precursor based on polyisoimide: dimensionally stable polyimide with a low dielectric constant
- A TEM study on polyoxymethylene edge-on lamellae crystallized epitaxially on alkali halides
- Molecular dynamics simulations of the enthalpy of mixing of poly(vinyl chloride) and aliphatic polyester blends
- Morphology and elastomeric properties of isotactic polypropylene/ hydrogenated poly( styrene-co-butadiene) blends: a potential for a new thermoplastic elastomer
- Liquid–liquid phase separation and its effect on crystallization in the extruded polypropylene/ethylene–propylene–rubber blend
- The effect of seeding on the crystallisation of poly(hydroxybutyrate), and co-poly(hydroxybutyrate-co-valerate)
- EUEVIER 40(1999)565-568 Notes on the formulation of concentration fluctuation in moderately concentrated polymer solutions
- Waxy polyethylenes from solution thermolysis of high density polyethylene: inert and H-donor solvent dilution effect
- Preparation and characterization of poly(urethane–imide) films prepared from reactive polyimide and polyurethane prepolymer
- 7Li static and MAS n.m.r. studies on blends of polyamide-6 sulfonated polystyrene ionomers and lithium
- Polymer Communication Enzymatic degradation of poly(e-caprolactone)/poly(dl-lactide) blends in phosphate buffer solution
- Synthesis of water-soluble statistical copolymers and terpolymers containing pendent oligo(ethylene glycol derivatives)
- Properties of thermoplastic polyurethane elastomers containing liquid crystalline chain extender (I) synthesis and properties of hard segments
- Polymer Communication Synthesis, characterization and nonlinear optical properties of copolymers of benzylaminofullerene with methyl methacrylate or ethyl methacrylate
- Reduction of carbonyl groups in aromatic polyketones: synthesis and characterization of methylene-bridged polyaryl-ethers and -thioethers
- Copolymerization of phenylacetylene and 1-hexyne using Ziegler-Natta and metathesis catalyst systems: copolymer compositions and reactivity ratios by ‘H n.m.r. spectroscopy
- Polymer Communication Rheological properties of particle suspensions in a polymeric liquid
- The t -effective paradox revisited: an extended analysis of Kovacs’ volume recovery data on poly(vinyl acetate) q
- Dynamic mechanical relaxation of lightly cross-linked epoxidized natural rubber
- DC electrical conductivity of poly[4-amino-2,6pyrimidinodithiocarbamate] and its metal complexes
- Polymer Communication Grafted polymer tail/loop mixtures differing in chain length
- Chain-conformation and chain-folding in ‘PK99’ : evidence from singlecrystal X-ray studies of linear and cyclic oligomers
- Spectroscopic analysis of transition-metal coordination complexes based on poly(4-vinylpyridine) and dichlorotricarbonylruthenium(II)
- Polymer Communication Poly(2-trimethylsilyl-2-propyl methacrylate-co- g -butyrolactone-2-yl methacrylate) for ArF lithography
- Free-rotation dimensions of some polyurethane chains
- Influence of particle dispersion on the matrix ligament thickness of polymer blends 2. A generalized equation and particle spatial distributions for different morphologies
- Polymer Communication New transamidation reaction in molten state: model study
- Aromatic 1,3,4-oxadiazoles as thermal stabilizers for rigid poly(viny1 chloride)
- Processing of (in)tractable polymers using reactive solvents Part 5: morphology control during phase separation
- Polymer Communication Stability of co-continuous polystyrene/poly(ether–ester) blends in shear flow
- Local chain configuration dependence of the mechanisms of analogous reactions of poly(viny1 chloride) 4. Nucleophilic substitution with sodium thiobenzoate
- Relationship between surface and bulk morphologies for immiscible polymer blends
- Polymer Communication Mobility and relaxation of amorphous chains in drawn polypropylene: 2 H-NMR study
- Miscibility and crystallization of thermosetting polymer blends of unsaturated polyester resin and poly(E-caprolactone)
- 13 C solid-state n.m.r. study of styrene-crosslinked mixed polyesters
- Polymer Communication Small particle size in emulsion polymerization using non-ionic stabilisers
- Reactive blending of polysulfone with polyamide: a potential for solventfree preparation of the block copolymer
- Mechanical properties of gas-assisted injection moulded PS, PP and Nylon parts
- Polymer Communication Ring opening metathesis polymerization of 2,3-diazanorborn-5-ene derivatives
- Flower shaped microgel 3: synthesis of poly(2-hydroxyethylmethacrylate) core-polystyrene shell type microgels
- Peroxide crosslinking of isotactic and syndiotactic polypropylene
- Development of bicontinuous morphologies in polysulfone–epoxy blends
- Branching in epoxy resins-analytical aspects
- Determination of average molecular weight between cross-links (M c ) from swelling behaviours of diprotic acid-containing hydrogels
- Membranes with a particulate morphology prepared by a dry–wet casting process
- Obtaining the y phase in isotactic polypropylene: effect of catalyst system and crystallization conditions
- Swelling-induced structure changes of polyelectrolyte gels
- Electron donor-induced improvement of the microstructure of polypropene-block-poly(ethene-co-propene) synthesized by a modified stopped-flow polymerization method and correlation with its crystalline morphology
- Medium strain hysteresis loss of natural rubber and styrene-butadiene rubber vulcanizates: a predictive model
- Gas induced damage in poly(vinylidene fluoride) exposed to decompression
- Morphology and coarsening behavior in Polycarbonate/Nylon6-co-12 blends with and without compatibilizer
- Monte-Carlo simulation of polymers in shear flow
- Composite of aramid fibre (poly-m-phenylene isophthalamide)thermoplastic elastomers (SEBS): enhancement of tensile properties by maleated-SEBS compatibiliser
- Degradation of interpenetrating polymer networks based on PE and polymethacrylates by electron beam irradiation
- Influence of a reactive terpolymer on the properties of in situ composites based on polyamides and thermotropic liquid crystalline polyesters
- Electron microprobe analysis as a novel technique to study the interface between thermoset and thermoplastic polymers
- Effects of crosslinking on polyaniline films’ doping behavior and degradation under weathering
- The kinetics of transesterification in blends of liquid crystalline copolyester and polycarbonate
- Fluorescence study on intermolecular complex formation between mesogenic biphenyl moieties of main-chain thermotropic liquid–crystalline polyesters with 7–18 methylene units
- Electron-beam curing of thick thermoset composite matrices
- The tacticity of the backbone chain of poly(macromonomer)s of o-methacryloyloxyethyl polystyrene macromonomers prepared by radical chain polymerization
- Blends of side-chain liquid crystalline polymers: towards self-assembled interpenetrating networks
- Investigation on the swelling behaviour in poly(dimethylsiloxane) rubber networks using nmr and compression measurements
- Free radical polymerization initiated via photoinduced intermolecular electron transfer process: kinetic study 3
- Temperature and time dependence of orthopositronium formation in polystyrene
- Mechanisms of PVDF membrane formation by immersion-precipitation in soft (1-octanol) and harsh (water) nonsolvents
- Synthesis and properties of phosphorus-containing PBN copolyesters PEN and
- Studies on polyimides: Part 3. Interactions between hexamethylenetetramine and models for polyimides and novolacs
- Multiple melting behaviour of poly(ethylene-co-butylene naphthalene-2,6-dicarboxylate)s
- Synthesis of a well-defined anthracene-labelled polystyrene by atomtransfer radical polymerization
- Pervaporation properties of ethynyl-containing copolyimide membranes to aromatic/non-aromatic hydrocarbon mixtures
- Mechanical behaviour above Tg of a plasticised PVC reinforced with cellulose whiskers; a SANS structural study
- Ruthenium-catalysed copolymerization of 4-benzoylpyridine or benzophenone and 1,3-divinyltetramethyldisiloxane Competition between formation of cyclic co-monomers and linear copolymers
- UV polymerization of triphenylaminemethylacrylate thin film on ITO substrate
- Dynamic mechanical analysis of injection-moulded discs of polypropylene and untreated and silane-treated talc-filled polypropylene composites
- The synthesis of oligomers related to nylon 4 6 and nylon 6 6
- Synthesis and characterization of an amine-functional SAN for the compatibilization of PC/ABS blends
- Glass transition studies in physically aged partially crystalline poly(ethylene terephthalate) by TSC
- Polymer Communication A comparative study of insoluble and soluble polyimide thin films
- Poly(styrene-b-isobutylene-b-styrene) block copolymers produced by living cationic polymerization I. Compositional analysis
- Side-chain liquid crystalline elastomers: the relationship between the orientational ordering of the polymer backbone and the length of the coupling chain
- Polymer Communication Synthesis of poly(ether ether ketone) with high content of sodium sulfonate groups and its membrane characteristics
- Aliphatic polyester-grafted starch-like polysaccharides by ring-opening polymerization
- Crystallizations of poly(ethylene terephthalate co ethylene isophthalate)
- Polymer Communication A d.s.c. study of crystallization behaviour of poly(a-n-alkyl ,8-L-aspartate)s
- Polymerization of acrylamide in solution and inverse emulsion: number molecular weight distribution with chain transfer agent
- II. Dielectric investigation of cold crystallization of poly(3hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate)
- Polymer Communication Polymerization of acrylamide in the presence of peroxodisulfate and ultrasound
- Wholly aromatic polyamides and polyimides prepared from 3,3-di(4-aminophenyl)-5,5-di(4-biphenylyl)-p-terphenyl and 3,3-di(4-aminophenyl)-5,5,6,6-tetraphenyl-p-terphenyl
- Quantitative analysis of crystallization and skin formation during isothermal solvent removal from semicrystalline polymers
- Polymer Communication Novel polymer systems with very bulky organosilicon side chain substituents
- Structural hierarchy developed in co-injection molded polystyrene/ polypropylene parts
- The mass transport in poly(ethylene terephthalate) and related induced-crystallization
- Hydroboration/amination of EPDM with dicyclopentadiene as diene monomer
- Cross-linking reaction of poly(4-vinylpyridine) cylindrical microdomains of poly(a-methylstyrene)-block-poly(4-vinylpyridine) films and characterization of soluble ribbon-like nanopolymers
- Thermally initiated cure kinetic of bismaleimides containing poly(dimethylsiloxane)
- Structure and property studies of poly(ethylene terephthalate)/ poly(ethylene-2,6-naphthalate) melt-blended fibres
- Interpenetrating polymer networks of 2-hydroxyethyl methacrylate terminated polyurethanes and polyurethanes
- Crystal and molecular structure of poly(thioether-ketone) from single crystal oligomer data and diffraction-modelling: 1. Polymer crystallised by orientation
- Preparation and microphase-separated structures of (AB) n star–block copolymers composed of symmetric diblock arms
- The rigid amorphous fraction of isotactic polystyrene prepared by freeze-drying from dilute solutions
- A new synthetic route for the preparation of alkenyl functionalized aryl cyanate ester monomers
- Preparation and characterization of colourless alternate poly(amide-imide)s based on trimellitic anhydride and m-phenylenediamine
- Physical properties of poly(ester-urethanes) prepared from different molar mass polycaprolactone-diols
- The synthesis of a hydrocarbon-soluble organolithium anionic initiator. A gas–liquid chromatography study of the efficiency of the reaction of s-butyllithium with p-divinylbenzene
- The potential of a new rigid-rod polymer fibre (‘M5’) in advanced composite structures
- Synthesis and properties of new polyimides derived from 1,1-bis[4-(4aminophenoxy)phenyl]cyclododecane
- Polymer Communication Synthesis of fluorine-containing block copolymers via ATRP 2. Synthesis and characterization of semifluorinated di- and triblock copolymers q
- Application of cluster model for the description of epoxy polymer structure and properties
- Brittle–ductile transition in polypropylene filled with glass beads
- Polymer Communication Depression of glass transition temperature due to the chain extension in glassy state
- Characterization of the curing behaviour of cyanic ester by a positronannihilation lifetime technique
- Relationship between the structure of the bridging group and curing of liquid crystalline epoxy resins
- Polymer Communication Soluble graft-like complexes based on poly(4-vinyl pyridine) and carboxy-terminated polystyrene oligomers due to hydrogen bonding
- Application of Monte Carlo methods for modelling of polymerization reactions
- Characterization and fluorescence properties of thiophene-modified pi-conjugated nickel poly-yne polymers
- Polymer Communication HETCOR NMR study of poly(rac-lactide) and poly(meso-lactide)
- Reactive surfactants in heterophase polymerisation XXIII. Synthesis and characterisation of novel dialkyl maleate cationic surfmers1
- Inclusion compounds formed between cyclodextrins and nylon 6
- Polymer Communication Theoretical investigation of block copolymerization of tetrahydrofuran and pyrrole
- Polymer Communication Determination of triad sequence distribution of copolymers of maleic anhydride and its derivates with donor monomers by 13C n.m.r. spectroscopy
- Nitrogen/oxygen permeability of natural rubber, epoxidised natural rubber and natural rubber/epoxidised natural rubber blends
- Morphology development during phase inversion of a PS/PE blend in isothermal, steady shear flow
- Polymer Communication Acid diffusion control in chemically amplified resists
- Synthesis and characterization of polyfunctional star-shaped macromonomers
- A study of the interaction of acrylic acid/1,7-octadiene plasma deposits with water and other solvents
- Effects of morphology on the yield stress of polyethylene
- Polymer Communication Poly(pyridine-2,5-diyl) as electron-transport/hole blocking layer in poly(phenylene vinylene) light-emitting diode
- Influence of the comonomer content on the thermal and dynamic mechanical properties of metallocene ethylene/1-octene copolymers
- Co-continuous morphologies in polymer blends: the influence of the interfacial tension
- Polymer Communication Direct synthesis of aromatic polycarbonate from polymerization of bisphenol A with CO using a Pd–Cu catalyst system
- An elastomeric conductor based on polyaniline prepared by mechanical mixing
- Influence of morphology and chemical structure on the inverse response of polypropylene to gamma radiation under vacuum
- Polymer Communication Studies of cyclic and linear poly(dimethylsiloxanes): 34 Preparation, fractionation and characterisation of the first per-deuterated macrocyclic poly(dimethylsiloxanes)
- Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy
- Morphological investigations of polyethylene fibre reinforced polyethylene
- Polymer Communication Polymerization of acrylamide in aqueous medium initiated by a redox system of 4-carboxybenzophenone and sulfur-containing amino acids
- Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature
- Global conformations of chiral polyisocyanates in dilute solution
- Polymer Communication Radical copolymerization reactivity of maleate-terminated poly(ethylene glycol) with vinylbenzyl-terminated polystyrene macromonomers
- Fluorine-19 NMR monitored thermal imidization of bicyclo[2.2.2]oct-7-ene systems
- Molecular deformation processes in aromatic high modulus polymer fibres
- Polymer Communication Crystallographic structures on the sequential copolymer of 1 -caprolactam and pyrrolidinone (nylon 4/6)
- Thermal stabilization of polyacrylonitrile fibres
- Mixture design approaches to IPDI–H 6XDI–XDI ternary diisocyanatebased waterborne polyurethanes
- Polymer Communication Electroinitiated polymerization of maleic anhydride with 1,4-dimethylpyridiniumiodide — kinetics of polymerization
- Polymer blends of poly(e -caprolactone) and poly(vinyl methyl ether) – thermal properties and morphology
- Electroactive polymer–SiO 2 nanocomposites for metal uptake
- Molecular dimensions in the d and g phases of syndiotactic polystyrene, using small angle neutron scattering
- Effect of draw ratio and temperature on the strain-induced crystallization of poly (ethylene terephthalate) at fast draw rates
- Dielectric investigation of some oxyviscoses
- Porous poly(l-lactide) films obtained by immersion precipitation process: morphology, phase separation and culture of VERO cells
- Gas permeation properties of radiation grafted and sulfonated poly-(vinylidene fluoride) membranes
- Polyurethane/HDPE blends: 2. Compatibilization with an olefinic ionomer
- Monitoring changes in the viscoelastic properties of thin polymer films by the quartz crystal resonator
- Hydrophilic polyurethaneurea membranes: influence of soft block composition on the water vapor permeation rates
- The effect of external stimuli on the equilibrium swelling properties of poly(N-vinyl 2-pyrrolidone/itaconic acid) poly-electrolyte hydrogels
- Aggregation behavior of gel microspheres of it-poly(methyl methacrylate) from xylene solution
- High-temperature infrared kinetics of transition-metal-catalyzed chemical reactions in solid state complexes of polybutadienes with palladium chloride
- Yielding and plastic behaviour of amorphous atactic poly(oxypropylene) under uniaxial compression: an atomistic modeling approach
- High-resolution solid-state 13C n.m.r. study on phase structure of the compositionally fractionated bacterial copolyester poly(3-hydroxybutyric acid-co-3-hydroxypropionic acid)s
- Preparation of thermoset rubbery epoxy particles as novel toughening modifiers for glassy epoxy resins
- Studies on miscibility in polycarbonate/poly(styrene-co-acrylonitrile) blends by ellipsometry
- Structural analysis of core-shell type polymer particles composed of poly(butyl acrylate) and poly(methyl methacrylate) by high-resolution solid-state 13C n.m.r. spectroscopy
- Coalescence in PC/SAN blends: effect of reactive compatibilization and matrix phase viscosity
- Effects of thermal treatments on the viscoelastic behavior of the interphase relaxation in a compatibilized thermoset/thermoplastic blend
- Poly(methacrylic acid)–copper ion interactions Phase diagrams: light and X-ray scattering
- Solvent induced crystallization behavior of poly(ethylene 2,6-naphthalate) film
- Polyrotaxanes and pseudopolyrotaxanes of polyamides and cucurbituril1
- Crystallite modulus of double-stranded helices of isotactic poly(methyl methacrylate): the X-ray measurement and the theoretical calculation
- Study on surface structure of amorphous polymer blends on the basis of lateral force microscopy
- Biodegradable and biocompatible inorganic–organic hybrid materials: 4. Effect of acid content and water content on the incorporation of aliphatic polyesters into silica by the sol-gel process
- Fracture behavior of PBT–ABS blends compatibilized by methyl methacrylate–glycidyl methacrylate–ethyl acrylate terpolymers
- Relationship between stress and orientation induced structures during uniaxial drawing of poly(ethylene 2,6-naphthalate)
- Miscibility enhancement of modified polystyrene blends with a liquid crystalline polymer
- Effects of bromine substitution on the physical and gas transport properties of five series of glassy polymers
- Conformational analysis of the 13/4 to 4/1 helical transition in poly(a -isobutyl b -L-aspartate)
- On the viscoelastic and plastic behaviour of methylmethacrylate-co-N-methylglutarimide copolymers
- Mechanisms of solute and drug transport in relaxing, swellable, hydrophilic glassy polymers
- Comparison of gas transport and sorption in the ladder polymer BBL and some semi-ladder polymers
- Inverse gas chromatographic study of some polyethers
- Syndiotactic polystyrene/thermoplastic polyurethane blends using poly(styrene-b-4-vinylpyridine) diblock copolymer as a compatibilizer
- Synthesis and properties of phosphorus containing copoly(bismaleimide)
- 2 H n.m.r. study of a deformed poly(dimethylsiloxane) rubber network below and above the crystallization temperature
- Compositional control of electrochromic properties in copolymers of N-vinylcarbazole and N-phenyl-2-(5'-vinyl-2'-thienyl)-5-(''-thienyl)-pyrrole
- Synthesis of reactive diluents for cationic cycloaliphatic epoxide UV coatings
- Characteristics of water in polypyrrole films
- Pyroelectric properties and dielectric hysteresis of a poly(vinyl alcohol) with azobenzene-alkoxy side chains
- Emulsion polymerization of lauryl methacrylate and its copolymerization with trimethylolpropane trimethacrylate
- Spectroscopic characterization of molecular interdiffusion at a poly(vinyl pyrrolidone)/vinyl ester interface
- Tensile and compressive deformation of polypyridobisimidazole (PIPD)based ‘M5’ rigid-rod polymer fibres
- Chemical bonding analysis of electron-sensitive polymers by EELS
- Properties and morphology of polyamide 6 hybrid composites containing potassium titanate whisker and liquid crystalline copolyester
- Effect of water absorption in polymers at low and high temperatures
- Gelation behaviour during chainwise crosslinking polymerisation of methacrylate resins
- Formation and stability of co-continuous blends with a poly(ether-ester) block copolymer around its order–disorder temperature
- Model linear ethylene–butene copolymers irradiated with g-rays
- A shear induced transition of lamellar alignment in a concentrated diblock copolymer solution
- Polymerization of hydroxyalkyl methacrylates characterized by combination of FT-Raman and step-scan FT-i.r. photoacoustic spectroscopy
- Kinetic analysis of an asymmetrical DSC peak in the curing of an unsaturated polyester resin catalysed with MEKP and cobalt octoate
- Gas separation properties of pendent phenyl substituted aromatic polyamides containing sulfone and hexafluoroisopropylidene groups
- Microstructure–conductivity relationship in conducting polypyrrole/epoxy composites
- Unexpected thermal conversion of hydroxy-containing polyimides to polybenzoxazoles
- Polymer Communication Water soluble polyaniline and its blend films prepared by aqueous solution casting
- New method to determine the true transmissibilities and permeabilities of oxygen in hydrogel membranes
- Temperature dependence of crystal structure of uniaxially-oriented polyethylene analysed by an X-ray imaging plate system
- Polymer Communication The inclusion of b cyclodextrin provides a supramolecular solution to the problem of polymerization of dodecyl and octadecyl methacrylates in aqueous emulsion
- D.s.c studies of states of water, hydrazine and hydrazine hydrate in ethylcellulose membrane1
- Inverse gas chromatographic characterization of poly(ethylene oxide)
- Polymer Communication A completely miscible ternary blend system of poly(3-hydroxybutyrate), poly(ethylene oxide) and polyepichlorohydrin
- Finite chain-length effects in rubber elasticity
- Acetone sorption and uptake kinetic in poly(ethylene terephthalate)
- Interactions between the nonionic surfactant and polyacrylamide studied by light scattering and viscometry
- Collapse of poly(methacryloylethyl trimethylammonium methylsulfate) on addition of acetone into an aqueous solution
- Dynamic process of recrystallization of poly(ethylene terephthalate) solids revealed by fluorescence spectroscopy
- Morphology of poly(chloro-p-xylylene) CVD thin films
- Relaxational study of poly(ethylene-2,6-naphthalene dicarboxylate) by t.s.d.c., d.e.a. and d.m.a.
- A new approach to the characterization of molecular orientation in uniaxially and biaxially oriented samples of poly(ethylene terephthalate)
- Shearing of particles during crack growth in polymer blends
- Mechanical properties of weakly segregated block copolymers: 1. Synergism on tensile properties of poly(styrene-b-n-butylmethacrylate) diblock copolymers
- Time-resolved X-ray studies of structure development in poly(butylene terephthalate) during isothermal crystallization
- Modulated differential scanning calorimetry: 12. Interphase boundaries and fractal scattering in interpenetrating polymer networks
- Effect of casting solvents on physical properties of hydrogenated styrene–butadiene copolymer
- PVC containing hydroxyl groups I. Synthesis, characterization, properties and crosslinking
- Cobalt(II) chloride catalysed oxidative degradation of poly(ethylene oxide) by a short wavelength UV-radiation
- Ageing and yielding in model epoxy thermosets
- PVC containing hydroxyl groups II. Characterization and properties of crosslinked polymers
- On immiscibility-loop phase behaviour of polymer blends
- A study on the heat of fusion of b-polypropylene
- Effect of the surfactant blend composition on the properties of polymerizing acrylamide-based inverse-emulsions: characterization by small-angle neutron scattering and quasi-elastic light scattering
- Reactive compatibilisation of heterogeneous ethylene propylene rubber (EPM)/nylon 6 blends by the addition of compatibiliser precursor EPM-g-MA
- Crystallization kinetics of poly(ether ether ketone) (PEEK) from its metastable melt
- Chloro-telechelic poly(ethylene oxide)s as initiators for the atom transfer radical polymerization (ATRP) of styrene and methyl methacrylate Structural features that affect the initiation efficiency
- The application of non-Gaussian chain statistics to ultralow density polyethylenes and other thermoplastic elastomers
- X-ray pole figures for oriented PVC
- Molecular weight distribution of graft copolymers prepared from macromonomers
- Calorimetric and dielectric study of a blend containing a conductive polymer: poly(3-octylthiophene) 1 poly(ethylene-co-vinylacetate)
- Hard-sphere-chain equations of state for lyotropic polymer liquid crystals
- Synthesis of cross-linked poly(aldehyde guluronate) hydrogels
- Poly(ethylene oxide)/lithium triflate phase diagram
- Studies on polyimides: 2. Formation of high molecular weight poly(N-(hydroxyphenyl) maleimides)
- Polymer Communication Polymer interface instability caused by a grafting reaction
- Transesterification in poly(ethylene terephthalate) and poly(ethylene naphthalene 2, 6-dicarboxylate) blends; the influence of hydroxyl end groups
- Lubrication and slip flow during extrusion of plasticized PVC compounds in the presence of lead stabilizer
- Polymer Communication Formation of six-membered cyclic anhydrides by thermally induced intramolecular ester condensation in Eudragit E film
- Orientation induced chromism in poly(methylhexysilane)
- Effects of molecular structure and composition on rheological behaviour of (methylmethacrylate N-phenylmaleimide) copolymers
- Polymer Communication Indications of micro-vitrification during chainwise cross-linking polymerisation
- Vapor–liquid equilibria for binary solutions of polyisobutylene in C6 through C9 n-alkanes
- Poly(amidoamine) hyperbranched systems: synthesis, structure and characterization
- Polymer Communication Shear-induced layer alignment in the smectic phase of a side chain liquid crystal polymer
- Kinetics of phenolic resol resin formation by HPLC. III: Zinc acetate
- On the particulate structure of cellulose solutions
- Polymer Communication Poly(ether imide)s: correlation of positron annihilation lifetime studies with polymer structure and gas permeability
- Amphiphile micelles formed by polystyrene/poly(2-vinyl pyridine) heteroarm star copolymers in toluene
- Phase structure and toughness of silicone-modified epoxy resin with added silicone graft copolymer
- Polymer Communication Coordinating properties of polymers with N-substituted diamides of malonic acid towards Cu(II); EPR studies
- Shear rheology and thermal properties of linear and branched poly(ethylene terephthalate) blends
- An ab initio study of the structural and physical properties of a novel rigid-rod polymer: PIPD
- Effect of PBT melt viscosity on the morphology and mechanical properties of compatibilized and uncompatibilized blends with ABS
- Atomic force microscopy imaging of single polymer spherulites during crystallization: application to a semi-crystalline blend
- The effect of polymer structure on specific interactions between dye solutes and polymers
- Quantitative determination of unsaturation in photocured halogenated acrylates and methacrylates by FT-IR and Raman-spectroscopy and by thermal analysis
- Miscible binary blends of poly(ethylene oxide) and poly(ether sulphone). Part 1: crystallization kinetics, morphology and thermal behavior
- The influence of creep conditions on the macromolecular structure of an epoxy-imide
- On deformation mechanisms of b-polypropylene 3. Lamella structures after necking and cold drawing
- Phase behaviour and structure formation in the system syndiotactic polystyrene/cyclohexanol
- Polymer Communication Synthesis of fluorine-containing block copolymers via ATRP 1. Synthesis and characterization of PSt-PVDF-PSt triblock copolymers
- Strain recovery mechanism of PBT/rubber thermoplastic elastomer
- Structural effects of a novel polymeric emulsifier – SSIPM modified tetracarboxylic acid terminated polyester on the emulsion polymerization of butyl methacrylate
- Polymer Communication Compatibilizing effect of a filler in binary polymer mixtures
- Effect of crosslinking reactions and order of mixing on properties of compatibilized PBT/ABS blends
- Structure and liquid crystallinity of the comb-like complexes made of poly(ethylene imine) and some aliphatic carboxylic acids
- Dynamic light scattering during shear: measurements of diffusion coefficients
- Yield and plastic resistance of a-crystals of isotactic polypropylene
- Alloys of polyimides with varying degree of crosslinking through antimony salts: mechanical properties characterization
- Reactive surfactants in heterophase polymerization. XXIV. Emulsion polymerization of styrene with maleate- and succinate-containing cationic surfactants
- Water expandable polystyrene (WEPS) Part 1. Strategy and procedures
- Polymer Communication Correlations between the crystalline long c-parameter and the number of carbon atoms of pure n-alkanes
- Novel antimicrobial N-halamine polymer coatings generated by emulsion polymerization
- Water expandable polystyrene (WEPS) Part 2. In-situ synthesis of (block)copolymer surfactants
- Polymer Communication Thermal and physical properties of poly(phenylene oxide) blends with glass fiber reinforced syndiotactic polystyrene
- Microspectroscopic evaluations of the interfacial degradation by absorbed water in a model composite of an aramid fibre and unsaturated polyester
- Water expandable polystyrene (WEPS) Part 3. Expansion behaviour
- Polymer Communication The influence of vinylidenefluoride on the free volume of poly(chlorotrifluoroethylene)
- Electronic energy transfer in compatible blends of poly(di-n-hexylsilane) and poly(methyl-n-propylsilane)
- Compatibility and degradation of blends of poly(caprolactone)– poly(ethylene glycol) block copolymer and polypropylene
- Polymer Communication Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties
- Variation in oxidation state of titanium species on MgCl 2-supported Ziegler catalyst and its correlation with kinetic behavior for propylene polymerization
- A constitutive model in viscoelastoplasticity of glassy polymers
- Polymer Communication Non-destructive imaging of delicate polymer surfaces using scanning force microscopy tips modified with hydrophobic self-assembled monolayers
- Initiation mechanisms for radical polymerization of styrene and methyl methacrylate with highly substituted peroxypivalate initiators
- Physical aging in poly(methyl methacrylate) glass: densification via density fluctuation
- Polymer Communication Syndiospecific copolymerization of styrene with styrene macromonomer bearing terminal styryl group by CpTiCl3 –methylaluminoxane catalyst
- Photoinitiated polymerization of a dimethacrylate oligomer: 2. Kinetic studies
- Evaluation of the ‘‘effective volume shift’’ method for axial dispersion corrections in multi-detector size exclusion chromatography
- In situ FT-IR spectroscopic investigation on the microstructure of hyperbranched aliphatic polyesters
- Novel perfluorononenyloxy group-containing polyimides
- The crystallization behavior of blends of thermotropic liquid crystalline polymers
- Chromatic transition of p-conjugated polydiacetylene and the subsequent aggregation phenomena
- Cold extrusion and in situ formation of self-blends of UHMWPE Part 1. Processability and thermal characterization
- Shrinkage behaviour of uniaxially drawn poly(ethylene 2,6-naphthalate) films
- Morphology and mechanical properties of compatibilized nylon 6/polyethylene blends
- Steady-state process and time-dependent effects in non-isothermal crystallization of poly(vinylidene fluoride)
- Kinetics of styrene miniemulsion polymerization stabilized by nonionic surfactant/alkyl methacrylate
- Effects of graphite content on the morphology and barrier properties of poly(vinylidene fluoride) composites
- Orientation of a longitudinal polymer liquid crystal in a constant magnetic field
- The wall effect on viscosity measurement of dilute aqueous solutions of polyethylene glycol and polyvinyl alcohol using a paraffin-coated capillary viscometer
- Polypropylene–rubber blends: 2. The effect of the rubber content on the deformation and impact behaviour
- Mathematical modeling of a co-extrusion process for preparing gradient-index polymer optical fibers
- Solid-state 13C-NMR analyses of the structure and chain conformation of thermotropic liquid crystalline polyether crystallized from the melt through the liquid crystalline state
- Polypropylene–rubber blends: 3. The effect of the test speed on the fracture behaviour
- Spinodal decomposition and succeeding crystallization in PCL/SAN blends
- Crosslinking of microbial copolyesters with pendant epoxide groups by diamine
- Polypropylene–rubber blends: 4. The effect of the rubber particle size on the fracture behaviour at low and high test speed
- Effect of the shear flow on the phase behaviour of polystyrene/poly(vinyl methyl ether) blend
- Synthesis and characterization of novel heteroannular benzoylferrocene polysiloxane monomers, oligomers, and polymers
- Polypropylene–rubber blends: 5. Deformation mechanism during fracture
- Relationship between sequence distribution and transesterification of PEN/PET random/block copolyesters
- Phase structure and miscibility in blend of poly(4-methyl styrene) with poly(cyclohexyl methacrylate)
- A scaling model for the prediction of micellization of diblocks in polymer melts
- Temperature dependence of dynamic yield stress in amorphous polymers as indicator for the dynamic glass transition at negative pressure
- Polyimides from 3,3 0 -dioxo-[1,1 0 ]-spirodiphthalan-5,5 0 ,6,6 0 tetracarboxylic dianhydride 1
- Design of polypropylene oxide/polybutadiene bi-soft segment urethane/ urea polymer for pervaporation membranes
- The effect of zinc stearate on melt-processable ionomeric blends based on zinc salts of maleated high-density polyethylene and maleated EPDM rubber
- The structural organization in syndiotactic polystyrene film induced by toluene vapour sorption
- An investigation into the behaviour of SPBT and SPBT/PC blends
- Dynamic properties in aluminum filled PMMA
- Fluorescence study on intermolecular complex formation between mesogenic terphenyldiimide moieties of a thermotropic liquid-crystalline polyimide
- The stress and sonic modulus versus strain curve of polymer fibres with yield
- Miscibility and tensile properties of poly (b-hydroxybutyrate)–cellulose propionate blends
- High-pressure DSC study of thermal transitions of a poly(ethylene terephthalate)/carbon dioxide system
- Miscibility, phase behavior, and Curie transition in blends of vinylidene fluoride/trifluoroethylene copolymer and Poly(1,4-butylene adipate)
- Local chain configuration dependence of the mechanisms of analogous reactions of PVC-5. Novel results on substitution reaction with sodium 2-mercaptobenzothiazolate
- Synthesis and investigation of photoinduced anisotropy of a series of liquid crystalline copolymers with azo groups
- Rheological, extractive and thermal studies of the room temperature vulcanized polydimethylsiloxane
- Dielectric relaxation behaviour of fluorinated aromatic poly(ether)s and poly(ether ketone)s
- Synthesis and characterization of liquid crystalline multiblock copolyesters of oxybenzoate and ethylene terephthalate
- Synthesis and characterization of poly(ethylene glycol)/poly(l-lactic acid) alternating multiblock copolymers
- Effect of peel rate and temperature on delamination toughness of PC–SAN microlayers
- Annealing effect on the ferroelectric phase transition behavior and domain structure of vinylidene fluoride (VDF)–trifluoroethylene copolymers: a comparison between uniaxially oriented VDF 73 and 65% copolymers
- Synthesis and characterization of novel polyimide-based NLO materials from poly(hydroxy-imide)s containing alicyclic units (II)
- Effect and mechanism in compatibilization of poly(styrene-b-2-ethyl-2-oxazoline) diblock copolymer in poly(2,6-dimethyl-1,4-phenylene oxide)/poly(ethylene-ran-acrylic acid) blends
- Structure–properties relationship for resols with different formaldehyde/ phenol molar ratio
- Synthesis of silver nanoparticles and their self-organization behavior in epoxy resin
- Effect of hydrogenation on dynamic mechanical relaxation: 2. Syndiotactic polystyrene
- Polymer Communication Impedance spectroscopy of highly cross-linked epoxy resin/bisphenol A-based polycarbonate
- Free-radical crosslinking copolymerization of styrene and divinylbenzene: real time monitoring of the gel effect using fluorescence probe
- Effect of rubber functionality on microstructures and fracture toughness of impact-modified nylon 6,6/polypropylene blends: 1. Structure–property relationships
- Polymer Communication The synthesis and characterization of soluble poly(isothianaphthene) derivative: poly(5,6-dihexoxyisothianaphthene)
- Synthesis and antimicrobial activity of polymeric guanidine and biguanidine salts
- Polymer swelling: 22. Molecular structure–affinity correlation studies that involve poly(styrene-co-divinylbenzene) exposed to saturated hydrocarbons
- Polymer Communication Synthesis of block copolymers by transformation of photosensitized cationic polymerization to stable free radical polymerization
- Polymer Communication Conformational changes during the crystallization of poly(di-n-hexylsilane)
- Synthesis of telechelic vinyl polymers by a two-component iniferter
- Polymer Communication Molecular mobility in liquid-crystalline phase of oriented wholly aromatic copolyester as revealed by proton magnetic resonance
- Polymer Communication The transport of nitric oxide through various polymeric matrices
- Synthesis and properties of regioregular polyethers and polyesters with (h 4-cyclobutadiene)cobalt moieties in the main chain1
- FTIR-Raman spectroscopy of polydiacetylenes with chiral pendent groups
- Precipitation polymerization of acrylic acid in toluene. I: synthesis, characterization and kinetics
- Synthesis of a cellulose thiosulfate and its immobilization on gold surfaces
- Stress relaxation of polypropylene fibres with various morphologies
- Precipitation polymerization of acrylic acid in toluene. II: mechanism and kinetic modeling
- Structure and properties of rodlike poly(p-phenylene pyromellitimide)s containing short side groups
- Compatibilization of immiscible polymer blends (PV/PVDF) by the addition of a third polymer (PMMA): analysis of phase morphology and mechanical properties
- A phenomenological study of the hot-tool welding of thermoplastics. Part 1: Polycarbonate
- Polymer Communication Modeling the dynamic performance of poly(tetrafluoro ethylene) in the a-transition region
- A morphological study of a highly structurally regular isotactic poly(propylene) fraction
- Morphology, deformation and failure behaviour of homo- and copolyimide fibres q 1. Fibres from 4,4 0 -oxybis(phthalic anhydride) (DPhO) and p-phenylenediamine (PPh) or/and 2,5-bis(4-aminophenyl)-pyrimidine (2,5PRM)
- Polymer Communications Synthesis of poly(2-trimethylsilyl-2-propyl methacrylate) and their application as a dry-developable chemically amplified photoresist
- Pulsed field gradient n.m.r. diffusion measurements on electrolyte solutions containing LiCF3SO3
- Evolution of polymer blend morphology during compounding in an internal mixer
- Polymer Communication Preparation and characterization of hydrogenated syndiotactic polystyrene
- Effect of adding an imidized acrylic polymer to super tough nylon 6 on stiffness and toughness
- A solid state NMR study of polycarbonate oligomer grafted onto the surface of amorphous silica
- Role of an active environment of use in an environmental stress crack resistance (ESCR) test in stretched polyethylene: A vibrational spectroscopy and a SEM study
- Photosensitized charge separation using ruthenium(II) complex and viologen-containing polymers — effects of quaternization and length of alkyl side-chain
- Drying methods affecting the particle sizes, phase transition, deswelling/ reswelling processes and morphology of poly(N-isopropylacrylamide) microgel beads
- X-ray scattering study of a poly(methacrylic acid) sample as a function of its neutralization degree
- The effect of DMPA units on ionic conductivity of PEG–DMPA–IPDI waterborne polyurethane as single-ion electrolytes
- Photoinitiated polymerization of a dimethacrylate oligomer Part 3. Postpolymerization study
- Morphology and thermal properties of pseudo interpenetrating polymer networks based on natural rubber (Manihot glaziovii) and poly(methyl methacrylate)
- Studies on polymer-metal interfaces Part 1. Comparison of adsorption behavior between oxygen and nitrogen functionality in model copolymers onto metal surfaces
- Effect of a functional triblock elastomer on morphology in polyamide 6/polycarbonate blend
- Morphology, phase continuity and mechanical behaviour of polyamide 6/chitosan blends
- Equilibrium ring concentrations and the statistical conformations of polymer chains Part 15. Large cyclics in liquid sulfur
- High density polyethylene as a thermal storage material studied by MAS 13 C NMR spectroscopy
- Solid state n.m.r. study of polymer networks based on methyl methacrylate and diethylene-glycol–bis-allyl-carbonate
- The effect of specific interactions on dye transport in polymers above the glass transition
- Blends of bitumen with polyethylenes
- Use of block copolymers to control the morphologies and properties of thermoplastic/thermoset blends
- Poly(ethylene glycol)-induced DNA condensation in aqueous/methanol containing low-molecular-weight electrolyte solutions Part I. Theoretical considerations
- Hydrogenation of polystyrene-b-polybutadiene-b-polystyrene block copolymers using a metallocene/n-butyllithium catalyst – the role of n-butyllithium
- Differential scanning calorimetry of phenol–formaldehyde resins cure-accelerated by carbonates
- Poly(ethylene glycol)-induced DNA condensation in aqueous/methanol containing low-molecular-weight electrolyte solutions Part II. Comparison between experiment and theory
- Relationship of relaxation property to reverse osmosis permeability in aromatic polyamide thin-film-composite membranes
- Temperature effects in hydrodynamic properties of comb-like polymer with laterally attached mesogenic units
- Conductive IPN based on polypyrrole and silicon crosslinked styrene–isoprene–styrene triblock copolymer
- Viscoelastic properties of hydrophobically modified alkali-soluble emulsion in salt solutions
- Time-resolved study of electro-optic property in itaconate copolymer bearing an aminonitrostilbene chromophore
- Synthesis and properties of new soluble poly(amide-imide)s from 3,3 0 ,5,5 0 -tetramethyl-2,2-bis[4-(4-trimellitimidophenoxy)phenyl]propane with various diamines
- Studies on the reactive polysulfone–polyamide interface: interfacial thickness and adhesion
- Crystallization and melting behavior of polypropylene and maleated polypropylene blends
- Polymerization of N-[4-(azidocarbonyl)phenyl]maleimide and N-[4-(N 0 -phenoxycarbonylamino)phenyl]maleimide polymers containing aromatic isocyanate precursors
- Dispersion of normal modes in 1,4-trans-poly(1,3-pentadiene)
- A novel fabrication of poly(ε-caprolactone) microspheres from blends of poly(ε-caprolactone) and poly(ethylene glycol)s
- Effect of acid structure on deprotection of poly(2-trimethylsilyl-2-propyl methacrylate)
- a , b and g relaxations of functionalized HD polyethylene: a TSDC and a mechanical study
- Effect of long chain branching on rheological properties of metallocene polyethylene
- Productive and nonproductive substrate binding in enzyme mimics
- All sol–gel organic–inorganic nonlinear optical materials based on melamines and an alkoxysilane dye
- Study of high permeability polymers by means of the spin probe technique
- Living polymerization of substituted acetylenes by MoOCl4 –n-Bu4Sn– EtOH in anisole which features high initiator efficiency
- Complex formation between poly(sodium phosphate) and poly(4-vinylpyridinium chloride) in aqueous solution
- Modified acrylic-based superabsorbent polymers (dependence on particle size and salinity)
- Molecular aggregation behavior of polyvinyl chloride solutions
- Kevlar reinforcement of polyolefin-based thermoplastic elastomer
- Possible coupling reactions of functional silanes and polypropylene
- Surface modification of poly(tetrafluoroethylene) by plasma pretreatment and adsorption of polyelectrolytes
- Rheological investigation on the anisotropic phase of cellulose–MMNO/H2O solution system
- Extrusion freeforming of Nylon 6 materials
- An oxygen index evaluation of flammability on modified epoxy/polyester systems
- Miscible binary blends of poly(ethylene oxide) and an amorphous aromatic polyamide (Aramide 34I): crystallization, melting behavior and semi-crystalline morphology
- Blends of new, all-aromatic liquid-crystalline polymers and poly(ethylene terephthalate)
- Elastic constants in dilute poly(styrene)/nematic liquid crystal solutions – effects of concentration and molecular weight
- In vitro study of poly(lactic acid) pin degradation
- Mechanical properties and hydrolytic stability of polyesterurethane elastomers with alkyl side groups
- Comparison between conventional emulsion and miniemulsion polymerization of vinyl acetate in a continuous stirred tank reactor
- Crystallization of oriented amorphous poly(ethylene terephthalate) as revealed by X-ray diffraction and microhardness
- The effect of solvents on the contraction and mechanical properties of spider silk
- Phase separation in free-radical crosslinking copolymerization: formation of heterogeneous polymer networks
- The interrelation between the kinetics of the IPN formation at the interface with solid and surface segregation
- The influence of sorption of small molecules on the yield stress of glassy polymers
- Polymer Communication DSC studies on bound water in silk fibroin/S-carboxymethyl kerateine blend films
- Modification of maleic anhydride grafted polyethylene with 1,4-diaminobutane in near critical propane
- Molecular characterization of the polymerization of acetylene-functional benzoxazine resins
- Polymer Communication Viscoelastic characterization of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) 1
- Production of super selective polysulfone hollow fiber membranes for gas separation
- Synthesis of poly[(styrene)-rotaxa-(crown ether)]s via free radical polymerization
- Polymer Communication Thermodynamic analysis for the interaction of polyacrylate with wax in heptane
- Anchoring characteristics and interfacial interactions in a polymer dispersed liquid crystal: a molecular dynamics study
- Characterization of the PMMA- and PEO-, di- and triblock copolymers, by light scattering, SEC and vapour pressure osmometry
- Polymer Communication The influence of activation on the solution state of cellulose dissolved in N-methylmorpholine-N-oxide-monohydrate
- Biosynthetic stereocopolymer of 3-methylmalic acid as hydrolyzable and biocompatible polyester for temporary therapeutic applications
- The cationic ring-opening polymerization of 7-tetradecene oxide with methyl trifluoromethansulfonate. An investigation of the mechanism and the kinetics by means of 1H, 13C and 19F NMR
- Polymer Communication Effect of elongation on electric resistance of carbon–polymer systems [I]
- Hard segmented side chain liquid crystal polyurethanes with azobenzene mesogenic moieties
- Characterization of polysiloxane-block-polyimides with silicate group in the polysiloxane segments
- Polymer Communication Biaxial stress of precursor polymers using holographic interferometry
- The double ring-opening polymerization of sulfur containing spiro orthocarbonates
- Multiple active sites model of ethylene polymerization with the Cp 2ZrCl 2 –aluminoxanes catalytic system
- Polymer Communication Controlled radical polymerization of methacrylates at ambient temperature and the synthesis of block copolymers containing methacrylates
- Conformational mobility in a polymer with mesogenic side groups Dielectric and DSC studies
- Polymer-supported syntheses of some cyclic oligoamides and some cyclic alternating oligo(amide±ester)s
- Polymer Communication The viscosity–molecular weight relationships for diolic perfluoropolyethers
- Synthesis and characterization of epoxy film cured with reactive polyimide
- Local intramolecular mobility in linear polyesters simulating the structure of thermotropic polymers
- X-ray scattering studies of orientation in channel flows of a lyotropic liquid crystalline polymer
- Synthesis and thermal characterization of polybenzoxazines based on acetylene-functional monomers
- A melt-processable semicrystalline polyimide structural adhesive based on 1,3-bis(4-aminophenoxy) benzene and 3,3’,4,4’-biphenyltetracarboxylic dianhydride
- Photophysical properties and photoinduced polymerisation activity of novel 1-chloro-4-oxy/acyloxythioxanthone initiators
- Synthesis and characterization of 4-[(per/polyfluoro)phenyloxy]-4 0 vinylbiphenyls and their polymers
- Polymer Communication Radiation dose effects in chlorinated polyvinyl chloride
- The role of metastability in the micromorphologic features of sheared isotactic polypropylene melts
- Studies on microgels q 4. The effect of solvent on the synthesis of t-butylstyrene-divinylbenzene microgels by anionic polymerization
- Polymer Communication Time scales for three processes in the interdiffusion across interfaces
- Small angle neutron scattering investigation of transesterification in Poly(ethylene terephthalate)-poly(Butylene terephthalate) mixtures
- Synthesis, modification, and characterization of hyperbranched poly(ether ketones)
- Birefringence in strong flows of polymer solutions
- Water absorption in a rubber-modified epoxy resin; carboxy terminated butadiene acrylonitrile-amine cured epoxy resin system
- Polymer Communication Synthesis of 3-alkylated-1-vinyl-2-pyrrolidones and preliminary kinetic studies of their photopolymerizations
- The influence of elastomer concentration on toughness in dispersions containing preformed acrylic elastomeric particles in an epoxy matrix
- The interface between immiscible polymers studied by low-energy forward recoil spectrometry and neutron reflectivity
- Polymer Communication Preparation of new main-chain type poly(anthraquinone)s having alkoxyl groups and their liquid crystalline behaviour
- Application of the Kwei equation to the glass transition of dye solute–polymer blends
- Small molecule penetrant diffusion in aromatic polyesters: a molecular dynamics simulation study
- Polymer Communication Structural properties of selected poly(azomethines)
- Fluorescing wholly aromatic polyesters containing diphenylanthracene fluorophores
- Effect of compatibilization and ABS type on properties of PBT/ABS blends
- Polymer Communication Radical as well as anionic polymerisation mechanisms in the synthesis of poly(p-arylene vinylene) precursors
- An electron spin resonance study of molecular dynamics and heterogeneity in the styrene–acrylonitrile copolymers
- Solution properties of polyphosphazenes containing 2,2 0-dioxybiphenyl groups
- Polymer Communication The effect of water absorption on the physical ageing of amorphous poly(ethylene terephthalate) film
- A novel laser light-scattering study of enzymatic biodegradation of poly(e-caprolactone) nanoparticles
- Isothermal crystallization of nylon 6/liquid crystal copolyester blends
- Phase morphology development in immiscible PP/(PS/PPE) blends influence of the melt-viscosity ratio and blend composition
- Blends of polycaprolactone with polyvinylalcohol: a DSC, optical microscopy and solid state NMR study
- On the unperturbed dimensions of perfluoropoly-(oxymethylene-co-oxyethylene)-acetals
- Tensile moduli of co-continuous polymer blends
- Phase behaviors of solid polymer electrolytes: applicability of an extended Debye–Hückel theory
- Highly soluble polyimides from sterically hindered diamines
- Morphology development in immiscible polymer blends: initial blend morphology and phase dimensions
- Effect of acrylonitrile content on the delamination toughness of PC/SAN microlayers
- Nanoporous organic/inorganic hybrid materials produced from poly(dimethyl siloxane)
- Co-continuous morphologies in polymer blends with SEBS block copolymers
- Blends of rigid and flexible macromolecules: poly(benzimidazole) mixed with poly(vinyl acetate-stat-vinyl alcohol) copolymers
- Thermoreversible swelling behaviour of hydrogels based on N-isopropylacrylamide with sodium acrylate and sodium methacrylate
- Emulsion polymerizations in the presence of b-cyclodextrin
- Conformational transition of polystyrene chain near the critical point of N,N-dimethylformamide/cyclohexane mixed solvent system
- Strong interaction at interface of carbon fiber reinforced aromatic semicrystalline thermoplastics
- Novel diblock copolymers containing bidentate phosphine and phosphine oxide ligands
- Surface modification of halogenated polymers 3. Influence of additives such as alkali cations or nucleophiles on the magnesium reductive treatment of polytetrafluoroethylene
- Change in free volume during volume phase transition of poly(Nisopropylacrylamide) gel as studied by positron annihilation lifetimes: temperature dependence
- The sub-Tg relaxations in pure and antiplasticized model epoxy networks as studied by high resolution creep rate spectroscopy
- Tensile drawing of ethylene/vinyl-alcohol copolymers: 4. Influence of iodine treatment
- Rheological behaviour of thermoplastic elastomers from polypropylene/ acrylonitrile–butadiene rubber blends: effect of blend ratio, reactive compatibilization and dynamic vulcanization
- Stereocomplex formation between enantiomeric poly(lactic acid)s. XI. Mechanical properties and morphology of solution-cast films
- End group modification in poly(ethylene terephthalate)
- The fine structure of metallocene-based linear polyethylenes: Part 1. A model grounded on molecular mobility
- Lipase-catalyzed formation of end-functionalized poly(e -caprolactone) by initiation and termination reactions
- Effects of temperature on diblock copolymer micelle composed of poly(g-benzyl L-glutamate) and poly(N-isopropylacrylamide)
- Synthesis and characterization of carbon-13 labelled 2-ethylidene-5norbornene containing EPDM rubber. Observation of crosslinking and oxidation
- Investigations of the thermodegradation of ethylene– a -olefin copolymers by pyrolysis-gas chromatography (Py-GC)
- Bisimide-lactamimide ring contraction in six-membered polyimides
- Structural effects of phenols on the thermal and thermo-oxidative degradation of polybenzoxazines
- Finite strain behavior of poly(ethylene terephthalate) above the glass transition temperature
- Polyurethane and unsaturated polyester hybrid networks: 2. Influence of hard domains on mechanical properties
- Synthesis and structural study of poly(thioether-imide-sulfones) based on 3,3 0 - and 4,4 0-bis(4-chloro-1,8-naphthalimido)diphenylsulfone
- Multi-oriented and fibrous liquid crystalline networks based on linear mesogenic polymers
- Mechanical properties of polystyrene-block-polybutadiene-blockpolystyrene triblock copolymers crosslinked in the disordered state
- Synthesis and properties of phosphorus containing polyarylates derived from 2-(6-oxido-6H-dibenz {c,e}{1,2} oxaphosphorin-6-yl)-1,4-dihydroxy phenylene
- Phase behaviors of hyperbranched polymer solutions
- Influence of glass bead fillers on phase transitions of syndiotactic polypropene
- Modelling amorphous lithium salt–PEO polymer electrolytes: ab initio calculations of lithium ion–tetra-, penta- and hexaglyme complexes
- Conformational transition of nanoparticles composed of poly(g-benzyl l-glutamate) as the core and poly(ethylene oxide) as the shell
- Conversion of growth and recrystallisation of b-phase in doped iPP
- Preparation and properties of hybrids of organo-soluble polyimide and montmorillonite with various chemical surface modification methods
- Processing, performance and biodegradability of a thermoplastic aliphatic polyester/starch system
- On deformation mechanisms of b-polypropylene 2. Changes of lamellar structure caused by tensile load
- Polymer Communication High electric field effect on hopping conduction in molecularly doped polymer systems
- The rheological properties of polystyrene/poly(vinylmethylether) blend near the critical region and in the homogenous region
- Crystal structure of the clathrate d form of syndiotactic polystyrene containing 1,2-dichloroethane
- Polymer Communication Surface modification strategies for multicomponent polymer systems,VI:acid–base interactions as a strategy for interfacial modification in immiscible polymer blends
- Reactive blending of polysulfone with polyamide: a difference in interfacial behavior between in situ formed block and graft copolymers
- Copolymerization behaviour of pentadiene-functional macromonomers obtained by free radical addition-fragmentation
- Polymer Communication Crystal forms in cold-crystallized syndiotactic polystyrene
- Monitoring phase separation and reaction advancement in situ in thermoplastic/epoxy blends
- Mixtures of numerous different n-alkanes: 1. Structural studies by X-ray diffraction at room temperature—Correlation between the crystallographic long c parameter and the average composition of multi-alkane phases
- Polymer Communication Flow-induced birefringence of linear and long chain-branched metallocene polyethylene melts subject to steady start-up flow
- Solid structure and biodegradation of the compositionally fractionated poly(3-hydroxybutyric acid-co-3-hydroxypropionic acid)s
- Mixtures of numerous different n-alkanes: 2. Studies by X-ray diffraction and differential thermal analyses with increasing temperature
- Morphology and properties of compatibilized ternary blends (nylon 6/a thermotropic liquid crystalline polymer/a functionalized polypropylene) processed under different conditions
- Miscibility of poly(vinylidene fluoride) and poly(methyl methacrylate-co-zinc polyacrylate) ionomers
- Carbon-13 solid-state n.m.r. study of 13 C-enriched human hair keratin
- Friction induced mechanochemical and mechanophysical changes in high performance semicrystalline polymer
- Chain conformation and intermolecular interaction of partially neutralized poly(acrylic acid) in dilute aqueous solutions
- Polymerization of liquid-crystalline monomers having a Schiff-base structure
- Dependence of chemical composition of styrene/butyl acrylate copolymers on temperature and molecular weight
- Synthesis and solution properties of a betaine-sulfur dioxide polyampholyte
- Characterization of chemical structure and morphology of eroding polyanhydride copolymers by liquid-state and solid-state 1 H n.m.r.
- Structural and kinetic transitions in P(VDF–TrFE)/PMMA blends
- Characterization of UHMWPE sol–gel transition by parallel plate rheometer and pulsed NMR
- Polymer Communication Electrorheological characteristics of semiconducting poly(aniline-co-oethoxyaniline) suspension
- Structure and polymorphic behavior of poly(dipropylphosphazene)
- Synthesis of fluorinated poly(phenylquinoxaline-amide)s and study of thin films made therefrom
- Polymer Communication Controlled radical polymerization of methyl methacrylate in the presence of CuX/phen complexes and alkyl halides
- Structure development during flow of ternary blends of a polyamide (nylon 66), a thermotropic liquid crystalline polymer (poly(ester amide)) and a functionalized polypropylene
- Polymer Communication Miscibility of biodegradable synthetic aliphatic polyester and poly(epichlorohydrin) blends
- Polymer Communication On the use of energy-filtering transmission electron microscopy for analysis of unstained multiphase polymer systems
- FT-i.r. study of thermal cyclization processes in synthesis of polyesterimidazopyrrolones
- Polymer Communication Synthesis, characterization of 2-(methacryloyloxy)ethyl-(di-) l-lactate and their application in dextran-based hydrogels
- Polymer Communication Co-continuous morphologies in polymer blends:stability
- Direct synthesis of novel acidic and zwitterionic block copolymers via TEMPO-mediated living free-radical polymerization
- Polymer Communication Controlled polymerization of vinyl chloride with tert-butyllithium
- Inverse dispersion polymerisation of acrylic acid initiated by a water-soluble redox pair: the role of drop mixing
- Synthesis of EPDM-g-PMMA through atom transfer radical polymerization
- Polymer Communication Structure of odd–even nylons derived from 2-methylpentamethylenediamine. Effect of the side methyl group
- Prediction of EVAL membrane morphologies using the phase diagram of water–DMSO–EVAL at different temperatures
- Polymer Communication A new approach to self-assembly of polymer blends in solution
- Contribution of amylose and amylopectin to the light scattering behaviour of starches in aqueous solution
- Photocrosslinked polymers based on pendant extended chalcone as photoreactive moieties
- Polymer Communication Universal drag reduction characteristics of polyisobutylene in a rotating disk apparatus
- Free radical copolymerization of methyl methacrylate with methacrylic monomers derived from salicylic acid. Microstructural analysis, chain flexibility and hydration behaviour of the prepared copolymers
- Decrease in electrical conductivity upon oxygen exposure in polyanilines doped with HCl
- Solid-solution formation and phase segregation in binary systems of homologous extended-chain perfluorinated alkanes
- Solvent effects on true terminal reactivity ratios for styrene—methyl methacrylate copolymerization system
- Molecular rearrangements in ultra high molecular weight polyethylene after irradiation and long-term storage in air
- Isothermal thickening and thinning processes in low molecular weight poly(ethylene oxide) fractions crystallized from the melt 6. Configurational defects in molecules
- Copolymerization of tetraethoxysilane and dimethyl(diethoxy)silane studied by 29Si NMR and ab initio calculations of 29Si NMR chemical shifts
- Composition dependence of phase instability and cloud point in solutionblended mixtures of polystyrene with poly(cyclohexyl methacrylate)
- Development of a new poly(phenylquinoxaline) for adhesive and composite applications
- Cyclopolymerization XXVI. Repeating unit structure of cyclopolymers derived from N-substituted-N-allyl-2-(methoxycarbonyl)allylamines and mechanism of intramolecular cyclization
- Compatibilization of blends of polystyrene and zinc salt of sulfonated polystyrene by poly(styrene-b-4-vinylpyridine) diblock copolymer
- Cationic ring-opening polymerization of benzoxazines
- Surface modification of poly(tetrafluoroethylene) films by double graft copolymerization for adhesion improvement with evaporated copper
- Dendritic hyperbranched polymers as tougheners for epoxy resins
- Diamine architecture effects on glass transitions, relaxation processes and other material properties in organo-soluble aromatic polyimide films
- Morphology-interface-toughness relationship in polyamide/polysulfone blends by reactive processing
- Glass transition behaviours in aromatic poly(amic dialkyl ester) precursors with various chain rigidities
- Beaded nanofibers formed during electrospinning
- Study of poly(methyl methacrylate) relaxations by thermally stimulated depolarization currents and the thermal step method
- Dielectric study of dynamics of subchains and distribution of normal mode relaxation times in dilute and semidilute solutions of miscible block copolymers
- Rheology of highly swollen chitosan/polyacrylate hydrogels
- Lower critical solution temperatures of N-substituted acrylamide copolymers in aqueous solutions
- Frustration and single crystal morphology poly(2-vinylpyridine) of isotactic
- Effect of applied stress on the alkaline hydrolysis of geotextile poly(ethylene terephthalate). Part 1: room temperature
- Network structure of bimodal epoxies—a small angle X-ray scattering study
- A mechanistic model of case II diffusion of a diluent into a glassy polymer
- Dielectric study of the main-chain liquid-crystal polyesters poly(alky1 terephthaloyl-bis-4-oxybenzoate)s and poly(alkyl-4,4’-diphenoxy terephthalate)
- Formation of anisotropic membranes via thermally induced phase separation
- The nature of secondary crystallization in poly(ethylene terephthalate)
- Observation of immobile regions in natural rubber at ambient temperature by solid-state 13C CP/MAS NMR spectroscopy
- Size exclusion chromatography of polymers with molar mass detection. Computer simulation study on instrumental broadening biases and proposed correction method
- Thermal and mechanical properties of poly(l-lactic acid)–poly (ethyleneco-vinyl acetate) blends
- Temperature dependence of the elastic modulus of the crystalline regions of poly(p-phenylene benzobisthiazole)
- Denaturation experiments on calf-thymus DNA/polycation complexes in aqueous/organic solvent mixtures
- Synthesis and blue light-emitting characteristic of rod-like poly(4,4’-biphenylene pyromellitimide) with fury1 side groups
- Conformational study of substituted p-phenylene terephthalates with molecular mechanics and Metropolis Monte Carlo methods
- Molecular structure and orientation in processed polymers 1. Analysis of X-ray scattering data
- Influence of acetic acid concentration on the solubilization of chitosan
- A novel second-order nonlinear optical guest-host polymeric material exhibiting optical transparency down to 400 nm
- Interdiffusion in blends of deuterated polystyrene and poly(a-methylstyrene)
- Molecular structure and orientation in processed polymers 2. Application to aromatic polyester fibers
- Conformation of stereoregular PMMA in solutions during the temperature induced conformational transition
- Reactive blending by in situ polymerization of the dispersed phase
- Toughness mechanism in semi-crystalline polymer blends: I. High-density polyethylene toughened with rubbers
- The molecular conformations of polytetrafluoroethylene: forms II and IV
- The reactivity of initiator radicals V. The application of the revised patterns scheme
- Using a water-insoluble dye to probe the particle nucleation loci in styrene emulsion polymerization
- Toughness mechanism in semi-crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles
- Modeling of helix reversal defects in polytetrafluoroethylene I. Force field development and molecular mechanics calculations
- Free radical grafting of maleic anhydride in vapour phase on polypropylene film q
- Charge-recombination luminescence as a monitor of network formation during cure of epoxy resins
- The morphology and orientation of polyethylene in films of sub-micron thickness crystallized in contact with calcite and rubber substrates
- Modeling of helix reversal defects in polytetrafluoroethylene II. Molecular dynamics simulations 1
- Self-assembly of polyaniline/polyacrylic acid films via acid–base reaction induced deposition
- Analysis of the dynamic structure factor for semi-dilute solutions of polyisobutylene
- Parameters affecting the determination of transport kinetics data in highly swelling polymers above Tg
- The effect of solid wall interaction on an amorphous polyethylene thin film, using a Monte Carlo simulation on a high coordination lattice
- Comparison of the associating behaviour between neutral and anionic alkylperfluorinated pullulan derivatives
- Formation and structure of the epoxy-silica aybrids
- Formation of particulate microporous poly(vinylidene fluoride) membranes by isothermal immersion precipitation from the 1-octanol/ dimethylformamide/poly(vinylidene fluoride) system
- Some block copolymers illustrating the effects of siloxane and silane units on the properties of terephthalate–glycol thermoplastics
- Effect of compatibilizing compounds on the viscoelastic properties of interpenetrating polymer networks
- The length of cooperativity at the glass transition in poly(viny1 acetate) from the modeling of the structural relaxation process
- Thermodynamic interactions and characterisation of poly(isobornyl methacrylate) by inverse gas chromatography at various temperatures
- Proton spin–spin relaxation and n.m.r. imaging of peroxide/coagent crosslinked cis-1,4-polyisoprene
- Fracture characterization of PC/ABS blends: effect of reactive compatibilization, ABS type and rubber concentration
- Liquid crystalline thermosets by polymerization of mesogenic azomethine based diepoxides-influence of reaction rate on phase behaviour
- Facile synthesis of epoxystyrene and its copolymerisations with styrene by living free radical and atom transfer radical strategies
- Polymer Communication Heterogeneous morphology of Nephila edulis spider silk and its significance for mechanical properties
- Molecular characterization of a ,b -poly(asparthylhydrazide) a new synthetic polymer for biomedical applications
- Plasticity of polystyrene-poly(2,6,dimethyl, 1,4,phenylene oxide) blends
- New semiladder polymers. Part II: Synthesis and properties of new poly(amideimidazopyrrolones)
- Polymer Communication Effective interaction parameter between topologically distinct polymers
- Characterization of amorphous domains in cellulosic materials using a FTIR deuteration monitoring analysis
- Spread films of polymethyl methacrylate on aqueous solutions of polyethylene oxide
- Incorporation of glycine residues in even–even polyamides. Part II: Nylons 6,10 and 12,10
- Polymer Communication Crystallization of ethylene–octene copolymers at high cooling rates
- Microscopically viewed structural change of PE during the isothermal crystallization from the melt II. Conformational ordering and lamellar formation mechanism derived from the coupled interpretation of time-resolved SAXS and FTIR data
- Monitoring of electroinitiated polymerization of aniline by Raman microprobe spectroscopy
- Synthesis and solution properties of a quaternary ammonium polyampholyte
- Infrared and Raman spectroscopy of cyclohexa(p-phenylene sulfide) and the polymer obtained therefrom
- Synthesis and non-isothermal crystallization behaviors of poly(ethylene isophthalate-co-terephthalate)s
- Orientational dynamics in the crystalline and amorphous states of side-chain liquid crystalline polysiloxane probed by second harmonic generation
- Kinetic study of the photo-induced copolymerization of N-substituted maleimides with electron donor monomers
- Liquid crystal dimers with organosilicon spacers as models for side chain LC polymers
- Influence of casting solvents on microphase-separated structures of poly(2-vinylpyridine)-block-polyisoprene
- Modification of poly(styrene-stat-acrylonitrile) to promote polymer blend miscibility through hydrogen-bonded (2,4-diamino- 1,3,5triazine)maleimide interactions
- Polymer Communication Change in handedness of cholesteric liquid crystal during swelling in water for crosslinked hydroxypropyl cellulose films filled with cellulose powders
- Miscibility and properties of polyglutarimide poly(styrene-co-maleic anhydride) blends
- Polymer Communication Local mobility of substituted polyacetylenes measured by quasielastic neutron scattering and its relationship with gas permeability
- 1992 рік
- Synthesis, polymerization and copolymerization of N-( 2-acryloyloxyet hyl ) phthal i mide
- A high frequency resonant method for the determination of the dynamic mechanical properties of solid polymers
- Analysis of the kinetics of the thermal decomposition of poly( 1,6- b is-N-ca r bazo lyl- 2,4- h exad iyn e ) obtained using thermogravimetric analysis
- Epitaxial crystallization of syndiotactic polypropylene on uniaxially oriented polyethylene
- Evaluation of the plastic zone at the crack tip of strain hardening low density polyethylene
- Relation between the quality of the solvent and the number of statistical segments of a polymer at the onset of excluded-volume and complete excluded-volume behaviour
- Introduction of colloidal silver into a poly(2-vinyl pyridine) microdomain of microphase separated poly(styrene-b-2-vinyl pyridine) film
- Studies on mechanical properties of polymer composites by X-ray diffraction: 3. Mechanism of stress transmission in particulate epoxy composite by X-ray diffraction
- Viscosity behaviour of poly(ether imide) in solution: intramolecular interaction and intermolecular association effects
- Fibres of poly ( methoxy-2-ethyl-hexyloxy ) phenylenevi nylene prepared from the soluble, fully conjugated polymer
- Lattice polymers: behaviour far from O-conditions
- Water soluble copolymers: 44. Ampholytic terpolymers of acrylamide with sodium 2-acrylamido-2-methylpropanesulphonate and 2-acrylamido-2-methylpropanetrimethylammonium chloride
- Polymerization of propene with catalyst systems composed of AI20 3 or MgCl2-supported zirconocene and AI (CH 3) 3
- Molecular weight dependence of mobility in polymer blends
- Influence of solvation temperature on the molecular features and physical properties of fibroin membrane
- Viscosity of aqueous glucomannan-borate complex solutions
- Mutual entanglements in poly(vinyl acetate) / poly ( methyl acrylate ) interpenetrating polymer networks
- Anionic grafting of polystyrene and poly(styrene-block-isoprene ) onto microparticulate silica and glass slides
- The effect of DOP plasticizer on smoke formation i n poly( vinyl chloride)
- Blending studies of styrene and =-methyl styrene copolymers: a guide to the segmental interaction parameter
- Organic conducting polymers: synthesis, characterization and conductivity of polyethynylfluorenol
- The surface characterization of model charged and sterically stabilized polymer colloids by SSIMS and X.p.s.
- Theory of supermolecular structures in polydisperse block copolymers: 5. New double cylindrical structure in binary mixture of cylinder-forming diblock copolymers
- Comparison of different synthetic routes for sulphonation of polyaniline
- Dynamic light scattering study on a bimodal end-linked polydimethylsiloxane network structure
- The initiation activity and kinetic behaviour of the volatile products of plasmas in methyl methacrylate polymerization
- The compatibilizing effect of diblock copolymer on the morphology of immiscible polymer blends
- Time-resolved determination of volume shrinkage and refractive index change of thin polymer films during photopolymerization
- Sol or gel-like behaviour of ideal silica-siloxane mixtures: percolation approach
- Ziegler-Natta polymerization under high intensity ultrasound
- Interpretation of dynamic scattering experiments on ternary polymer mixtures
- Molecular architectural changes in hydrated macroporous styrene-divinylbenzene resin sorbents revealed by transmission electron microscopy using image analysis
- Synthesis of imide siloxane prepolymers using blocked isocyanates
- Isothermal thickening and thinning processes in low molecular weight poly(ethylene oxide) fractions crystallized from the melt: 2. Crystals involving more than one fold
- Ion association effects and phase separation in poly ( propylene oxide) modified poly (dimethylsiloxane) complexed with triflate salts
- Determination of the equation-of-state parameters of poly(methyl acrylate)
- Interdiffusion of free and grafted poly (methylmethacrylate) with polyvinylchloride, studied by infrared spectroscopy
- Transient phase diagram of ternary polyetherimide solutions: effect of polymer association
- A new solvent for poly(ether ether ketone)
- Chain conformation in poly(vinylidene cyanide-vinyl acetate): solid state and solution 2D and 3D n.m.r, studies
- Theory of Markov chain copolymerization in terms of an intermonomer correlation coefficient and the arrangement of monomers along the polymer chain
- The fabrication of rnicroporous polyethylene having a negative Poisson's ratio
- Self-assembling monolayer silane films as adhesion promoters
- Synthesis and characterization of polystyrenes fitted with either pendent or chain end hydroxyethyl functional groups
- X-ray structure determination of poly(di-n-hexyl silane)
- Ellipsometric studies on mutual diffusion and adhesion development at polymer-polymer interfaces
- Graft copolymerization of styrene and acrylonitrile on to polybutadiene in the presence of n-butyl acrylate
- Structural formation of poly(ethylene terephthalate) during the induction period of crystallization: 1. Ordered structure appearing before crystal nucleation
- Some effects of structure on the cure of glycidylether epoxy resins
- Polyurethane networks based on poly (ethylene ether carbonate) diols
- Structural formation of poly(ethylene terephthalate) during the induction period of crystallization: 2. Kinetic analysis based on the theories of phase separation
- The mechanism of epoxy-resin curing in the presence of glass and carbon fibres
- Polylactones: 23. Polymerization of racemic and meso D,L-lactide with various organotin catalysts stereochemical aspects
- Dielectric relaxation properties of linear polyesters derived from fl-propiolactone
- Effects of melt-blowing process conditions on morphological and mechanical properties of polypropylene webs
- The influence of temperature on the structure of poly (2,6-hydroxynaphthoic acid
- Dielectric monitoring of phase separation during cure of blends of epoxy resin with carboxyl-terminated poly ( butadieneco- acrylonitrile)
- Miscibility and immiscibility in functionalized associating polymer systems: polystyrene-poly ( phenylene oxide) blends
- Synthesis, characterization and thermal degradation studies of poly(ether ether ketone) copolymers
- An infra-red study of conforrnational changes occurring during the drawing of PEMT, PET and PEMT/PET copolymer
- Compatibility effect on moisture diffusion in polyimide blends
- Polymers with pharmacological activity: 7. Synthesis and stereochemistry of polymeric derivatives of 4-methoxyphenylacetic acid
- Epoxy resin analysis by Fourier transform mass spectrometry: a comparison of pyrolysis and laser ablation
- On the mechanical -relaxation modes of polycarbonate
- Synthesis, characterization and preliminary in vitro blood compatibility evaluation of poly ( methyl methacrylate-g-urethane)
- Interfacial activity of graft copolymers in blends: effect of homopolymer molecular weight
- Residual stress behaviour of isomeric PMDA-ODA polyimides
- Relaxation behaviour of highly polydisperse polymer melts
- Estimation of miscibility of polymer blends using the solubility parameter concept
- Strength of vibration-welded polyca rbonate- poly ( butylene terephthalate )- blend butt welds
- Statistical thermodynamics of a lattice fluid: pure polymer
- Miscibility and properties of poly(vinyl butyral) and thermoplastic polyurethane blends
- Influence of deformation defects on the development of strain gradients during the tensile deformation of polyethylene
- X-ray photoelectron spectroscopic studies of H2SO 4 protonated polyaniline
- Orientational correlations in polyisoprene/poly(vinylethylene) mixtures
- Effect of chain length on the network modulus and entanglement
- Graft copolymerization of hydroxylic methacrylates and ethyl acrylate onto amylopectin*
- Effects of chain structure and orientation on the morphology and fracture properties of polyethylene
- The effect of molecular structure and polymer morphology on the fracture resistance of high-density polyethylene
- Kinetic study of the photoinitiated polymerization of a liquid crystalline diacrylate monomer by d.s.c, in the isothermal mode
- p-Hydroxybenzoate/ethylene terephthalate copolyester: structure of high-melting crystals formed during partially molten state annealing
- Benzene ring orientation in uniaxialplanar poly (ethylene terephthalate) films
- Study of phenolic copolymer-acrylic copolymernon- ionic polymer-transition metal ion interactions and formation of multicomponent complexes
- Some properties of poly [ bis (halophenoxy) phosphazenes ]
- Molecular orientation and conformational changes due to uniaxial-planar deformation of poly (ethylene terephthalate) films
- Light scattering studies of the gelation process in an aqueous system of a non-ionic polymer and a cationic surfactant
- Internal stress and mechanical properties of epoxy resin coatings cured with acid catalyst in the presence of THF
- Counterion activity in dilute salt-free solutions of some anionic polyelectrolytes
- Small-angle neutron scattering from poly (vinyl alcohol )-borate gels
- High-resolution pyrolysis-gas chromatography for the study of epoxy resins cured with prepolymers of varying molecular weight
- Phase behaviour of blends of poly(acetonyl methacrylate) with poly (styrene-coacrylonitrile) and poly(p-methylstyreneco- acrylonitrile)
- A light scattering study on films of a nematic main chain thermotropic liquid crystalline polymer
- Thermodynamic interactions and characterization of poly(p-chlorostyrene) with some aliphatic and aromatic probes by inverse gas chromatography
- Dynamic scaling of the structure function for spinodal decomposition in critical and non-critical mixtures of poly(vinyl acetate)-poly (methyl methacrylate)
- Irradiation effects on aromatic polymers: 1. Gas evolution by gamma irradiation
- Limitations of graphical procedures based on excluded-volume theories for the determination of Ko
- Effect of temperature on the reflective properties of chiral nematic (trityl) ( hexyl )- cellulose films
- Irradiation effects on aromatic polymers: 2. Gas evolution during electron-beam irradiation
- Crosslinking of OH-functional polystyrenes through urethane bridges: kinetics of the three-dimensional addition reaction between hydroxyethyl functions and isocyanate groups of crosslinker
- Role of ceric ion in the heterogeneous graft polymerization of olefins on cellulose
- Irradiation effects on aromatic polymers: 3. Changes in thermal properties by gamma irradiation
- Kinetics of free radical styrene polymerization with the symmetrical bifunctional initiator 2,5-dimethyl-2,5-bis (2-ethyl hexanoyl peroxy) hexane
- Aggregation state and mesophase structure of comb-shaped polymers with fluorocarbon side groups
- Structural changes in ferroelectric phase transitions of vinylidene fluoride-tetrafluoroethylene copolymers: 1. Vinylidene fluoride content dependence of the transition behaviour
- The influence of the microstructure of some chlorine containing polymers on their miscibility with poly(butadiene-stat-acrylonitrile)
- Infra-red study of diffusion of CO= in highly oriented polyethylene films
- Structural changes in ferroelectric phase transitions of vinylidene fluoride-tetrafluoroethylene copolymers: 2. Normal-modes analysis of the infra red and Raman spectra at room temperature
- Structural characterization of butadiene/acrylonitrile copolymers by fast atom bombardment mass spectrometric analysis of the partial ozonolysis products
- Heteronuclear two-dimensional n.m.r, study of polymers: '3C-1H shift correlations for resonances from 1-cyano-1-methylethyl end groups
- 13C n.m.r, analysis of fluorinated polyimides and poly (amic acid ) s
- Quantitative analysis of mixtures of ethylene- and propylene-based polymers by temperature-rising elution fractionation and 13C nuclear magnetic resonance
- Stationary forms of polymer chains
- Molecular and mechanical characterization of reactive ethylene-propylene elastomers and their use in PA6-based blends
- Synthesis and characterization of a composite containing poly(3-methylthiophene) and nitrilic rubber
- Elastic modulus of the crystalline regions of Tussah silk
- Oligomers as molecular probes of orientational coupling interactions in polymer melts and networks
- Water soluble copolymers: 46. Hydrophilic sulphobetaine copolymers of acrylamide and 3- (2-acrylamido-2-methylpropanedimethylammonio )-1 -propanesulphonate
- The toughness of epoxy polymers containing microvoids
- Effects of gelation on spinodal decomposition kinetics in gelatin
- Free radical copolymerization of furfuryl methacrylate and N-vinylpyrrolidone
- Application of a high pressure d.t.a, to study the pressure-glassification of polystyrene
- Strength analysis of polymeric films
- Polymerization-depolymerization of 1,3-dioxolane
- Hydrogen bonding and crystallization behaviour of segmented polyurethaneurea" effects of hard segment concentration
- Effect of network structure on thermal and mechanical properties of cured epoxide resins
- Anisotropic phase separation kinetics in a polymer blend solution following cessation of shear studied by light scattering
- Theta temperatu re of poly (N-vi nyl pyrrolidone ) in water
- The effect of thermal ageing on impact-modified engineering resins
- Atomic force microscopy of cellulose microfibrils: comparison with transmission electron microscopy
- Structure and properties of carboxylatotelechelic polyisoprene
- Slow crack growth in blends of HDPE and UHMWPE
- Transesterification in poly ( butylene terephthalate) / polyarylate blends
- A molecular mechanics investigation into the -relaxation of poly ( propyl methacrylate)
- Molecular and macroscopic orientational order in aramid solutions: a model to explain the influence of some spinning parameters on the modulus of aramid yarns
- Blends of bacterial and synthetic poly(fl-hydroxybutyrate): effect of tacticity on melting behaviour
- Electrical conductivity of polydiacetylene, poly [5,7-dodecad iyn-1,1 2-diol- bis ( nbutoxy carbonylmethyl urethane)] gel: 1. Sol-gel transition and conduction mechanism
- Hydrophobic recovery of oxygen-plasmatreated polystyrene
- Molecular composites of ionic Kevlar/poly(4-vinylpyridine) via ion-dipole interactions
- Carbon-13 liquid- and solid-state nuclear magnetic resonance and infra-red studies of amine-cured epoxy resins
- Fluorescence study of polyelectrolyte complex formation: 2. Effect of acidity of polyanions on complexation
- tert-Butoxycarbonylated novolacs as chemically amplified dual-tone resists
- Thermal sequence randomization of a wholly aromatic copolyester having an ordered sequence
- Characterization of poly (2,6-dimethyl-1,4-phenylene ether) by high resolution pyrolysis-gas chromatography ( H R-Pyg.c. )
- A calorimetric study of various alcohols in a poly (dimethylsiloxane) membrane
- The toughening of epoxy resins with thermoplastics: 1. Trifunctional epoxy resin-polyetherimide blends
- The photopolymerization of acrylates and methacrylates containing silicon
- Conjugation of phosphatidylethanolamine to poly(N-isopropylacrylamide) for potential use in liposomal drug delivery systems
- Crosslinked polycarbonate polyurethanes: preparation and physical properties
- New surface-coating materials: electron-beam curing of some silicon-containing acrylates
- Twistons and phase transitions in polymethylene systems: a spectroscopic study
- Effect of creep on the Young's modulus of aramid fibres
- Effect of additive salts on ion conductivity characteristics in solid polymer electrolytes
- Neutron scattering by rnultiblock copolymers of structure (A-B) N-A
- Imide-aryl ether benzothiazoles
- Polymerization of p-diethynylbiphenyl via oxidative or catalytic reactions
- Thermally stimulated current study of relaxation in glassy polycarbonate
- Dynamic mechanical properties of poly ( monocyclohexyl itaconate)
- Spontaneous polymerization of styrene in the presence of acid: further confirmation of the Mayo mechanism
- Thermally stimulated depolarization of a copolymer of poly(ethylene terephthalate) and p-hydroxybenzoic acid
- Isotactic polypropylene / hydrogenated oligo(cyclopentadiene) blends: 1. Thermal and dynamic-mechanical behaviour of annealed samples
- Polymerization of surface-active monomers: 4. Copolymerization of long-chain alkyl salts of 2-dimethylaminoethyl methacrylate with methyl methacrylate or styrene
- Dielectric relaxation of model network polymers
- The influence of heterogeneous crosslink density on the therrnornechanical and hygrotherrnal properties of an unsaturated polyester resin: 1. Thermomechanical response
- A novel high-temperature non-aqueous dispersion polymerization route to fully aromatic main-chain liquid-crystal polymers
- Ionic motions in network polymers containing lithium perchlorate
- On the crystal structure of the orthorhombic form of syndiotactic polystyrene
- Acetylene polymerization on Rh (I) complexes
- Small-angle X-ray scattering investigation of ionomer deformation: effect of neutralizing cation
- Extended chain crystal growth of low molecular mass poly(ethylene oxide) and ,og-methoxy poly (ethylene oxide) fractions near their melting temperatures
- A statistical approach to slow crack propagation in craze-prone polymers
- Thermal and photo-oxidative degradation of poly ( 5',6'- bis (trifl uoromethyl ) - bicyclo [ 2.2.2 ] octa-5',7'-d iene-2',3'-d iyl ) -1,2- ethenediyl, the Durham polyacetylene precursor polymer, and polyacetylene
- Seeded latex polymerizations: studies on the particle growth mechanism of latex particles
- Physical ageing of an epoxy resin/polyethersulphone blend
- Thermodynamic prediction of molecular morphology of amorphous regions of drawn semicrystalline polymers
- Dynamic scaling and fractal behaviour of spinodal phase separation in polymer mixtures of poly ( methyl methacrylate) with poly (styrene-co-acrylonitrile)
- Dynamics of stretched swollen networks
- 23Na n.m.r, studies of partially neutralized poly (galacturonic acid)
- Interactions between aluminium ions and acrylic acid-acrylamide copolymers in aqueous solution: 3. Influence of ionic strength on gelation and phase separation
- Maleic anhydride grafting on EPDM rubber in the melt
- Beta relaxation in polyirnides
- Characteristics of permeation and separation of aqueous alcohol solutions through crosslinked pullulan membranes
- Determination of the tacticity of polymethacrylates obtained from graft copolymers
- Observation of the heat exchange during deformation using an infra-red camera
- Electrical noise generated during the capillary flow of poly(ethylene oxide) solutions. The influence of the solvent power
- Dynamics of stretched swollen networks
- Self-crosslinkable ternary blend of chlorosulphonated polyethylene, epoxidized natural rubber and carboxylated nitrile rubber
- Mixing relationships in aliphatic polyamide blends
- Thermal and structural study of the phase transitions in liquid crystalline poly ( heptamethylene terephthaloyl-bis-4-oxybenzoate)
- Plasticity of rubber-toughened poly(methyl methacrylate): effect of rubber particle size
- Simulation of propylene polymerization: an efficient algorithm
- A structural study of poly(p-phenylene vinylene)
- Relaxations in thermosets: 15. Curing kinetics and dielectric behaviour of butadiene-acrylonitrile-containing epoxide thermosets
- In situ polymerization of tetraethoxysilane in poly(methyl methacrylate): morphology and dynamic mechanical properties
- Morphology of binary blends of linear and branched polyethylene: composition and crystallization-temperature dependence
- Mechanical and structural properties of extruded strands of blends containing a liquid-crystalline polyester with poly(ethylene terephthalate)
- In situ polymerization of tetraethoxysilane in polymers: chemical nature of the interactions
- Re-examination of poly(methyl methacrylate)/poly ( epichlorohydrin ) blends by small angle neutron scattering and differential scanning calorimetry
- Thermal behaviour and miscibility of poly(3-hydroxybutyrate)/poly(vinyl alcohol) blends
- The synthesis and polymerization of a hyperbranched polyether macromonomer
- Characterization of the rigid phases in ethene-propene copolymers by solid state n.m.r, spectroscopy
- Effect of curing history on ultimate glass transition temperature and network structure of crosslinking polymers
- Molar-mass chemical-composition distributions of styrene-methyl acrylate copolymers prepared by solution or emulsion polymerization
- Determination of microstructure of hydrophobically modified water-soluble polymers by 13C n.m.r.
- The glass transition temperature of polymer-diluent systems
- Cellulose/poly (2-hydroxyethyl methacrylate) composites prepared via solution coagulation and subsequent bulk polymerization
- A 1H and 13C n.m.r, study of the products from direct polyesterification of ethylene glycol and terephthalic acid
- Glass transition of binary systems: peculiarities at low temperature
- Arylidene polymers: 11. Synthesis of poly [2,5-bis ( m-nitrobenzylidene)- cyclopentanone sulphide] and some theoretical studies on its monomer unit
- Photodegradation of polyimides: 4. Mechanism for the photo-oxidation process based on a model compound
- Pressure-volume-temperature properties of polymethacrylates: anomalous behaviour in the melt
- Preparation of pyridyl-terminated oligodimethylsiloxane and siloxane-grafted copolymers containing pyridyl groups at the side chain ends
- Thermo-response of ion track pores in copolymer films of methacryloyl- L-alanine methyl ester and diethyleneglycolbis- allylcarbonate
- Studies of linear polymer dimensions of polystyrene in cyclohexane over a wide range of temperature by intrinsic viscosity
- Synthesis and properties of copolyesters having an ordered comonomer sequence: copolyesters prepared from naphthylene bis (4- hydroxybenzoate) s and ,t0- bis ( 4-ca rboxyphenoxy ) alkanes
- Effect of polyamide functionality on the morphology and toughness of blends with a functionalized block copolymer
- Modified polysulphone membranes: 1. Pervaporation of water/alcohol mixtures through modified polysulphone membranes having methyl ester moiety*
- Synthesis and characterization of cresol-benzaldehyde oligomers
- Development of crystalline order during hot-drawing of poly(ethylene terephthalate) film: influence of strain rate
- Enhancement of miscibility in blends of poly(vinyl methyl ether) and poly (=-methylstyrene) s modified by incorporation of hydrogen-bonding sites
- Crossover effects on the osmotic pressure and the diffusion coefficient in moderately concentrated polymer solutions
- Crystallization kinetics during hot-drawing of poly (ethylene terephthalate) film: strain-rate/draw-time superposition
- Phase equilibria in mixtures of block copolymer and homopolymer
- Birefringence of aramid fibres
- Characterization of the non-crystalline phase of oriented poly (ethylene terephthalate) by chain-intrinsic fluorescence
- High-solids-content batch miniemulsion polymerization
- Particle entrapping by crazes in HIPS
- Binary blends of poly(chloromethyl methacrylate) and poly (2-chloroethyl methacrylate) with some aliphatic polyesters
- Polymerization of pyrrole by cationic photoinitiators
- Polymerization of 3-alkylthiophenes with FeCI 3
- Aramid/poly(ether sulphone) blend: crystallization accelerated by the presence of amorphous polymer
- Effect of structure on thermal behaviour of nadimide resins: 1
- Crystallization and melting behaviour of PHB and PH B / HV copolymer
- Phase transitions in polyphosphazenes
- Synthesis and polymerization of N-( tert-butyloxycarbonyl )maleimide and facile deprotection of polymer side-chain t-BOC groups
- X-ray structural study of oriented vinylidene fluoride/trifluoroethylene copolymers
- Cloud-point curves and interaction parameters of unsaturated polyester-styrene solutions
- Polyaniline dispersions: preparation of spherical particles and their light-scattering characterization
- Real-time analysis of small-angle X-ray scattering from perfluorocarboxylic ionomer membranes during electrodialysis*
- Hydrophobic hydration of hydroxyalkyl cellulose
- Spin-trapping and electron spin resonance of radicals produced by mastication of EPDM polymers
- Tetrahydropyranyl protected polyhydroxystyrene for a chemically amplified deep u.v. resist
- Development of materials with enhanced optical non-linearity by control of ultrastructure
- Synthesis of polyesters from dimethyl terephthalate, ethylene glycol, poly(ethylene glycol) and 4,4-bis( carbomethoxy)stiIbene, and characterization by H and 2-D n.m.r.
- E.p.r. studies of spin-probed and spin-labelled poly (vinyl benzoate), poly (vinyl cinnamate) and poly (vinyl diisophthalate)
- Observation of steric effect in radical polymerization of dialkyl fumarates by spin trapping with 2,4,6-tri-tert-butylnitrosobenzene
- Ternary blends of sulphonated PEEK and two aromatic polyimides
- Morphology of poly( phenylene sulphide) single crystals grown by a two-stage self-seeding technique
- Reactive polyamides from cycloaliphatic C21 dicarboxylic acid and their evaluation as epoxy curing agents*
- Interfacial adhesion and toughening mechanisms in an alloy of polycarbonate / polyethylene
- Axial tensile and compressive properties of high-performance polymeric fibres
- Property and morphology relationships for ternary blends of polycarbonate, brittle polymers and an impact modifier
- Production of highly crosslinked hydrophilic polymer beads: effect of polymerization conditions on particle size and size distribution
- A gel permeation chromatography study of electrochemically synthesized poly (3-alkylthiophene) s
- Influence of low energy oxygen ions on some mechanical properties of polyethylene and polystyrene
- Single crystals of poly(m-xylylene adipamide)
- Counterion-specific helix formation of poly(L-glutamic acid) in a crosslinked membrane
- On the use of a density gradient column to monitor the physical ageing of polystyrene
- Electro-optical properties of liquid crystal copolymers and their relationship to structural order
- A broad-line nuclear magnetic resonance study of a vinylidene fluoride/trifluoroethylene copolymer
- Melt grafting of t-butylaminoethyl methacrylate onto polyethylene
- Note on a potential contribution of entropy to the interaction parameter for dissimilar units in copolymers
- On the viscosity of chain polymers
- Interaction parameters for blends containing polycarbonates: 1. Tetramethyl bisphenoI-A polyca rbonate / polystyrene
- Synthesis of graft copolymers of hydrophobic and hydrophilic methacrylates onto amylopectin
- Stereoregularity of adsorbed poly(methyl methacrylate) on the surface of albite ore
- On the viscosity of sodium poly(styrene sulphonate), a flexible polyelectrolyte
- Deformation mechanism of nylon 6 gel and melt films estimated in terms of orientation distribution function of crystallites
- Poly (oxadiazole-imide) s containing hexa fl uo ro iso p ro pyl idene
- Diffusion effects in blends of linear with branched polyethylenes
- Crystallization behaviour and drug release from bacterial polyhydroxyalkanoates
- Tensile strength of solution-spun, ultra-drawn ultra-high molecular weight polyethylene fibres: 1. Influence of fibre diameter
- Acetylene-terminated ether-ketone oligomers
- Poisson's ratio of the crystal lattice of poly (p-phenylene terephthalamide) by X-ray diffraction
- Phase behaviour of blends of poly(tet ra hyd ro pyra nyl- 2- met hyl methacrylate) with poly(styrene-co-acrylonitrile) and poly(p-methylstyrene-co-acrylonitrile)
- Tensile strength of solution-spun, ultra-drawn ultra-high molecular weight polyethylene fibres: 2. Influence of propylene comonomer content
- The amorphous state of bacterial poly [ (R)-3-hydroxyalkanoate ] in vivo
- Mechanical anisotropy and inhomogeneity of an aromatic liquid crystalline polyester
- Phase behaviour of blends of poly (cyclohexyl methacrylate) with poly (styrene-co-acrylonitrile) and poly (p-methylstyrene-co-acrylonitrile )
- Effects of matrix ductility on rubber/matrix interfacially modified epoxy resins
- Ageing phenomena in bacterial poly[(R)-3-hydroxybutyrate]
- Intramolecular energy migration in polyesters from 2,6-naphthalene dicarboxylic acid: polarization of fluorescence in the polymers and in bichromophoric model compounds
- Kinetic parameters for polymerization of methyl methacrylate at 60°C
- Annealing of isotropic nylon-6,6
- Local structural correlations in anisotropic aqueous solutions of hydroxypropyl cellulose
- 13C n.m.r, study of phase heterogeneity in poly(phenylene sulphide)
- The influence of solvent on labelled and free pyrene aggregation in novolac solutions and films
- Electrocoating of carbon fibres with polymers: 2. Electrocopolymerization of monofunctional monomers
- Functional oligomerization of dicyclopentadiene
- Microstructure of vinylidene fluoride and tetrafluoroethylene copolymers by high-resolution 19F nuclear magnetic resonance
- Some physical measurements in the one-phase region of a water-dextranpoly (ethylene glycol ) system
- Structure and properties of rubbertoughened polyethylene-based blends
- Measurement of the internal electric field in a poly(vinylidene fluoride)/poly(methyl methacrylate) blend
- Miscibility of poly(methyl methacrylate) blends with halogen-containing polycarbonates and copolymers
- A rare earth catalyst for diene polymerization based on butyl lithium
- Polymerization reaction dynamics of ethylene glycol methacrylates and dimethacrylates by calorimetry
- Acrylic copolymer-polyelectrolyte interactions' hydrodynamic and electrochemical studies in dimethylformamide-water mixtures
- Interaction parameters for blends containing polycarbonates: 3. Polycarbonate copolymers/styrene- based copolymers
- A new type of highly active polymer-bound rhodium hydroformylation catalyst
- Critical surface tension of poly(vinylidene fluoride-co-hexafluoroacetone) by the contact angle method
- Determination of the viscometric parameters for the system poly (dihexoxyphosphazene)-benzene at 25°C
- Relaxations in thermosets: 22. Curing kinetics and the dielectric properties of an elastomer containing epoxide cured with Ancarnide
- On the chloromethylation of po lyet heret hersu I phone / polyet hersu I pho ne copolymers. The use of triflic acid as catalyst
- Gas solubility in glassy polymers-- a correlation with excess enthalpy
- A review of small molecule diffusion in polyolefins
- Ternary composites of polypropylene/elastomer/calcium carbonate: effect of functionalized components on phase structure and mechanical properties
- Formation and characterization of the fibres and films from mesophase solutions of cellulose in ammonia/ammonium thiocyanate solvent*
- Gas transport properties of polysulphones: 3. Comparison of tetramethyl-substituted bisphenols
- The mobility of ethyl acetate in poly (vinylidene fluoride) : rheo-photoacoustic Fourier transform infra-red studies
- Analysis of thermally activated plastic deformation for glassy polymer poly(methyl methacrylate)
- Quaternary ammonium derivatives of cholesterol: polymerization and vesicle formation
- Crosslinking of the inner poly(methyl methacrylate) core of poly (=-methylstyreneb- methyl methacrylate) micelles in a selective solvent: 4. Reaction rate effects
- Electronic structure and properties of strained polymers: 1. Methods for polyethylene
- Elasticity of poly(vinyl chloride) melts
- Dynamics of adsorption of poly(ethylene oxide) on a silica surface modified by grafting
- Characteristics of multiblock terpoly(esterether- siloxane) elastomers
- Electronic structure and properties of strained polymers: 2. Rigid-rod PBI, PBO and PBZT
- Williams-LandeI-Ferry versus Arrhenius behaviour: polystyrene melt viscoelasticity revised
- Investigation of polyimides containing naphthalene units: 1. Monomer structure and reaction conditions
- Organobismuth polymers as X-ray contrast materials: synthesis, characterization and properties
- Influence of annealing and casting solvent on the morphology of poly(ethylene oxide )-b-polystyrene-b-poly ( ethylene oxide ) triblock copolymer: compatibility effects
- Novel regular network wholly aromatic polyester and polyamide films
- Dipole moment of poly(thiocarbonate)s derived from bisphenol A
- Rearrangement of the porous structure of macroporous copolymers
- Imide-aryl ether oxadiazole copolymers
- Three-dimensional finite element analysis of single-edge cracked low density polyethylene
- Hydrogen-bonded polymer complexes
- The determination of carbonyls as their 2,4-dinitrophenylhydrazine (DNPH) derivatives in peroxide-containing polymers
- Interdiffusion at polyimide interfaces
- Studies of polystyrene-polybutadiene blend system by inverse gas chromatography
- Effect of branched alkyl spacers in liquid crystalline poly[2,2-dimethyl(trimethylene)terephthaloyl-bis-4-oxybenzoate]
- Chemistry and properties of poly (arylene ether benzoxazole) s
- Miscibility in polybenzimidazole/polyimide sulphone blends: a comparison of blends containing fluorinated and non-fluorinated polyimide sulphone
- Development of a unified mathematical framework for modelling molecular and structural changes in free-radical homopolymerization reactions
- Poly (oxadiazole-amide) s containi ng hexafluoroisopropylidene
- Partial and complete chemical modification of poly (1,1 -dimethyl-1 -sila-cis-pent-3-ene ) by addition of dichloroketene
- Toughening of phase-homogenized mixtures of nylon-6 and poly(m-xylene adipamide) with a functionalized block copolymer
- Modelling the swelling of crosslinked elastomers by supercritical fluids
- New copolymer of vinyl p-tert-butylbenzoate with 3-methacryloxypropyltris( trimethylsiloxy)silane and oxygen permeability
- Chiral polymer materials: a protective group approach to ascertain asymmetric inductions in the backbone of 1,2-disubstituted vinyl type polymers by chiral template mediated polymerization*
- Fracture energy analysis of single-edge-cracked isotropic ductile polyolefins
- Volume-phase transitions of cationic polyelectrolyte gels
- Synthesis of bis (p-phenylene) -32-crown-4 and bis (m-phenylene) -30-crown-4 macrocycles for the preparation of polyrotaxanes
- Optically controlled ligand delivery: 3. Photocleavage of 2-nitrobenzyl bonds at solid-liquid interfaces
- Effect of particle size on the fracture toughness of epoxy resin filled with spherical silica
- Gelation rates of poly(vinyl alcohol) solution
- Polymerization and properties of poly(3-chlorodiphenylamine): a soluble electrochromic conducting polymer
- Distinct behaviour of Ti and Hf supported catalysts in the polymerization of different monoalkenes
- Anomalies in the crystallization of cis-l,4-polyisoprene in blends with poly ( vi nylethylene )
- Copolymerization of propylene and 4- ( -alkenyl) -2,6-di-t-butylphenol over a supported high-activity Ziegler-Natta catalyst
- Use of phase transfer catalysts to aid initiation in suspension vinyl polymerization
- Metalloporphyrins catalyse cis-polybutadiene to polyepoxide
- Mean-field lattice equations of state: 4. Influence of pressure on the phase behaviour of the system polystyrene/cyclohexane
- Mechanisms of the bulk copolyesterification of azelaic acid, o-phthalic anhydride and trimethylolpropane studied by 13C nuclear magnetic resonance
- The effect of pressure on the determination of the Flory-Huggins Z parameter by vapour pressure measurements
- Preparation of spherical polybenzimidazole particulates using a non-aqueous suspension methodology
- Mean-field lattice equations of state: 5. Influence of pressure on liquid-liquid phase behaviour of polymer blends
- Surface properties of poly(vinyl alcohol) films with a fluoroalkyl group at one end
- Fourier-transform analysis of models for the orthorhombic crystal phase of the alternating ethylene-tetrafluoroethylene copolymer
- Poly(arylene sulphide)s from masked bisthiophenols
- The glass temperature of polymer blends: comparison of both the free volume and the entropy predictions with data
- Anionic polymerization and polymer properties of 2-isopropenylnaphthalene and 2-vinylnaphthalene
- A comparison of oligomers and polymers in poly(aryl ketone): effect of chain folding on crystal morphology and generalizations therefrom
- Preparation of poly(p-phenylene vinylene) deuterium labelled in the vinylene positions
- The pressure-volume-temperature properties of polyethylene, poly(dimethyl siloxane), poly (ethylene glycol ) and poly(propylene glycol) as a function of molecular weight
- Study of two-step capping in the synthesis of epoxy-terminated polystyrene oligomers by acid-base titration and gel permeation chromatography
- Dimensions of crystallites in a thermotropic random copolyester
- On the growth rate maximum in extended-chain growth of crystals of linear paraffins
- Thermotropic aqueous gels and solutions of N.N-dimethylacrylamide-acrylate copolymers
- The density profile at a polymer/solid interface
- Influence of a two-step process and of different cure schedules on the generated morphology of a rubber-modified epoxy system based on aromatic diamines
- Small angle neutron scattering from deuterated polystyrene/poly (vinylmethyl ether)/protonated polystyrene ternary polymer blends
- Brownian dynamics simulation of flexible polymer chains with excluded volume and hydrodynamic interactions. A comparison with Monte Carlo and theoretical results
- Quantitative analysis of the Si-H groups formed on poly(dimethylsiloxane) surfaces: an ATR FTi.r. approach
- Influence of prepolymerization on gelation of diepoxide-diamine systems
- Ultrasonic measurements of the elastic moduli of liquid crystalline polymers
- Mechanism for gas formation in polyethylene catalytic decomposition
- Swelling of network structures
- Arylidene polymers: 15. Optical band gap and structural relationship of new polyester films of dibenzylidenecyclohexanone
- Photophysical and charge transfer studies of some model anthracene-backboned polyesters
- The structure of associated ionic species in poly ( propylene oxide )-alkali metal trifluoromethanesulphonate complexes
- Elastomeric behaviour of crosslinked poly(aryl ether ketone)s at elevated temperatures
- C nuclear magnetic resonance study of structure of poly (4-methyl-1 -pentene) prepared by cationic polymerization
- General procedure for evaluating apparent crystallinity and substantial crystallinity from WAXS patterns of binary and ternary copolymers
- Non-reactive polyamides from C3e dimer acids: preparation and properties
- On the structural origins of solid-state urethane polydiacetylene thermochromism: thermal and structural properties of IPUDO monomer and polymer
- Observation by 13C n.m.r, of H-crosslinks and methyl end groups due to main-chain scission in ethylene-propylene copolymers after -irradiation
- EXAFS studies on Zn( II) complexes with 1,3-bis( aminomethyl)cyclohexane of ethylene-methacrylic acid copolymer
- Cyclopolyrnerization: XVIII. Electron spin resonance studies on N-methyI-N-allylmethacrylamide and allyl crotonate
- A more accurate corresponding states reduced equation for solvent / polymer systems
- Liquid crystal elastomers based upon cellulose derivatives
- Electrical conductivity of polydiacetylene P (4BCMU ) gel : 2. A percolation model for elasticity and conductivity
- Chemistry and properties of poly(arylene ether 1,3,4-oxadiazole) s and poly (arylene ether 1,2,4-triazole) s
- Phase diagrams of quasi-binary polymer systems with LCST/UCST spinodals and hour-glass cloud-point curves
- Effect of block copolymer architecture on compatibility: 1. Epoxidized styrenebutadiene copolymers with chlorinated polymers
- Electrical anisotropy of horizontally oriented diblock copolymers
- Synthesis and polymerization of isopropenyl-l,3,5-triazines with a branched alkyl group
- Synthesis and polymerization of 3,2-thienyl chromium acrylate
- Polymer-filler interactions in poly(vinyl chloride) filled with glass beads: effect of grafted poly(methyl methacrylate)
- Aggregation states and electro-optical properties of the induced smectic phase by mixing a nematic liquid crystalline polymer and a low molecular weight liquid crystal
- Re-examination of a proposed method to obtain Avrami parameters directly from non-isothermal crystallization data
- The low-temperature structure of poly (di-n-hexyl germane)
- Anisotropic polymerization shrinkage behaviour of liquid-crystalline diacrylates
- Polymer distribution in silica aerogels impregnated with siloxanes by H nuclear magnetic resonance imaging
- Ruthenium tetroxide staining of polybutylene terephthalate (PBT) and polyisobutylene-b-PBT segmented block copolymers
- Energy calculations of the crystal structure of poly (di-methyl silane)
- Investigation of post-radiation grafting of acrylamide onto polypropylene films
- 13C nuclear magnetic relaxation and dynamic behaviour of poly(P-hydroxybutyrate) in chloroform solution
- Formation of Langmuir-Blodgett films composed of polydiacetylene and copper tetracynoquinodimethane
- Cooperative relaxations in amorphous polymers studied by thermally stimulated current depolarization
- The existence of a stable # form in oriented poly ( butylene terephthalate)
- The electron beam curing of dialkyltin diacrylates
- The crystallinity of poly(ether ether ketone)
- Stark effect on persistent spectral hole burning and dipole moment characteristics of anthraquinone derivatives doped in polymers
- Structure formation and properties of biaxially oriented polyethylene films by compression of injected mouldings
- Elasticity networks networks unswollen, and undiluted state measurements on bimodal in elongation and compression : crosslinked in solution and studied networks crosslinked in the and studied swollen
- Synthesis and characterization of narrowly distributed block copolymers from polystyrene and polymethylphenylsiloxane
- Structure and thermodynamics in polymer blends. Neutron scattering measurements on blends of poly(methyl methacrylate) and poly(styrene-co-acrylonitrile)
- Dependence on spacer size of the intramolecular excimer emission from model compounds for polyesters derived from isophthalic or terephthalic acid
- Tensile deformation and failure of poly(p-phenylene terephthalamide) fibres
- Study of the influence of physical ageing and rejuvenation on macroradical reactivity in polycarbonate
- Stress transmission in silica particulate epoxy composite by X-ray diffraction
- Water-soluble copolymers: 26. Fluorescence probe studies of hydrophobically modified maleic acid-ethyl vinyl ether copolymers
- Behaviour of advanced polymer composites in erosive/corrosive environments
- X-ray diffraction, conformational analysis and stereoregularity of a crystalline poly ( 3-met hyl-1,3- pentad iene )
- Attenuated total reflectance Fourier transform infra-red studies of crystalline-amorphous content on polyethylene surfaces
- I.r. spectroscopy and 1H n.m.r, broad line studies of poly(p-phenylene sulphide) doped with sulphur trioxide
- Structural and materials properties of a polysulphide-modified epoxide resin
- Correlation of steady-state and time-dependent studies of a two-phase isotactic polystyrene gel
- Organo-soluble, segmented rigid-rod polyimide films: 2. Properties for microelectronic applications
- Stereostructure of regioirregular unit of polypropylene obtained with rac-ethylenebis( 1 -indenyl )zirconium dichloride/ methylalurninoxane catalyst system studied by 13C-1H shift correlation two-dimensional nuclear magnetic resonance spectroscopy
- Investigation into double yield points in polyethylene
- Time-resolved excimer fluorescence studies as a probe of the coil collapse transition and phase separation in isotactic polystyrene/benzyl alcohol gel
- Molecular, thermal and morphological characterization of narrowly branched fractions of 1-octene LLDPE: 2. Study of the lamellar morphology by transmission electron microscopy
- A study of the structure and crystallinity of 4-methyl-1-pentene copolymers with 1,5-hexadiene by zac nuclear magnetic resonance and X-ray diffraction methods
- Thermo-mechanical studies of highly oriented poly( ethylene terephthalate)
- Dielectric properties of glassy cationic epoxide-amine addition polymers
- Nuclear magnetic resonance studies of selectively deuterated aromatic liquid crystalline copolyesters
- Plasticization and antiplasticization effects of sulphonium salt initiator fragments remaining in cycloaliphatic epoxy resins cured by electron beam and ultraviolet irradiation
- Temperature distribution in poly( ethylene terephthalate) plate undergoing heat treatment. Diffusion influence: I. Theoretical approach
- Polymeric photoinitiators bearing side-chain benzoin methyl ether moieties: reactivity and excited-state processes
- Structure of initial and ultimate chain units of polydienes obtained with rare-earth catalysts as revealed by 2H nuclear magnetic resonance spectroscopy
- Rubber toughening of polyamides with functionalized block copolyrners: 1. Nylon-6
- Oxygen effects on anisotropic photopolymerization in polymer matrices
- Dynamics of polymeric liquids using polarization-modulated laser Raman scattering
- Structure of initial, ultimate and inner chain units of polybutadiene obtained with a rare-earth catalyst as revealed by 13C nuclear magnetic resonance spectroscopy
- Rubber toughening of polyamides with functionalized block copolymers: 2. Nylon-6,6
- A kinetic study of polypyrrole degradation
- Enthalpic interaction in block copolymer/homopolymer blend systems: morphological studies of solvent-cast films
- E.p.r. spectroscopy of spin-labelled macromolecules as a tool for determining chain conformations in amorphous solid polymers
- Rheological behaviour of block copolymers in the disordered state: effects of molecular weight and block length ratio
- Polymerization kinetics of rigid-rod-like molecules: 2. Polymerization of poly( 1,4-phenylene-2,6-benzobisthiazole) in the nematic state
- Miscibility studies in blends of poly(N-vinyl pyrrolidone) and poly ( methyl methacrylate) with epoxy resin: a comparison
- Nucleation and crystallization of polypropylene by mineral fillers: relationship to impact strength
- Transient crystallization of an aromatic polyetherimide: effect of annealing
- Effect of composition drift on emulsion copolymerization rate
- Miscibility of blends of poly (n-caprolactone) with aromatic polyesters containing mesogenic biphenyl units
- Fatigue fracture behaviour of PEEK: 2. Effects of thickness and temperature
- Thermal transitions and mechanical properties of films of chemically prepared polyaniline*
- Poly( ethylene-co-methyl acrylate)-solventcosolvent phase behaviour at high pressures
- C n.m.r, characterization of soluble polyaniline
- Miscibility and mechanical properties of poly (ether imide)/poly (ether ether ketone)/liquid crystalline polymer ternary blends
- High temperature retardation mode in epoxy-aromatic amine networks
- Interfacial tension between solutions of polystyrenes: establishment of a useful master curve
- Structure of carbofuran in crosslinked starch matrix by 13C n.m.r. : correlation Of release and swelling kinetics with the dynamic behaviour of polymer chains
- Fluorescence densitometry at polymer-polymer interfaces: interdiffusion in polystyrene-poly(cyclohexyl methacrylate) blends
- A new isothermal equation of state for polymers
- New thermally crosslinkable electron beam resists: 2. Monomethyl itaconate-methyl methacrylate copolymers
- Preparation and properties of block copolyamide fibres
- Interdiffusion in blends of polystyrene and polymethylstyrene studied by light scattering after temperature jumps across the phase boundary
- Theory of supermolecular structures in polydisperse block copolymers: 3. Cylindrical layers of bidisperse chains
- New thermally crosslinkable electron-beam resists: 3. Prediction of the gel clearing dose
- Miscibility studies of polyimide/poly(ether imide) molecular composites
- Dilute-solution behaviour of polyurethane ionomers
- Theory of supermolecular structures in polydisperse block copolymers: 4. Cylindrical domains in binary mixtures of diblock copolymers and cylinder-lamellae transition
- Tetraphenylporphyrin-aluminium compounds as initiators for the ring-opening polymerization of 2,2_dimethyltrimethylene carbonate: synthesis of homopolymers and copolymers with &-caprolactone, ethylene oxide and propylene oxide
- Interfacial crosslinking in an immiscible plastic/rubber blend based on polyacrylic acid and polychloroprene
- Solubility of polyethylene in n-pentane at high pressures
- Kinetic modelling of network formation in styrene-butadiene emulsion copolymers: a comparative study with the generalized form of Flory's theory of gelation
- Characterization of polyolefins by size exclusion chromatography with low-angle light scattering and continuous viscometer detectors
- Dynamic mechanical properties of natural rubber vulcanizates with different curing systems and static strain
- The viscosity of immiscible polymer blends: influences of the interphase and deformability
- The kinetic peculiarities of interpenetrating polymer network formation
- Stereocomplex formation in polybutadiene-syndiotactic poly( methyl methacrylate) block copolymers blended with isotactic poly( methyl methacrylate)
- The boundary layer and its influence on the mechanical behaviour of composites
- Heat capacities of aliphatic and aromatic polysulphones
- Thermodynamics and kinetics of gelation in the poly ( -benzyl ,/-glutamate)- benzyl alcohol system
- Preparation and properties of stat-copoly- (oxyethylene-oxypropylene)-bIockpoly( oxyethylene): 1. Use of crown ether in the anionic copolymerization of propylene oxide and ethylene oxide
- Effect of ionic concentration and counterion on properties of poly(vinyloxyacetic acid)
- Studies on copolymers of acrylonitrile with resins of furfuryl alcohol: 1. Preparation and thermal properties
- Base-induced gelation of polymethacrylonitrile
- Preparation and properties of stat-copoly- (oxyethylene-oxypropylene)-blockpoly( oxyethylene) : 2. Micellization and gelation properties in aqueous solution
- Control of network structure in free-radical crosslinking copolymerization
- Degradation of azo-containing polyurethane by the action of intestinal flora: its mechanism and application as a drug delivery system
- Silica-siloxane mixtures. Investigations into adsorption properties of end-methylated and end-hydroxylated chains
- Polymer-supported quaternary onium salts catalysts prepared via concentrated emulsion polymerization
- Spherical particles obtained by dispersion polymerization: model calculations
- Chemical pathways for the polymerization of enines
- Conformation, environment and reactivity of radicals in copolymerization of methyl methacrylate/ethylene glycol dimethacrylate
- Synthesis, characterization and study of the thermal properties of new polyarylene ethers
- Studies on a series of bis-arylimides containing four phenylene rings and their polymers: 3. Kinetic analysis of the thermal polymerizations
- Polymerization of surface-active monomers: 5. Syntheses and polymerizations of anionic surface-active monomers: sodium di(10-undecenyl)sulphosuccinate and sodium n-undecyl 10-undecenylsulphosuccinate
- Electrochemical and optical properties of thiophene- alkylheteroaromatic copolymers
- Synthesis of poly( styrene-Mock-t-butyl methacrylate) diblock macromonomers possessing central vinylbenzyl groups
- The influence of chain constraints on the kinetics of oriented crystallization under low stress
- Copolycarbonates derived from bisphenol A phthalates
- Computer simulation of aromatic polyesters including molecular dynamics
- Suppression of side reactions during melt functionalization of ethylene-propylene rubber
- Equilibrium and non-equilibrium copolymer micelles: polystyrene-block-poly ( ethyleneco- propylene) in decane and in d iisopropylether
- Redox-active liquid-crystalline ionomers: 1. Synthesis and rheology
- Stable concentrated emulsions as precursors for hydrophilic-hydrophobic polymer composites
- Observation of restricted miscibility in binary blends of poly( styrene-stat-acrylonitrile) and poly (a-methyl styrene-stat-acrylonitrile)
- Gels of poly(vinyl alcohol) from dimethyl sulphoxide/water solutions
- New polymer syntheses: 59. Homoand copolyesters of 4- (4'-hydrophenoxy) benzoic acid
- Novel flame retardant polyphosphoramide esters
- Formation of gradient phase structure during annealing polymer blend
- Interactions of water with unsaturated polyester, vinyl ester and acrylic resins
- Aggregation in solutions of poly(y-benzyl-L-glutamate) monitored by static and dynamic light scattering
- Solid state 13C n.m.r, cross-polarization studies of a poly(methyl methacrylate)/solution chlorinated polyethylene blend
- Bulk copolymerization of methacrylonitrile with n-alkyl methacrylates: rate of copolymerization and reactivity ratios
- Permeation of carbon dioxide and water vapour in plasticized poly (vinylchloride)-starch blends: anomalous behaviour
- Scanning force microscopy of nanostructured uniaxially oriented ultra thin film surfaces of isotactic polystyrene
- Two-dimensional 13C n.m.r, studies of the morphology and orientational order in gel-spun ultrahigh molecular weight polyethylene fibres
- Studies on membranes composed of polymer-bitumen blends
- Influence of temperature on butyl acrylatestyrene copolymerization parameters
- Use of helical parameters to generate candidate conformations for crystal packing: illustrative application to a polyimide
- Electric field orientation of sonicated x-carrageenan in aqueous solution: ionic polarization of loosely bound counterions
- Physical features of blends based in a liquid crystalline polymer: the effect of the mixing devices
- Rheology of dilute polyelectrolyte solutions
- The sequence of initiation of the toughening micromechanisms in rubber-modified epoxy polymers
- Atomic force microscopy of polymer crystals: 1. Chain fold domains in poly(ethylene oxide) lamellae
- Miscibility of poly( vinyl acetate) with poly( chloromethyl methacrylate), poly( Z-chloroethyl methacrylate) and poly( 2-bromoethyl methacrylate)
- The permselectivity of poly(glyceryl methacrylate) membranes: hydrogel analogues of glomerular basement membrane
- Radiation stability of perfluoroethylene-propylene copolymer
- Shear-induced crystallization in a liquid crystalline random copolyester
- Compatibility and transesterification in binary polymer blends
- Properties of polyurethane-poly(methyl methacrylate) graft copolymers
- Enhanced anisotropic ordering and phase separation in lyotropic polysaccharide blends
- Viscometry--a useful tool for studying conformational changes of poly(N-isopropylacrylamide) in solutions
- Intramolecular excimer formation in model compounds for polyesters. Diesters from 2-naphthol and aliphatic dicarboxylic acids
- Bifunctional monomers in photoinduced vinyl grafting on cotton cellulose: use of divinyl benzene in grafting of styrene
- Miscible blends between polyacetal and a styrene-vinyl phenol copolymer
- Study of polymer networks using paramagnetic probes
- In situ preparation of blends of polystyrene and poly (2,6-dimethyl-1,4-phenylene ether)
- A new initiating (minifer) system leading to the synthesis of living telechelic ~-cyclohexyl-~ (tert-chloro) polyisobutylenes*
- Low temperature transmission electron microscopy and differential scanning calorimetry characterization of latexes stabilized with surface active block oligomers
- Synthesis of poly(arylene ether)s containing quinoxaline units
- A crystallization kinetics study of binary blends of linear and branched polyethylene
- An e.p.r, study of the effect of suspension polymerization conditions on the properties of glycidyl methacrylate-ethylene dimethacrylate particles
- A new approach to neutron scattering for non-crystalline hydrogenous polymers
- A crystallization kinetics study of binary blends of linear and branched polyethylene
- Photoconductive properties of annealed Ti02 dispersion composites
- Characterization of crosslinked polyester resins by dynamic mechanical properties
- Electrically conducting ionomers
- Determination of molecular orientation in poly(ethylene terephthalate) by means of =H nuclear magnetic resonance
- Observation of polyimide monolayers by scanning tunnelling microscopy
- Morphology of block copolymers and mixtures of block copolymers at free surfaces*
- Nuclear magnetic resonance approach to properties of poly(ethylene oxide)- poly (methyl methacrylate) blends: 1. Chain dynamics and free volume
- Estimation of surface tension of poly(vinylidene fluoride-co-hexafluoro acetone) by corresponding states theory
- Structural study of syndiotactic polystyrene: 1. Polyrnorphism
- Polyurethanes: effect of chemical composition on mechanical properties and oxygen permeability
- Preparation of polymeric non-linear optical materials from chloromethylstyrene
- High-resolution solid-state z3C nuclear magnetic resonance study of the combined process of 1H spin diffusion and 1H spinlattice relaxation in semicrystalline polymers
- Interaction parameters for blends containing polycarbonates: 2. Tetramethyl bisphenol A polycarbonate-styrene copolymers
- Stress modified Case II diffusion in poly(methyl methacrylate)
- Nuclear magnetic relaxation studies of poly(p-phenylene sulphide) doped with sulphur trioxide
- Influence of physical ageing on the yield response of model DGEBA/poly(propylene oxide) epoxy glasses
- Thermodynamic studies on some copolymer-homopolymer-polyelectrolyte interactions
- Molecular behaviour of elastomeric materials under large deformation: 1. Re-evaluation of the Mooney-Rivlin plot
- The effects of steric hindrance on sub-glass transitions in epoxy polymers
- The crystal structures of aryl ether ketone polymers containing meta-phenyl links
- Chain entanglement in homopolymers, copolymers and terpolymers of methyl methacrylate, styrene and N-phenylmaleimide*
- Analysis of voids in superdrawn polyoxyrnethylene fibres
- New techniques for determining domain morphologies in block copolymers
- Viscoelastic behaviour of thin bioriented poly (ethylene terephthalate) films under low and medium stresses
- Processing, structure and mechanics of fibres of heteroaromatic oxazole polymers
- Crystalline and amorphous morphologies of an aromatic polyimide formed on precipitation from solution
- Structure-property behaviour of segmented poly (tetramethylene oxide ) -based bipyridinium ionene elastomers
- Small-angle X-ray scattering on fibres of heteroaromatic polymers
- Morphology and properties of mixed anion ionomers
- Effects of oxidation on mechanical and physical properties of ultra-high-modulus and ultra-high-molecular-weight polyethylene fibres
- The effects of ionization and epoxy reaction on the surface and mechanical properties of poly (p-phenylene terephthalamide) fibres
- Conversion dependent morphology predictions for composite emulsion polymers: 1. Synthetic latices
- Rheology and phase behaviour of blends of poly ( ethylene oxide) with poly (vinyl acetate) and with poly(vinyl acetate-ran-ethylene)
- Thermal aspects of the kinetics of dimethacrylate photopolymerization
- Phase transitions in solutions of rigid polymers studied by synchrotron radiation
- Effect of initial sample anisotropy on the solvent sorption kinetics of glassy poly(2-hydroxyethyl methacrylate)
- An analysis of polymer-probe interactions in some hydrocarbon polymers using a new solvation equation
- Deformation behaviour of poly(ether ester) thermoplastic elastomers with destroyed and regenerated structure as revealed by small-angle X-ray scattering
- Dynamic micromechanical properties of styrene-butadiene copolymer latex films
- Polymer swelling: 11. A molecular interpretation of association in polystyrene-liquid systems
- WAXD meridional amorphous scattering of =-form nylon-6 fibres
- Fracture behaviour of toughened epoxy resins cured with N.N'-dimethylethylenediamine
- Study of polymer chain in a solution of colloidal particles
- Solid state 13C n.m.r, detection of molecular mixing in polymer blends that exhibit multiple eutectic phase transformations
- Correlation between the equation of state and the pressure dependence of glass transition and melting temperatures in polymers and rare-gas solids
- Phase behaviour and sol-gel transition of poly (vinyl alcohol )-borate complex in aqueous solution
- Reaction of polysiloxanes and iron 2-ethylhexoate
- Permeability and permselectivity of gases in fluorinated and non-fluorinated polyimides
- Carrier transport properties of poly (substituted phenylacetylene) s
- Toughening styrene maleic anhydride copolymers with functionalized ethylene propylene rubbers
- Matrix systems for zero-order release: facile erosion of crosslinked hydrogels*
- Control of molecular weight distribution in step-growth polymerization by an intermediate monomer feed method: effect of interchange reactions
- Curing of epoxy oligomers by isocyanates
- Photopolymerization kinetics of dimethacrylates using the camphorquinone/ amine initiator system
- Novel silicones for transdermal therapeutic systems: 1. Synthesis of 1-methyl-4- pyridinio-terminated polydimethylsiloxane and evaluation as a transdermal penetration enhancer
- Crystallization and melting behaviour of a semirigid liquid-crystalline polyester
- Formation kinetics and viscoelastic properties of semi-interpenetrating networks based on crosslinked polyurethane and poly(butyl methacrylate)
- Preparation and characterization of novel star-shaped copolymers having three different branches
- Miscibility, crystallization behaviour and mechanical properties of binary blends of aramids and poly (ether sulphone)s
- Filler effects on the compatibility and phase separation kinetics of poly(vinyl acetate)- poly(methyl methacrylate) mixtures
- Synthesis and characterization of metal-containing polyurethane-ureas
- Molecular, thermal and morphological characterization of narrowly branched fractions of 1-octene linear low-density polyethylene: 1. Molecular and thermal cha racterization
- Prediction of solubility parameter from thermal transition behaviour in polymers
- Studies on thermotropic liquid crystalline polymers: 4. Synthesis and properties of poly (ether ester amide) s
- Separation of polymerization and crystallization processes for nylon-6
- Hydrophobically end-capped poly (ethylene oxide) urethanes: 1. Characterization and experimental study of their association in aqueous solution
- The use of two-component Einstein specific heat models to investigate the structure of dioxane lignin
- Simultaneous determination of functionality type and molar mass distribution of oligo (1,3,6-trioxocane) s by supercritical fluid chromatography
- Chemical dehydrochlorination of poly(vinyl chloride) by LiCI in dimethylformamide
- Viscometric measurement of the thermodynamic properties of dilute polystyrene solutions
- Blends of poly(aryl ether ether ketone) with thermotropic liquid-crystalline copolyesters: 2. Crystallization kinetics
- Surface-enhanced Raman scattering study of polymer on metal: 1. A new sampling technique using HNO 3 etched metals as the substrates
- Acoustic properties of poly(phenylene sulphide
- The effect of physical interactions on melt-phase homogenization of mixtures of poly (m-xylene adipamide) with aliphatic polyamides induced by interchange reactions
- Molecular resolution of thin, highly oriented poly(tetrafluoroethylene) films with the atomic force microscope
- Long period measurement of isotactic poly(4-methyl-l-pentene) by small angle X-ray scattering in conjunction with selective staining
- Cooperative motion in amorphous polymers: application to the study of free-radical decay in solids
- 2D-INADEQUATE 13C nuclear magnetic resonance assignment of regioirregular poly(1-butene)
- Effect of high hydrostatic pressure on the phenylene motion in polycarbonate as revealed by =H spin-lattice relaxation
- Kinetics of the thiokol-epoxy cure process as studied by the e.s.r, spin probe method
- Statistical group transfer copolymerization. Monomer reactivity ratios for allyl methacrylate and n-butyl methacrylate
- On the analysis of mechanical relaxation at the glass transition in thermoset polymers
- Concentration and temperature dependence of molecular motions in polystyrene/tetrahyd rofu ran solutions
- Cure monitoring of a photosensitive polymer using the luminescent organometallic complex fac-ClRe( CO ) 3 (4,7-Ph2-phen)
- Dynamic behaviour of semidilute solutions and gels of poly( methacrylic acid )
- Modelling the chemorheology of an epoxy resin system exhibiting complex curing behaviour
- Crystallization of syndiotactic polystyrene under pressure
- A kinetic model for olefin polymerization in high-pressure tubular reactors: a review and update
- Poly(vinyl alcohol) hydrogels prepared by freezing-thawing cyclic processing
- Poly[p- (1 H,1 H,2H,2H-perfluoroalkyloxydimethylsilyl ) styrenes] as materials for ethanol-permselective membranes
- Crystals with curved edges: a unified model that mediates between the theories of nucleation-controlled and rough surface growth
- The design of new copolymers for x^(3) applications
- Synthesis of tetraethylene oxide-organosiloxane hybrid and the linear ionically conductive spectra of its membrane doped with LiCI04
- Effect of ultrasonic irradiation on luminescence properties of lanthanide-polyelectrolyte complexes
- The synthesis and characterization of nitrogen-containing ladder polymers and their model compounds
- Synthesis of ~,co-bis(p-hydroxyphenyl ) polysiloxanes
- Morphological characterization of well defined methacrylic based di- and triblock ionomers
- Synthesis of poly(phenylene ether sulphone)s containing aminated chain units
- Formation and break-up of a bead-and-string structure during injection moulding of a polycarbonate/acrylonitrilebutadiene- styrene blend
- Experimental study of electro-optical rotation of helical polypeptides
- Synthesis and properties of polyurethanes based on polyolefin: 2. Semicrystalline segmented polyurethanes prepared under heterogeneous or homogeneous synthesis conditions
- Phase morphology of injection-moulded polyca r bo nate / ac ryl o n it ri le- b utad i en estyrene blends
- Spectroscopic studies of protonation, oxidation and light irradiation of polyaniline solutions
- Therrnotropic liquid crystalline copolyester based on 8-(3-hydroxyphenyl) octanoic acid and p-hydroxybenzoic acid
- Morphology and mechanical properties of ultrahigh-molecular-weight polyethylene prepared by gelation/crystallization at various temperatures
- Cross polarization / magic angle spinning 13C n.m.r, study of solid structure and hydrogen bonding of poly(vinyl alcohol) films with different tacticities
- On the origin of the multiple endotherms in PEEK
- Molecular engineering of liquid crystal polymers by living polymerization: 9. Living cationic polymerization of 5-[ (4-cyano-4'-biphenyl)oxy ] pentyl vinyl ether and 7-[ (4-cyano-4'-biphenyl)oxy ] heptyl vinyl ether, and the mesomorphic behaviour of the r
- Study of polypropylene peroxidation by ozonization using electron spin resonance and transmission electron microscopy
- Polymerization of benzyl alcohol in anhydrous hydrogen fluoride: an efficient synthesis of poly(phenylenemethylene)
- High-resolution solid-state 13C nuclear magnetic resonance study on poly(vinyl alcohol ) / poly (vinylpyrrolidone) blends
- Melting behaviour of poly(phenylene sulphide): 1. Single-stage melt crystallization
- Synthesis of the styrene and methyl methacrylate block eopolymer using a polymer of pentamethylene disulphide
- Phase separation and thermal degradation of poly (vinyl alcohol )/poly ( methacrylic acid ) and poly (vinyl alcohol ) / poly ( acrylic acid ) systems by 13C c.p./m.a.s.n.m.r.
- Melting behaviour of poly(phenylene sulphide): 2. Multiple stage melt crystallization
- Evaluation of preferential solvation by gel permeation chromatography*
- Calculation of crystalline modulus of syndiotactic polystyrene using molecular modelling
- Structure and mechanical properties of poly(vinyl alcohol) gels swollen by various solvents
- Structure of iodine-nylon 6 complex" 1. The investigation of the lattice constants and hydrostatic compression of the complex crystal
- Isotacticity effect on crystallization and melting in polypropylene fractions: 3. Overall crystallization and melting behaviour
- Electrical and mechanical properties of oriented poly (3-alkylthiophenes): 2. Effect of side-chain length
- Influence of the liberation of heat of fusion on the temperature near the crystallization front in polymers
- Elastic modulus of crystalline regions of poly ( ether ether ketone ), poly (ether ketone) and poly (p-phenylene sulphide)
- Properties of thermally treated polypyrroles
- Multiphase material containing poly(L-glutamate) for biomembrane mimetic sensors*
- Crosslinking in blends of nitrile rubbers and poly (vinyl chloride)
- Water-induced nucleation of disc cracks in selected therrnosets
- Supramolecular structure of microbial polysaccharides in solution: from chain conformation to rheological properties
- Miscible polyacetal-poly(vinyl phenol) blends: 1. Predictions based on low molecular weight analogs
- The polymorphic behaviour and the crystal structure of one modification of poly (dimethylphosphazene
- Conformation and dynamics of colloidal aggregates in detergent and copolymer systems
- Miscible polyacetal-poly(vinyl phenol) blends: 2. Thermomechanical properties and morphology
- Crystallization of poly(ethylene oxide) in a mixture with poly (methyl methacrylate) under high pressure
- Preparation of ordered, crosslinked and thermally stable liquid crystalline poly(vinyl ether) films
- Polymers for information storage systems: 4. Thermal and compressive properties of polyacrylates and polymethacrylates
- Analysis of the epoxidation of bisphenol A and phenolic Novolacs with epichlorohydrin
- Polymerization of conducting polymers confined to free surfaces: a comparison of the Langmuir-Blodgett polymerizations of 3-alkyl pyrroles and 2-alkyl anilines*
- Miscibility estimated by the volume change due to mixing of a polystyrene/poly(vinyl methyl ether) blend system
- Semiempirical equation for the excess volumes in simple liquid mixtures and polymer solutions
- Magnetic cellulose fibres and paper: preparation, processing and properties
- On the melting-point depression of copolymer crystals
- Interpenetrating hydrogel networks: 3. Properties of the gelatin-sodium carboxymethylcellulose system
- Self-organization of hydrophobized polyzwitterions
- Arm-number dependence of dimensions of star-shaped polystyrene in a good solvent
- Structural features in epoxy networks from N,N-diglycidyl epoxies and amines: 2. Ether ring formation and polymer structure in the reactions of N,N-diglycidylaniline with aniline and substituted anilines
- Synthesis and properties of functionalized polymers
- Phase behaviour of rigid-rod/coil/solvent ternary systems with rod-coil interaction
- Photochemical isomerization of p.p'- bis ( chloromethyl ) azobenzene incorporated in poly (tertiary aminostyrene) s by cross linkage
- Supramolecular structure of certain amphiphilic liquid crystalline polymers
- Phase separation in mixtures of poly (vinylidene fluoride) and hydroxypropyl cellulose
- Difference in propagation profiles between isotactic and atactic polymerizations with Ziegler-Natta catalysts
- Suprarnolecular architectures based on lipopeptides and liposaccharides
- Control of molecular-weight distribution in step-growth polymerization:the intermediate monomer feed method
- Chain conformation of block copolymers in dilute solutions measured by small-angle neutron scattering
- Stereospecific chlorination of polyacetylene by chemical doping
- Interaction of sodium carboxymethylamylose with aqueous surfactants in both the presence and the absence of added salt: mixed micelles and inclusion complexes
- Preparation of soluble TiCI 3 catalysts by reduction of TiCI 4 with organoaluminium compounds and their use for copolymerization of ethylene with propylene
- Effects of hydrostatic pressure on crack growth in elastomers
- A molecular mechanics study on conformations of bacterial polyester poly- ( 3- hyd roxybutyrate-co-3- hyd roxyva lerate )
- Polymer-metal complexes: 1. Synthesis and characterization of poly(2-hydroxy-4- methacryloxyacetophenone)-metal complexes
- Surface treatment of ultra high molecular weight polyethylene to enhance adhesion and conductivity properties
- Structural study of isolated poly (fl-hydroxybutyrate) granules
- Synthesis and characterization of FeCl -doped polyaniline
- The effect of metal halides on the deformation mechanism of thin films of nylon
- Anionic polymerization of alkyl methacrylates and molecular weight distributions of the resulting polymers
- An electroactive elastomer: polyaniline/nitrile rubber
- 13C n.m.r, studies of the thermal behaviour of aqueous solutions of cellulose ethers
- Transparent and adhesive polymer electrolyte for smart windows: synthesis, characterization and ionic conductivity measurements
- Copolyesters of 4-hydroxy-3-phenylbenzoic acid and 4-hydroxybenzoic acid
- Anionic copolymers of octanelactam with urolactam (nylon-8/12 copolymers): Glass transitions, heats of fusion, crystallinity and specific heats
- Novel maleimide functionalized oligomers: 1. Model compound studies
- Preparation and properties of poly (p-phenylene-1,3,5- hexatrienylene
- Liquid-liquid phase separation in melts of blends of linear with branched polyethylenes: morphological exploration of the phase diagram
- Novel maleimide functionalized oligomers: 2. Co-oligomerization studies
- Polyarylenes and poly(arylenevinylene)s: 8. The first soluble ladder polymer with 1,4-benzoquinone-bismethide subunits*
- The effects of short chain branching and molecular weight on the impact fracture toughness of polyethylene
- Novel maleimide functionalized oligomers: 3. Functionalization of preformed oligomers
- An improved technique of the cumylpotassium preparation: application in the synthesis of spectroscopically pure polystyrene-poly(ethy!ene oxide) diblock copolymers
- Highly anisotropic electrically conducting films based on polypyrrole*
- P o lyhyd ro xyet h e r- po lyd i met hylsi Io xane graft copolymers: 1. Synthesis and cha racterization
- Gas transport in epoxidized natural rubber
- Ester methyl group rotation in poly(methyl methacrylate) and in the blend solution chlorinated polyethylene/poly(methyl methacrylate). A quasielastic neutron scattering study
- Statistical n-butyl acrylate-sulphonatopropylbetaine copolymers: 1. Synthesis and molecular characterization
- Kinetic free volume controlled gas separation properties of glassy polyheteroarylenes
- Diode-array detection with spectral suppression in size exclusion and adsorption chromatography for rapid evaluation of chemical composition in block copolymers of styrene and methyl methacrylate*
- Polyd imethylsiloxane/poly ( methyl methacrylate) interpenetrating polymer networks: 2. Synthesis and properties
- Poly (tetraha Io-p-phenylenechalcogenide ) s: synthesis and properties
- A SANS study of the plastic deformation mechanism in polyethylene
- Bimolecular termination in living ring opening metathesis polymerization
- Aqueous polymerization of N-acryloyl 7-aminobutyric acid*
- A neutron reflectometry study of the production of thin polyphenylene films from precursor polymer
- Changes in lamellar thickness observed in polyethylene single crystal mats as a result of treatment with chlorosulphonic acid
- Second-harmonic generation in poly(=-amino acid) and poly (isocyanate) films
- Study of third-order optical non-linearity and electrical conductivity of sol-gel processed silica: poly(2-bromo-5-methoxy-p-phenylene vinylene) composite
- Microfibrillar reinforcement of polymer blends
- Morphological features and mechanisms of crystallization*
- Time-resolved small angle X-ray scattering and wide angle X-ray diffraction studies on premelting during annealing of gelation crystallized ultrahigh molecular weight polyethylene films
- Pressure dependence of free radical decay in y-irradiated main chain liquid crystalline polymers
- The crystal lamellar morphology of an aromatic polyketone with unusual crystallization and melting behaviour
- Birefringence and orientation of polyethylene zone-drawn under various thermomechanical conditions
- The changes in the apparent activation energies of direct current conductivity during radiation curing of unsaturated polyester resins
- Structure, crystallization and morphology of poly (aryl ether ketone ketone)*
- Dynamic micromechanical investigations into particle/particle interfaces in latex films
- Phase morphology of polymer blends" scanning electron microscope observation by backscattering from a microtomed and stained surface
- Growth rate of isotactic polystyrene crystals in concentrated solutions and in the melt*
- Solution properties of poly( met hyl p henyl )silane
- The ring-banded spherulite structure of poly( -caprolactone) in its miscible mixtures with poly ( styrene-co-acrylo n itri le )
- Equilibrium triple point pressure and pressure-temperature phase diagram of polyethylene*
- Intramolecular excimer formation in polyesters from terephthalic acid and cyclohexanediols with different stereochemical compositions
- Miscibility of poly(N-vinyl-2-pyrrolidone) with a copolyamide
- On the physical properties of BlOPOL/ethylene-vinyl acetate blends*
- Water soluble copolymers: 38. Synthesis and characterization of electrolyte responsive terpolymers of acrylamide, N- (4-butyl) phenylacrylamide, and sodium acrylate, sodium-2-acrylamido-2- methylpropanesulphonate or sodium-3-acrylamido-3-methylbutanoate
- Experimental investigations of light scattering by polystyrene-poly(methyl methacrylate)-good solvent and polystyrene-poly (vinyl acetate)- good solvent
- On morphology and polymer blends: polystyrene and polyethylene
- Synthesis and reactions of silyl ketene acetal-modified polysiloxanes. Preparation and preliminary dielectric characterization of some new polysiloxanes
- Isotropic scattering in H v light scattering from spherulites of polymers
- Flow-induced mixing and demixing in polymer blends
- Direct synthesis of aromatic polyamides using the imidazole-triphenylphosphite system
- Effects of molecular weight on the electrical properties of electrochemically synthesized poly ( 3- hexylthiophene )
- Phase segregation in blends of linear with branched polyethylene: the effect of varying the molecular weight of the linear polymer*
- Micro-Raman mapping of the transition region in the neck region of stretched poly(vinylidene fluoride)
- Effect of neutralizing cation type on the morphology and properties of model polyurethane ionomers
- Small-angle neutron diffraction study of block copolymer superstructure*
- Reactivity of substituted S-phenyl thiobenzoates as photoinitiators of radical polymerization
- Extended X-ray absorption fine structure spectroscopic analysis of cation local environment in model polyurethane ionomers
- Mixing and demixing of heterogeneous ethylene-octene copolymers: evidence for binodal melt demixing*
- The permeation of oxygen through drawn films of poly(ether ether ketone)
- On the origin of multiple dispersions in acrylic polymers
- Method of variation of contrast in neutron scattering studies of conformations of block copolymers forming a microdomain structure
- Curing and decomposition behaviour of vinyl ester resins
- Structural analysis of new basic multifunctional polymers by the comparison method
- Investigation of the solid-state polymerization of N-carboxy -amino acid anhydrides with reference to their crystal structu res*
- Structure of the skin and core of ultradrawn polyethylene films by vibrational spectroscopy
- 13C n.m.r, and X-ray diffraction studies of the morphology of alkanes and linear polyethylenes
- Study of a-axis orientation in drawn and annealed poly (ethylene terephthalate) film
- Some investigations and characterization of radiation-initiated graft polymerization onto fluorinated copolymer
- Investigation of interaction of polyester-polyurethanes and their zwitterionomers by solid-state nuclear magnetic resonance
- Effect of pre-drawn morphology induced by treatment with mixtures of dimethylformamide and water on drawing of poly (ethylene terephthalate) fibres
- Dielectric properties of polyamide-4,6
- A paramagnetic resonance study of the molecular motions of spin probes dissolved in poly(vinyl acetate)
- Studies on the temperature dependence of the elastic modulus of crystalline regions of polymers: 14. Poly (vinyl alcohol ) with different tacticities*
- Dielectric behaviour of carboxylato- and sulphonato-telechelic polydienes
- Coating thickness effect on the orientation and thermal expansion coefficient of polyimide films
- Molecular stress distribution and creep of high-modulus polyethylene fibres*
- Multitechnique surface analysis of poly (N-vinylpyridine-co-styrene) and poly (N-vinylimidazole-co-styrene) random copolymers
- Relationship between structure and mechanical properties in high-modulus poly(2,5(6 )-benzoxazole ) (ABPBO) fibres
- Degradation of semidilute polymer solutions in elongational flows*
- Compatibilizing effect of block copolymers in heterogeneous polystyrene/poly ( methyl methacrylate) blends
- Thermotropic polyesters: effect of m-phenylene disruptors on chain modulus
- Molecular packing and conformation of liquid crystalline polyesters with bulky side groups*
- Conversion dependent morphology predictions for composite emulsion polymers: 2. Artificial latices
- Volume change kinetics of temperature-sensitive poly(vinyl methyl ether) gel
- Chain extension and degradation in convergent flow
- Small-angle neutron scattering investigation of the response of model polyurethane ionomers to uniaxial deformation
- Morphology and mechanical properties of hydroxypropyl cellulose cast films crosslinked in solution
- Structure and rheology of gelatin gels: recent progress*
- Segmental motion of poly (p-hyd roxybutyrateco-/ -hydroxyvalerate) in chloroform solution studied by 13C n.m.r, relaxation
- Elastic scattering from asymmetric, polydisperse block copolymer systems in the disordered state
- A small-angle X-ray scattering study of the annealing and gelatinization of starch
- Solution-state carbon-13 nuclear magnetic resonance studies of polyaniline
- Polymer self-diffusion in Nal-poly (ethylene oxide) electrolytes
- Electromechanical coupling in a biopolymer gel*
- Addition of difluorocarbene to poly (1 -methyl-1 -phenyl-1 -sila-cis-pent-3- ene). Thermal stability and characterization of microstructures by 1H, 13C, 19F and 2 Si n.m.r, spectroscopy
- Hydrophobically end-capped polyethyleneoxide urethanes: 2. Modelling their association in water
- The relationship of C~ to the lateral surface free energy a: estimation of C~ for the melt from rate of crystallization data*
- Thermoreversible gelation and plasticization of polyacrylonitrile
- Thermodynamics of polymer/diluent systems for thermally induced phase separation: 1. Determination of equation of state parameters
- Mechanical properties of thermotropic liquid crystalline polyesters and polyarnides
- Effects of non-equilibrium polymer conformations on the adhesive strength of an interface
- Thermodynamics of polymer/diluent systems for thermally induced phase separation: 2. Solid-liquid phase separation systems
- Growth rate and morphology of isotactic polystyrene crystals in solution at high supercoolings
- Properties of a blend of poly(phenylene ether) with a liquid-crystalline polymer
- Thermodynamics of polymer/diluent systems for thermally induced phase separation: 3. Liquid-liquid phase separation systems
- Studies of phase separated copolymer blends using thermally stimulated currents and dielectric spectroscopy
- Block/segmented polymer: 2. Studies on the thermal and mechanical properties of poly ( amide ester )-ester copolymer
- Molecular behaviour of elastomeric materials under large deformation: 2. Rheological model of polymer networks
- Applications of Fourier transform infrared microspectroscopy to the analysis of microscopic orientation in liquid crystalline polymer sheets
- Evaluation of the heterogeneity in linear low-density polyethylene comonomer unit distribution by differential scanning calorimetry characterization of thermally treated samples
- A comparison of the phase-transfer-catalysed chlorinations of various polymethylstyrenes by hypochlorite
- Cure kinetics and mechanisms of a tetraglycidyl-4,4'-diaminodiphenylmethane/ diaminodiphenylsulphone epoxy resin using near i.r. spectroscopy
- Thermodynamic studies on Nylon-6/solvent systems by inverse gas chromatography at elevated temperatures
- Synthesis of microspheres with "hairy-ball" structures from poly(styrene-b-2-vinyl pyridine) diblock copolymers
- Physical ageing and creep in PVC
- Degree of phase separation in polyether-polyurethane copolymers with different chemical structures of hard segments
- Synthesis and properties of some new fluorine-containing polyimides
- Thermal properties and physical ageing of poly ( L-lactic acid )
- Phase transitions in narrow-molar-mass samples of side-chain liquid-crystalline polymers: molar-mass dependence
- Synthesis and properties of octafluorobenzidine bis-maleimide and of its reaction products with fluorinated diamines
- A review of the role of iron containing compounds in char forming/smoke suppressing reactions during the thermal decomposition of semi-rigid poly (vinyl chloride) formulations
- Rigorous experimental confirmation of a theoretical model for diffusion-limited oxidation
- 1993 рік
- On the mechanism of oxidative polymerization of aniline
- Morphology and properties of novel copoly(isocyanurate-urea)s formed by reaction injection moulding
- Some aspects of interlaminar toughening: reactively terminated thermoplastic particles in thermoset composites
- Chemical oxidative polymerization of aniline in aqueous medium without added acids
- Morphology, crystallization kinetics and melting behaviour of the blends of poly(ether ether ketone) with poly(ether sulfone with cardo side group)
- The processing of ternary LCP/LCP/thermoplastic blends
- Novel approach to the mechanism of the high-temperature formation of naphthalimides
- An n.m.r, study of absorbed water in polybenzimidazole
- Novel vinyl ether thermosetting resins
- Porous structure of electrosynthesized poly(p-phenylene) films characterized by the standard porosimetry technique
- The effect of a styrene-methyl methacrylate block copolymer on the morphological, rheological and mechanical properties of poly(2,6-dimethyl-l,4- phenylene ether) (PPE) and poly(hydroxy ether of bisphenol A) (Phenoxy) blends
- NEW-TPI thermoplastic polyimide: dielectric and dynamic mechanical relaxation
- Investigation of the interphase of a silane-finished glass fibre/vinylester resin using a microscopic F71.r. spectrometer
- Tensile drawing of poly(aryl ether ether ketone): 1. Birefringence, infra-red dichroism and shrinkage-stress measurements
- Poly(dipropargyl terephthalate): a candidate for thermosetting fibres*
- Analytical ultracentrifugation with the new Optima XL-A and its digital u.v./vis, detector: determination of molar mass distribution of polymers from sedimentation velocity
- Reactive processing of poly(ethylene 2,6- naphthalene dicarboxylate)/poly(ethylene terephthalate) blends
- The role of partial miscibility on the properties of blends of a polyetherimide and two liquid crystalline polymers
- Coordinative cross-linking of pyridyl- and bipyridyl-based hydrogel polymer membranes
- Influence of processing conditions on the anisotropy in injection-moulded thermotropic LCPs
- Simultaneous differential scanning calorimetry and near-infra-red analysis of the curing of tetraglycidyldiaminodiphenylmethane with diaminodiphenylsulphone
- Thermal ageing of PMR15 polyimide matrix
- Thermal behaviour of polypropylene fractions: 1. Influence of tacticity and molecular weight on crystallization and melting behaviour
- Graft copolymers of rigid-rod polymers as single-component molecular composites
- Analysis of orientation mechanism of crystallites in polyethylene cylindrical rod under tension-torsion combined stress
- Thermal behaviour of polypropylene fractions: 2. The multiple melting peaks
- Influence of molecular structure on processing conditions and mechanical properties of graft rigid-rod copolymers*
- Intramolecular excimers and energy migration in polyesters with 2,6-naphthalene dicarboxylic acid units separated by spacers of 1-4 ethylene oxide units
- Crystallization phenomena in bacterial poly[ ( R)-3- hyd roxybutyrate]: 2. Embrittlement and rejuvenation
- Simulating the interface of carbon fibres with molten polymers and reactive monomers
- Electronic structure of strained polymers: 3. Scaled Hessians for polyethylene
- Chromatographic investigations of macromolecules in the critical range of liquid chromatography: 3. Analysis of polymer blends
- Fourier transform infra-red spectroscopic study of thermal degradation in poly(ether ether ketone)-carbon composites
- X-ray diffraction study of jute fibres treated with NaOH and liquid anhydrous ammonia
- Chromatographic investigations of macromolecules in the critical range of liquid chromatography: 4. Analysis of poly(styrene-b-methyl methacrylate)
- Solubility, diffusion and swelling of fluids in thermoplastic resin systems*
- Microstructural analysis of polypropylenes produced with heterogeneous Ziegler-Natta catalysts
- Molecular motions in poly(vinyl acetate) and in poly(vinyl acetate)/p-nitroaniline mixtures
- Alpha-T-T and T-T-alpha-T diagrams as a new element in comprehensive modelling of thermoset processing
- Nuclear magnetic resonance lineshape studies of interpenetrating polymer networks
- Ultrasonic degradation of polymer solutions: 2. The effect of temperature, ultrasound intensity and dissolved gases on polystyrene in toluene
- The effect of compatibilization on blends of polypropylene with a liquid-crystalline polymer*
- Intermolecular cross-polarization nuclear magnetic resonance studies of the miscibility of poly(ethylene naphthalene d ica rboxylate)/poly(ethylene terephthalate) blends
- Correlation between the combinatory entropy of polymer and ideal liquid solutions: 2. Ternary polymer-polymer-solvent and binary polymer-polymer systems
- Novel processing and cure of epoxy resin systems*
- Effect of the processing temperature on the interaction between plasticizer and poly(vinyl chloride) as studied by solid state n.m.r, spectroscopy
- Correlation between the combinatory entropy of polymer and ideal liquid solutions: 3. Derivation of equation for local concentration
- Preparation of submicrometre polyimide particles by precipitation from solution
- A high resolution solid-state n.m.r, and d.s.c, study of miscibility and crystallization behaviour of poly(vinyl alcohol)/poly(N-vinyl-2-pyrrolidone) blends
- Surface enrichment in PS/PVME blends: 2. The effect of specific interactions in the bulk mixture
- Polymeric materials for composite matrices in biological environments
- The effect of blending high-density and linear low-density polyethylenes on slow crack growth
- Polyimines from terephthalaldehyde and aliphatic diamines: 5. Copolymers with even-even numbers of methylene units in the flexible spacer
- Processing and characterization of polymer-based composites for electronic applications: polymer/ceramic composite grain boundary capacitors*
- Thermal behaviour of poly (phenylene sulfide) and its derivatives
- Photochemistry in polymer solids: 12. Effects of main-chain structures and formation of hydrogen bonds on photoisomerization of azobenzene in various polymer films
- Crystallization behaviour and morphological features of LARC-CPI
- Dynamic viscoelastic properties of carboxymethylcellulose during isothermal water sorption
- Synthesis and characterization of poly(dichlorophenylene oxide)s based on the electro-oxidation of bis(2,4,6- t r i c h I o ro p h e n oxo ) b is (pyri d i ne )co p pe r (I I ) complex
- Thiophene-based poly(arylene ether ketone)s: 2. Thermal and mechanical properties of amorphous systems using bis(p-fluorobenzoyl)aryl monomers*
- On the use of time-temperature superposition in multicomponent/ multiphase polymer systems
- Synthesis and characterization of alkyl-substituted poly(thiophene-2,5- diylvinylene)s
- Synthesis and structure-property relationships of bismaleimides containing oxyalkylene linkages
- Phase diagrams of quasi-binary polymer solutions and blends
- Compatibilizing effect of polyarylate nylon 6 block copolymers on polyarylate/nylon 6 blends: 1. Synthesis of polyarylate-nylon 6 block copolymer and its miscibility in binary blends with polyarylate or nylon 6
- Synthesis of soluble polyimides and functionalized imide oligomers via solution imidization of aromatic diester-diacids and aromatic diamines
- Effects of chain structure on the melting characteristics of poly(vinyl fluoride)
- High pressure crystallization of poly(ethylene oxide) and poly(methyl methacrylate) mixture
- Fine polymeric powders from poly(arylene ether ketone)s
- The effect of backbone structure on the cloud point behaviour of polyethyleneethane and polyethylene-propane mixtures
- Crystallization behaviour of a microphase-separated diblock copolymer
- Processable heat-resistant resins based on novel monomers containing o-phenylene rings: 2. Ordered benzoxazole-and benzthiazole-imide copolymers*
- A possible glass transition for poly(L-methionine) and poly(L-serine)
- Relation between unusual solubility of salts in poly(ethylene oxide) oligomers and complex formation
- Toughening procedures, processing and performance of bismaleimide-carbon fibre composites
- Structure of solution-grown trans-l,4- polyisoprene crystals: 1. Determination of stem length and fold surface structure by ozonolysis-g.p.c, measurement
- Polyacrylates containing hexafluoroisopropoxy pendant functions
- Synthesis and properties of imide-aryl ether 1,2,4-triazole random copolymers*
- Crosslinking kinetics in emulsion copolymerization of methyl methacrylate/ethylene glycol dimethacrylate
- Diffraction measurements of crystalline morphology in a thermotropic random copolymer
- Semicrystalline and amorphous fluorine-containing polyimides
- A new kinetic description of the rheo-optical behaviour of polymer melts: 1. The predictions of the kinetic orientation model
- Dielectric relaxation of isotactic polystyrene above the glass transition temperature
- Synthesis and properties of poly(arylene ether benzimidazole)s*
- Crosslinking of binary blends of branched polyethylene and poly(1,2-butadiene): 1. Molecular structure and kinetics
- Electrically conducting copolymers from 3-octylthiophene and 3-methylthiophene
- Synthesis of 4,4'-isopropylidene diphenol (bisphenol A) based polybenzoxazoles via an acid-catalysed solution cyclization process*
- The effect of stirring on the diffusion of small molecules from a polymer matrix into a solution
- Phase morphology of polymer blends: 2. SEM observation by secondary and backscattered electrons from microtomed and stained surface
- Effect of thermoplastic modifier variables on toughening a bismaleimide matrix resin for high-performance composite materials
- Structure and gas permeability of siloxane-imide block copolymer membranes: 1. Effect of siloxane content
- Morphological study of poly(phenylacetylene) films, prepared with Rh(I) catalysts, from scanning microscopy investigations
- Synthesis and characterization of novel toughened thermosets derived from pendent amines on the backbone of poly(arylene ether sulphone)s*
- Viscoelastic behaviour at the thermal sol-gel transition of gelatin
- Characterization of polypyrrole-fibre composites by time-of-flight secondary ion mass spectrometry and vibrational spectroscopy
- Fabrication of PEEK/carbon fibre composites by aqueous suspension prepregging
- Inorganic environment derived from the sol-gel route does not improve the thermal or oxidative stability of 2,4-dinitroaniline in coatings
- A solid-state n.m.r, study of microphase structure and segmental dynamics of poly(styrene-b-methylphenylsiloxane) diblock copolymers
- Interlaminar crack growth in third-generation thermoset prepreg systems*
- The regular star polymer in the theta state
- Organotransition-metal complexes as additives for epoxy resins: 1. Their effects on toughness and morphology of epoxy resins
- Apparent reversal of physical ageing in amorphous glassy polymers by electron beam irradiation
- Chain length regulators in the synthesis of poly(urethane ureas) in solution
- Internal stress in a cured epoxy resin system
- Incorporation of branches into the crystal lattice during the solidification of linear low density polyethylene
- Chemical modification of pullulan: 1. Periodate oxidation
- Curing of unsaturated polyester resins. Effects of temperature and initiator: 1. Low temperature reactions
- Diffusion and sorption of organic liquids through polymer membranes: 10. Polyurethane, nitrile-butadiene rubber and epichlorohydrin versus aliphatic alcohols (C1--C5)
- Chemical modification of pullulan: 2. Chloroformate activation
- Deformation of thin films of poly(ether ether ketone)
- Self-diffusion of water in gelatin gels: 1. Macroscopic measurements by tracer technique
- The oxidation of hydroquinone catalysed by poly(4-vinyl pyridine-co-N-vinyl pyrrolidone)-Cu(ll) complexes: effect of the copolymer composition distribution on the catalytic activity
- An approach towards understanding mode II failure of poly (methyl methacrylate)
- Thermoreversible gelation of poly(vinylidene fluoride) in -butyrolactone solution
- Asymmetric induction copolymerization of chiral N-(R- -methylbenzyl)maleimide with achiral N- (substituted)maleimide
- Mechanical properties of biaxially drawn films of ultra-high molecular weight polyethylene dried gels
- Statistical thermodynamics of polydisperse polymers
- Polymer-metal complexes of amino functionalized divinylbenzene-crosslinked polyacrylamides
- Curing of glycidyl ethers with aromatic amines: model studies on the effects of tertiary amines as accelerators
- Interpreting the copolymerization of styrene with maleic anhydride and with methyl methacrylate in terms of the bootstrap model
- Surface properties of films containing poly(vinyl alcohol) having an n-alkylthio group at one end
- A comparison of the molecular weights of polyaniline samples obtained from gel permeation chromatography and solid state lSN n.m.r, spectroscopy
- Cationic conductivity and relaxation processes in solid polymer electrolytes with lithium perfluoroalkyl sulfonate or sulfonato end-capped poly(ethylene oxide)
- Lattice expansion during polyisoprene crystallization from blends
- Swelling study of perfluorosulphonated ionomer membranes
- On the structure of polypyrrole: polypyrroles with dipyrrin-1 (10H)-one end groups
- Morphology in PEEK-carbon fibre composites observed in transmission electron microscopy
- Swelling and deswelling of polyamide 11 with formic acid
- Synthesis and characterization of poly( oxy-2,6-n a p ht ha len ed iylca rbo nyl ) whiskers from 2-acetoxy-6-naphthoic acid
- Gas permeation in plasma-polymerized vinyl bromide
- A study of the glass transition of amylopectin-sugar mixtures
- Metalliferous epoxy chelate polymers: 1. Synthesis and properties
- 13C n.m.r, observation of poly(L-lactide) in the narrow channels of its inclusion compound with urea
- Intermolecular interactions in binary multiblock copolymer blends
- Metalliferous epoxy chelate polymers: 2. Influence of structural fragments on properties
- Specific volume phase transition of 2-acryloyloxyethyl acid phosphate gels in various solvent mixtures at a particular transition point
- Phase transitions in polydisperse polymer melts
- Metalliferous epoxy chelate polymers: 3. Influence of structural fragments on the properties of similar matrices
- Influence of the precipitation method on the magnetic properties of a polyradical with conjugation in the backbone and nitronyl nitroxide side groups
- Solution behaviour of ,o9-(dimethylamino) polymers quaternized with alkyl iodides
- Two-dimensional undulation pattern on free surface of polymer film cast from solution
- Electropolymerization of 4-(3-pyrrolyl)-4-oxobutyric acid by in situ potentiodynamic pre-reduction/oxidation
- Contact angle of organic liquids on poly(2-ethylhexyl acrylate-co-acrylic acid
- Increased dielectric breakdown strengths of melt-extruded polypropylene films
- Characterization of orientation of one-way and two-way drawn isotactic polypropylene films
- Transesterification reactions between a polyarylate and poly (1,4-butylene terephthalate): identification of interchange units via model compounds
- Electroactive polymeric thin film based on polypyrrole incorporating metallophthalocyanine polymer
- Solid-state therrnochromic transition in poly (2-methoxyphenylene vinylene)
- Preparation and characterization of water soluble and crosslinkable cellulose acrylate
- Direct determination of stem length for chain-folded lamellar polymer crystals grown from solution: ozonolysis-g.p.c, measurements
- Thermoluminescence study of the crystal modifications of polypropylene fibres
- Synthesis and characterization of a new poly(methacrylamide) bearing side groups of biomedical interest
- Supercritical fluids: puissant media for the modification of polymers and biopolymers
- Crystal size distribution in pure Nistari silk fibres
- Electrosynthesis and characterization of poly(1,4-phenylene) films with improved electroactivity
- Unique property of cyanine dyes on charged poly(L-lysine)
- Conclusions drawn from a study of cellulose nitration in technical mixed acids by X-ray photoelectron spectroscopy and 13C nuclear magnetic resonance
- Synthesis of telechelic methyl methacrylate and styrene oligomers with fluorophenyl ketone end groups by the ozonolysis of copolymers containing 4-fluorophenyl butadiene units
- Orientation effects in injection-moulded rubber materials studied by X-ray scattering
- SEM image analysis to characterize the shape of catalyst and polyethylene prepolymer particles in olefinic polymerization
- Synthesis of low-molecular-weight telechelic polyisobutylene
- Sulphonation of poly(phenylene ether sulphone)s containing hydroquinone residues
- Liquid crystalline main chain polymers with a poly(p-phenylene terephthalate) backbone: 3. Drawing, structure development and ultimate mechanical properties of films of the polyester with dodecyloxy side chains
- Synthesis and characterization of liquid crystal polymers with oligosiloxane spacers
- Transmission electron microscopic investigation of the morphology of a poly ( hyd r o xybe n zoate- cohydroxynaphthoate) liquid crystal polymer
- Liquid crystalline main chain polymers with a poly(p-phenylene terephthalate) backbone: 4. X-ray diffraction of the polyester with dodecyloxy side chains
- Crack initiation and fibre creep in polyethylene
- Apparent reversal of physical ageing in amorphous glassy polymers by electron beam irradiation
- Determination of the intrinsic stress/strain equation of thin polymer films from stretching experiments under plane-strain tension
- Long wavelength photoinitiated cationic polymerization using diphenyliodonium salt and catena-poly (phenyl-4-phenylphenylsilicon
- The percolation limits for two-phase blends of PMMA and copolymers of styrene and MMA
- Processing/property relationships of a therrnotropic copolyester: 1. Effect of capillary die aspect ratio
- Atomic force microscopy of polymer crystals: 4. Imaging of oriented isotactic polypropylene with molecular resolution
- Analysis of photooxidation of polymer materials by photoacoustic Fourier transform infra-red spectroscopy
- Processing/property relationships of a thermotropic copolyester: 2. Correlations between tensile properties and orientation
- Study of thermal degradation of polybutadiene in inert atmosphere: 1. Evidence of temperature and time of heating in i.r. and n.m.r. spectra
- Amide I absorption band: description of the urethane group association scheme in polyether urethane elastomers
- Polyurethane anionorners. I. Structure--property relationships
- Study of thermal degradation of polybutadiene in inert atmosphere: 2. Characterization of thermal crosslinking in polybutadiene by high resolution solid state 13C and 1H magic angle spinning n.m.r, spectroscopy
- Preparation and properties of absorbable fibres from L-lactide copolymers
- Polyurethane anionomers. II. Phase inversion and its effect on physical properties
- Orientational mobility in uniaxially deformed polymer chains: a Brownian dynamics simulation study
- Imide-containing phthalonitrile resin
- Effect of molecular weight on rolled high density polyethylene: 1. Structure, morphology and anisotropic mechanical behaviour
- Critical energy for crack initiation in rubber-toughened poly ( methyl methacrylate)
- Drawability of poly(vinyl alcohol) films prepared by gelation/crystallization from semidilute solutions
- Effect of molecular weight on rolled high density polyethylene: 2. Fracture
- A time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy investigation of the structure of plasma polymers prepared from the methacrylate series of monomers
- Transition broadening and WLF relationship in polyurethane/poly(methyl methacrylate) interpenetrating polymer networks
- Syndiotactic polystyrene-based blends: crystallization and phase structure
- Light scattering from dilute diblock copolymers in semidilute homopolymer solutions
- Isotactic polypropylene/hyd rogenated oligo(cyclopentadiene) blends: phase diagram and dynamic-mechanical behaviour of extruded isotropic films
- Interaction of poly(oxyethylene) with water as a function of molar mass
- Segmented copolymers with polyesteramide units of uniform length: structure analysis
- Morphological origin of toughness in polyethylene-nylon-6 blends
- A new time-temperature-transformation cure diagram for thermoset/thermoplastic blend: tetrafunctional epoxy/poly(ether sulfone)
- Crystal structure of poly(p-phenylene sulfide) by nuclear magnetic resonance spectroscopy
- Composite films of nylon-6/polypyrrole: thermal behaviour, mechanical properties and electrical conduction
- Size and mass of branched epoxy resins
- Nuclear magnetic resonance investigation of the microdynamics of vinyl chloride-vinylidene chloride copolymers
- Crystallization and thermal behaviour of isotactic poly (1 -butene) mixed with hydrogenated oligo (cyclopentadiene)
- Polymer-supported Pd(.) Wacker-type catalysts: 1. Synthesis and characterization of the catalysts
- Grafting of polystyrene on to poly(vinyl alcohol) (PVA) by a PVA-CuCI2 complex initiating system in an aqueous medium
- Crystallization and thermal behaviour of poly ( D ( -- ) 3-hydroxybutyrate) / poly (epichlorohydrin) blends
- Configurational-conformational statistics of atactic polypropylene
- Analysis of fatigue crack growth in a rubber-toughened epoxy resin: effect of temperature and stress ratio
- Transmission electron microscopic investigation of the morphology of a poly ( hyd r o xybe n zoate- cohydroxynaphthoate) liquid crystal polymer
- Modified poly(ether sulfone)/poly(ether ether sulfone) polymers: approaches to pendent carboxyl groups
- Thickness effects in split Hopkinson pressure bar tests
- Photosensitized cationic polymerization using N-ethoxy-2-methylpyridinium hexafluorophosphate
- Hydrophobic and hydrophilic interpenetrating polymer networks composed of polystyrene and poly(2-hydroxyethyl methacrylate): 1. PS-PHEMA sequential IPNs synthesized in the presence of a common solvent
- Processable conducting polymers obtained via protonation of polyaniline with phosphoric acid esters
- Fluorescence depolarization and quenching studies of acenaphthalene-labelled poly(acrylamide) in water
- High-solids-content seeded semicontinuous emulsion terpolymerization of styrene, 2-ethylhexyl acrylate and methacrylic acid
- The dynamic mechanical behaviour of carbon black filled EPDM parallel and series models
- Complexation and blending of some water-soluble polymers: solid-state nuclear magnetic resonance relaxation studies
- Synthesis and characterization of epoxy resins containing transition metals
- Dynamic mechanical behaviour of poly(benzyl methacrylate) and poly(cyclohexylmethyl methacrylate)
- The use of FTi.r.-a.t.r. spectroscopy to characterize penetrant diffusion in polymers
- Isomeric poly(ether imide)s: synthesis, thermal properties and permeabilities
- A constitutive model of polymer materials including chemical ageing and mechanical damage and its experimental verification
- Molecular orientation in uniaxially drawn poly(aryl ether ether ketone): 2. Infra-red spectroscopic study
- Synthesis and characterization of anionic 2,3-epoxypropyl methacrylate polymers and of related random and block copolymers with methyl methacrylate
- Physical ageing of amorphous and semicrystal li ne poly(ethylene terephthalate)
- Molecular orientation in uniaxially drawn poly(aryl ether ether ketone): 2. Infra-red spectroscopic study
- Synthesis and basic characterization of a macromolecular dibromoamine: N, N-d i bromo- poly(styrene-codivinylbenzene) sulfonamide
- The origin of the fl transition and its influence on physical ageing
- Characterization of sol-gel processed poly(p-phenylenevinylene) silica and V205 composites using waveguide Raman, Raman and FTi.r. spectroscopy
- Rigid-rod polyelectrolytes: carboxylated poly(para-phenylene)s via a novel precursor route
- Melting and crystallization behaviour of poly(vinylidene fluoride) samples in its blends with some polyacrylates, poly(vinyl esters) and poly(aryl ether ether ketone)
- An infra-red dichroism investigation of segmental orientation in dry and swollen poly(dimethylsiloxane) networks
- Osmotic and scattering properties of polymer gels containing free chains
- Molecular transport of methyl- and methoxy-substituted benzenes into bromobutyl rubber, chlorosulfonated polyethylene and epichlorohydrin membranes
- Introduction of colloidal silver into poly(2-vinyl pyridine) microdomains of microphase separated poly(styrene-b-2-vinyl pyridine) film: 2. Concentration effect
- Phase behaviour of blends of poly(methyl methacrylate) with poly(styrene-co-methacrylonitrile)
- Studies on the kinetics of inverse emulsion polymerization of acrylamide using a-ketoglutaric acid as photoinitiator
- Introduction of colloidal silver into poly(2- vinyl pyridine) microdomains of microphase separated poly(styrene-b-2- vinyl pyridine) film: 3. Poly(2-vinyl pyridine) spherical microdomain
- Synthesis and characterization of pendantly amine functionalized poly(arylene ether sulfone)
- Single-phase and multiple-phase thermoplastic/thermoset polyblends: 1. Kinetics and mechanisms of phenoxy/epoxy blends
- Fibres from polypropylene and liquid crystal polymer (LCP) blends: 1. Effect of LCP concentration
- Conductivity, thermal stability, dielectric and morphological characteristics of poly(N-vinylcarbazole) prepared in aqueous suspension
- Anomalous sorption of binary solvents in glassy polymers: interpretation of solute release at constant rates
- Fibres from polypropylene and liquid crystal polymer blends: 2. Effect of extrusion and drawing conditions
- Curable electrically conductive resins with polyaniline fillers
- Peculiarities of the glass transition temperature of binary polymeric systems: entropic and enthalpic treatments
- Influence of copolymer composition on phase structure and crystallization of poly(ethylene oxide) /poly(et hyl en e- co-vi nyl acetate) blends
- Reversible changes in the solid state of HBA/HNA liquid crystalline copolyesters studied by X-ray diffraction
- Interpolymer complexes in the poly(styreneco- allyl alcohol)/poly(N-methyI-Nvinylacetamide) system
- Stress-relaxation due to crack-craze interaction
- Electrocoating of carbon fibres with polymers: 3. Electrocopolymerization of polyfunctional monomers
- Polyurethane ionomers containing phosphate groups
- The double network, a model describing filled elastomers
- Study of irradiated polymers using double-modulation electron spin resonance and size exclusion chromatography
- Segmented block copolymers based on poly(butylene terephthalate) and telechelic polyesters and polyamides of dimerized fatty acids
- Vibration welding of ABS to itself and to polycarbonate, poly(butylene terephthalate), poly(ether imide) and modified poly(phenylene oxide)
- Fourier transform infra-red spectroscopy on the thermo-oxidative degradation of polybenzimidazole and of a polybenzimidazole / polyetherimide blend
- Synthesis and characterization of linear and three-arm star radial poly(styrene-bisobutylene- b-styrene) block copolymers using blocked dicumyl chloride or tricumyl chloride/TiCli/pyridine initiating system
- Crystallization and melting behaviour of segmented thermotropic polymers: 2. A poly(ether ester) of low isotropization temperature
- Surface free energy of the chain-folding crystal faces of ethylene-butene random copolymers
- Formation of surface-modified polypyrrole films by electropolymerization on non-conducting solid surfaces
- Selective transport of amino acids across a crosslinked poly(L-glutamic acid) membrane
- Influence of molecular mass, thermal treatment and nucleating agent on structure and fracture toughness of isotactic polypropylene
- Electrochemical investigations of a substituted oxidation stable polypyrrole
- Phase separation and polymer interactions in aqueous poly(vinyl alcohol)/ hydroxypropyl methylcellulose blends
- Deformation and toughness of polymeric systems: 2. Influence of entanglement density
- Anionic polymerization of t-butyl methacrylate using a new type of bifunctional initiator
- Dynamic mechanical and microcalorimetric studies on the phase structure in blends of two multiblock copolymers: 1. Poly (ether-ester) and poly ( (ether-carbonate)-urethane ) blends
- Determination of the glass transition temperature of poly(cyclohexyl acrylate) from oxygen permeability measurements
- Styrene-terminated poly(vinyl alcohol) macromonomers: 2. Free-radical (co)polymerization studies and application to the functionalization of latex particles
- Ellipsometric studies on immiscible polymer-polymer interfaces
- Liquid-liquid phase segregation in blends of a linear polyethylene with a series of octene copolymers of differing branch content
- Segmented copolymers with poly(ester amide) units of uniform length: synthesis
- Coil dimensions of poly(methyl acrylate) in the cosolvent medium of carbon tetrachloride and methanol
- A qualitative scheme for the liquid phase separation in blends of homopolymers with their branched copolymers
- Synthesis of bioabsorbable networks from methacrylate-endcapped polyesters
- Conformations of polyurethane cationomers in organic solvents and in organic solvent/water mixtures
- Statistical thermodynamics of polydisperse polymer mixtures
- rod polymer from 2,5- diaminoterephthalamide (DATA) and terephthalic acid; facile synthesis of DATA
- Monte Carlo study of the collapse transition of flexible and semiflexible star-branched polymers
- Rheology of star-linear polymer blends: molecular tube models
- Synthesis, characterization and osmosis performance of poly(amide-sulfonamide)s
- Reactions proceeding via the reactive intermediate =-vinyl-p-xylylene. Contrasting orientations in the formation of cyclic dimers and polymer
- Physicochemical characterization of polypropylene films grafted by poly(acrylic acid). 1
- NEW-TPI thermoplastic polyimide: thermal analysis and small-angle X-ray scattering
- Reactions proceeding via the reactive intermediate =-phenyl-p-xylylene. Contrasting orientations in the formation of cyclic trimers and polymer
- Synthesis and infra-red spectroscopic characterization of random copolymers of 4-vinylphenol with n-alkyl methacrylates
- Effects of morphology on mechanical properties of a SBS triblock copolymer
- A new class of main-chain liquid crystalline polymers based on an unsymmetrically disubstituted cyanostilbene
- Synthesis and characterization of poly(oxy-1,4- phenyleneoxyca rbony1-1,4- phenyleneoxypolymethylene)s
- Reactive blending of poly(styrene-co-maleic anhydride) with poly(phenylene oxide) by addition of a-amino-polystyrene
- Synthesis and characterization of poly(2-methoxycyanurate) of bisphenoI-F
- Synthesis and characterization of novel cyclot ri ph osp hazene-conta i n i ng poly (ether imide) s
- Modelling of a semibatch polypropylene slurry reactor
- Preparation of a novel oxalic-aromatic copolyamide-hydrazide
- Preparation and properties of poly(dimethylsiloxane-2-ethyl-2-oxazoline) diblock copolymers
- Prediction and calculation of the shear creep behaviour of amorphous polymers under progressing physical ageing
- Electron microscopic observation of spinodal decomposition in blends of tetramethyl polycarbonate and polystyrene
- Interfacial activity of polycarbonate/polystyrene graft copolyrners in polycarbonate/polystyrene blends
- Izod impact strength of polystyrene-based blends containing low molecular weight polybutadiene
- In situ X-ray scattering study of anisotropic solutions of hydroxypropylcellulose subjected to shear flow
- Grafting 1,2-polybutadiene onto porous silica
- The effect of fillers on the vibration welding of poly(butylene terephthalate)*
- The use of ultrasound and a thermolabile radical initiator in the polymerization of acrylate monomers
- Cyclic polyesters: 1. Preparation by a new synthetic method, using polymer-supported reagents
- The development of structure and mechanical properties in poly(ethylene terephthalate) fibres during heat treatment under stress
- Effects of repeat unit structure on the toughness of poly(aryl ether sulphone)s
- Cyclic polyesters: 2. Topological trapping experiments and theoretical studies
- The toughening of polyamide-6 by brominated poly(isobutylene-co-pmethylstyrene): fracture and toughening mechanisms
- Confocal laser scanning microscopy: a new method for determination of the morphology of polymer blends
- Polymerization of methyl methacrylate in ternary oil-in-water microemulsions
- Aromatic and heteroatomic polyesters: 2. The effect of a range of disrupting units on polyesters based on phenylene and naphthylene groups
- Alternative concept of the transition emeraldine basHmeraldine salt
- Efficient polymerization of a semifluorinated liquid crystalline methacrylate
- Cure kinetics of elementary reactions of a diglycidyl ether of bisphenol A/ diaminodiphenylsulfone epoxy resin: 2. Conversion versus time
- Synthesis and purification of a poly(ethylene oxide)-poly(7-benzyl- L-glutamate) diblock copolymer bearing tyrosine units at the block junction
- Thermotropic polyesters: synthesis and properties of t-butyl-substituted poly(4-oxybenzoate)s
- Free-radical crosslinking copolymerization of styrene/unsaturated polyester resins: 1. Phase separation and microgel formation
- Synthesis of aromatic polyphosphonate' low temperature solution polycondensation of 4,4'-sulphonyldiphenol with phenoxy dichlorophosphate
- Synthesis of polybenzimidazoles via aromatic nucleophilic substitution reactions of self-polymerizable (A-B) monomers
- Free-radical crosslinking copolymerization of styrene/unsaturated polyester resins: 2. Electron spin resonance study
- Conductivity studies of new polymer electrolytes based on the poly(ethylene glycol)/sodium iodide system
- Soluble polyelectrolytes based on copolymers of styrene with benzonitrile
- Free-radical crosslinking copolymerization of styrene/unsaturated polyester resins: 3. Kinetics-gelation mechanism
- The photo-Fries rearrangement in a side-chain liquid-crystalline polymer
- Microwave welding of thermoplastics using inherently conducting polymers
- Solvent and isomer effects on the imidization of pyromellitic dianhydride-oxydianiline-based poly(amic ethyl ester)s*
- The crystal structure of poly(ether ketone) copolyrners
- A pseudo-spin model for poly(vinylidene fluoride-trifluoroethylene) copolymers
- Stimuli-responsive polymers: chemical induced reversible phase separation of an aqueous solution of poly(N-isopropylacrylamide) with pendent crown ether groups
- Positron annihilation and polymerization of epoxy resins
- Characterization of dispersive and acid-base properties of crosslinked polymers by inverse gas chromatography
- Liquid crystalline polymorphism in a new class of semiflexible polyesters containing a 2-phenyl-benzoxazole group
- Morphological observations of nascent poly(p-oxybenzoate)
- Chain conformations of liquid-crystalline polymers
- The side-group reorientations of polypropylene and poly(methyl acrylate) during conformational state transition
- Po lyca rbo n ate / ac ryl o n it r i I e- b uta d i en estyrene blends: 1. Complementary etching techniques f o r morphology observations
- On the transition to the power law dependence of stiff and flexible macromolecules
- Influence of covalently bound phosphorus-containing groups on the flammability of poly(vinyl alcohol), poly(ethylene-co-vinyl alcohol) and low-density polyethylene
- E.s.r. study on permeation of oxygen in crosslinked polymers
- Liquid liquid phase separation in polypropylene homopolymer/polypropylene copolymer melts
- Cerium(IV)-sorbose-initiated polymerization of acrylamide and methacrylamide
- Fourier transform infra-red spectroscopic studies of gelation and crystallization of polystyrene/carbon disulfide solutions
- Estimated blend viscosities by a simple and workable model
- Metal complexes of poly(2-acetamidoacrylic acid)
- Development of texture in poly(ethylene terephthalate) by plane-strain compression
- Sequence distribution and stereoregularity in methyl methacrylate-methyl acrylate copolymers at high conversions
- 1H spin diffusion coefficients of highly mobile polymers
- Effects of nitrogen tetroxide exposure on DuPont Kalrez 1045
- 13C n.m.r, determination of the isotacticity of the propylene homopolymer part in ethylene-propylene block copolymers
- Free volume structure and spin probe dynamics in solid polymers
- Plasticization of poly (methyl methacrylate) (PMMA) networks by supercritical carbon dioxide
- Liquid-crystalline solutions of electrically conducting polyaniline
- Internal structure of Kevlar ® fibres by atomic force microscopy
- Influence of stress-induced crystallization on the dimensional stability of monoaxially drawn poly(ethylene terephthalate)
- Molecular organization of lignin during carbonization
- Observation of two-stage crystallization of poly(ether ether ketone) by thermal mechanical analysis
- Effect of precursor history on residual stress and relaxation behaviour of high temperature polyimides
- The effect of molecular weight and crystallinity on the conductivity of a conducting polymer
- Measurement of solute diffusion in polymers by inverse gas chromatography using fused-silica open tubular columns
- Effect of solvent on thermal degradation of poly(p-methylstyrene)
- Orientation of the lamellar crystals in polyamide 12
- Formation of block copolymer micelles: a sedimentation study
- Solvent effect on thermal degradation of polystyrene and poly-=-methylstyrene
- Shear-induced crystallization of isotactic polypropylene melts: isothermal WAXS experiments with synchrotron radiation
- Poly(2,5-thienylene-l,2-dimethoxy-ethenylene): synthesis and characterization
- Remarks on smoothed-density theories for flexible chains with three-segment interactions
- A study of interphase in model composites via low temperature thermo stimulated creep spectroscopy
- A multitechnique investigation of sodium-doped poly(p-phenylene vinylene)
- Correlation between the combinatory entropy of polymer and ideal liquid solutions
- Interactions in metal-polymer-metal interfaces
- Chemiluminescence imaging of polymer materials under thermal oxidation and stress
- Miscibility in blends of sulfonylated poly(2,6-dimethyl-1,4-phenylene oxide) (SPPO) with homopolymers of halogen-substituted styrene derivatives
- Raman spectroscopic characterization of microstructure of polybutadienes during hydrogenation and hydrobromination reactions
- Structure and morphology of sol-gel prepared polymer-ceramic composite thin films
- Miscibility and phase diagrams of poly ( phenyl acrylate) and poly (styrene-coacrylonitrile) blends
- The deformation behaviour of thin films of poly( sty re n e-a c ry I o n it r i le ) / po ly ( styrenemaleic anhydride) blends
- Morphology and rheological behaviour of mixtures of poly(styrene-b-ethylene-cobutylene- styrene) block copolymer and poly(2,6-dimethyl-1,4-phenylene ether)*
- Effect of block copolymers on the interfacial tension between two "immiscible" homopolymers
- The role of microstructure during fatigue crack growth in poly(aryl ether ether ketone) (PEEK)
- Scaling analyses of polyacrylamide gels at swelling equilibrium in water/acetone mixtures by small-angle X-ray scattering
- Thermodynamics of poly(ethylene oxide)- poly (vinyl acetate) blends
- The use of differential scanning calorimetry to study the reprocessing of poly(vinyl chloride)
- 2H n.m.r, study of high pressure effects on the molecular dynamics in polystyrene: 1. Main chain motion
- Therrnotropic polyesters: synthesis and properties of highly disordered copolyrners
- High-performance aromatic polyimide fibres: 2. Thermal mechanical and dynamic properties
- 2H n.m.r, study of high pressure effects on the molecular dynamics in polystyrene: 2. Phenyl group motion
- Effects of simple substitutions on conformational and electronic properties of rigid rod polymer models
- Cure of unsaturated polyester resins: 1. Heat of copolymerization and glass transition temperature
- 2H n.m.r, study of high pressure effects on the molecular dynamics in polystyrene: 3. Spin relaxation studies
- Polymer-supported redox catalysts for polymerization
- Thermal shock test of integrated circuit packages sealed with epoxy moulding compounds filled with spherical silica particles
- Conductive properties of poly(4-vinylpyridine)- poly(dimethylsiloxane) block copolymers doped with tetracyanoquinodimethane
- Metathesis copolymerization of norbornene with phenylacetylene and its ringsubstituted derivatives catalysed by WCI6: 1. Product characterization
- Influence of copolymer composition on the crystallization in PCL/SAN blends
- Processable conductive polypyrrole/poly(alkyl methacrylate) composites prepared by an emulsion pathway
- Poly(L-lactide) crosslinked with spi ro- bis-d i met hylene-ca rbonate
- The fractionated crystallization phenomenon in poly(3-hydroxybutyrate)/ poly(ethylene oxide) blends
- Study of orientation in polystyrene/ poly(vinyl methyl ether) relative to the temperature of phase separation
- Synthesis and polymerization of N-[4- (cholesteroxyca rbo nyl )phenyl ] malei mide
- Phase behaviour of poly(ethylene oxide)/poly(methyl methacrylate) blends containing alkali metal salts
- Microfibrillar reinforced composite from drawn poly(ethylene terephthalate) / nylon-6 blend
- Synthesis of poly(ether ketone) by FriedeI-Crafts acylation: effects of reaction conditions
- Partial phase diagrams of poly(p-phenylene terephthalamide) copolymers in sulfuric acid
- Comparison of the effectiveness of different basic functional groups for the reactive compatibilization of polymer blends
- New polymer syntheses: 62. Thermotropic aromatic polyesters containing phosphate or phosphonate groups
- Dielectric, mechanical and rheological studies of phase separation and cure of a thermoplastic modified epoxy resin: incorporation of reactively terminated polysulfones
- The characterization and properties of nylon 1 3,1 3
- Stress stabilization of the orthorhombic and hexagonal phases of UHM PE gel-spun fibres
- Functionalization of polypropylene via melt mixing
- Physical ageing in a thermotropic liquid-crystalline polymer
- Phase separation in poly(methyl methacrylate)/polycarbonate blends
- The effects of charge density and concentration on the composition of polyelectrolyte complexes
- Relaxation behaviour of interpenetrating polymer networks based on crosslinked polyurethane and weakly crosslinked poly(butyl methacrylate) in a wide frequency range
- Selective conduction of alkali metal ions in poly(diaza-crown ether)
- Preparation and ionic conductivity of poly(oligo(oxypropylene) methacrylate)
- Miscibility and viscoelastic properties of blends of a liquid-crystalline polymer and poly(ethylene terephthalate)
- Estimation of interfacial interaction of poly(vinylidene fluoride-co-hexafluoro acetone) by contact angle
- Preparation, characterization and use in emulsion polymerization of acrylated alkyl ethoxylate surface-active monomers
- Structure-property relationships in annealed blends of linear low density polyethylene with isotactic polypropylene
- Temperature-sensitive ethanol permselectivity of poly(dimethylsiloxane) membrane by the modification of its surface with copoly(N-isopropylacrylamide/1 H,1 H,2H,2H-perfluorododecyl acrylate
- Native folded-chain cellulose II
- High temperature polymer foams
- Synthesis and lithium transport in ionically conducting crown ether polymers
- Benzocaine-modified maleic a n hyd ri d e-cyc I o h exyl - 1,3-d io xepi n copolymer: preparation and potential medical applications
- The effect of concentration of an environmental stress cracking agent on slow crack growth in polyethylenes
- Cyelotrimerization versus non-aromatic polyene formation in catalysed cure of an arylpropargyl-ether-terminated monomer
- Synthesis and test of a statistical copolymer the furtive chain
- Discrete strength levels in polypropylene films
- Preparation of =-hydroxy-eJ-carboxy-poly(methyl methacrylate) by anionic polymerization: 1. Utilization of initiator derived from 1 - [4- (2-tert-butyldimethylsi Ioxy)ethyl ] phenyl-1 - phenylethylene
- Synthesis of porous polymeric membranes by polymerization of micro-emulsions
- Investigation of hydrogel water in polyelectrolyte gels using differential scanning calorimetry
- Light-coloured conductive fillers for the production of charge dissipative polymers
- Nylon 6-rubber blends: 9. Crack initiation and propagation under impact conditions
- Isothermal crystallization of isotactic polypropylene in dotriacontane. IV. Effect of dilution and crystallization temperature on overall crystallization kinetics
- The branching characteristic of the spherulites of poly(ether ether ketone)
- Miscibility of three different poly(aryl ether ketones) with a high melting thermoplastic polyimide
- Heterogeneous nucleation of short glass fibre-polypropylene composites
- Adsorption kinetics of end-attaching triblock copolymers
- Variation in optical density during latex film formation: interdiffusion of fluorescence labelled polymers
- Kinetics of crystal growth in mixtures of isotactic polypropylene and liquid paraffin
- Pyrazolone azomethine dyes as effective photoinitiators of free radical polymerization
- Elastic modulus of the crystalline regions of poly(ethylene-2,6-naphthalate
- Miscibilities in binary copolymer systems
- Synthesis and characterization of sterically stabilized colloidal dispersions of polypyrrole using novel tailor-made water-soluble block copolymers of narrow molecular weight distribution
- Glass transition temperature of polystyrene microparticles
- Solvent-induced and salt-induced coil-helix transition of poly(L-lysine) salts in water/alcohol mixtures
- Calculation of WAXS crystallinities in multicomponent polymers: the total correction factor method
- Precursor polymers: 1. Synthesis and characterization of processable precursors to aramids
- Effect of side-chains on solution properties of N- (2-hyd roxypropyl)methacrylamide copolymers in aqueous solvents
- Crystal structures, phase transitions and energy calculations of poly(p-phenylene) oligomers
- Synthesis and characterization of poly [2,5-t h iophened iyl (d i met hylsi lylene) ]
